PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC FI

Copyright © 2021 VARO S i v u | 6 www.varo.com
VAROITUS: Tässä työkalussa on varusteena pika-asennuslisälaitteita
käytön aikana; älä yritä käyttää epäyhteensopivia lisälaitteita.
VAROITUS: Tarkasta, että käytettävä työkalu/lisälaite on tiukasti kiinni.
Sopimattomat ja huonosti kiinnitetyt työkalut/lisälaitteet voivat irrota käytön
aikana ja aiheuttaa vaaratilanteen.
7.2 Hiontapaperin asennus/vaihto
Tarrakiinnityksellä.
Laita hiontapaperi paikalleen ja paina käsin.
Paina hiontapaperia lyhyellä, voimakkaalla painalluksella hiontalevyn (12) tasaista pintaa
vasten ja kytke sähkötyökalun virta päälle.
Tämä varmistaa kunnollisen kiinnittymisen ja ehkäisee ennenaikaista kulumista.
Jos kärki on kulunut, vedä hiontapaperi irti, käännä sitä 120° ja laita se takaisin, tai vaihda
hiontapaperi.
7.3 Pölynpoiston asennus (kuva 4)
Ota pölynpoiston sovitin (10) ja ruuvaa se kiinni koneen alaosaan. Huomaa, että ruuvin on
oltava pölynpoiston sovittimen alaosassa, jotta voit ruuvata sen vaivattomasti ruuvireikään.
Kun pölynpoiston sovitin on asennettuna koneeseen, voit kiinnittää sille pölyputken (11).
Työnnä putki voimakkaasti paikalleen. Voit säätää putken suuntaa liikuttamalla sitä hiukan
haluttuun suuntaan.

8 KÄYTTÖ

8.1 Kytkeminen päälle ja pois päältä (kuva 5)
Tarkista ensin, että virtajohto ja pistotulppa eivät ole vaurioituneet.
Kytke pistotulppa virtalähteen pistorasiaan.
Sähkötyökalun kytkeminen päälle: liu’uta virtakatkaisin (2) eteenpäin asentoon (I).
Sähkötyökalun kytkeminen pois päälte: siirrä virtakatkaisin takaisin asentoon (O).
8.2 Nopeuden säätö (kuva 6)
Työkalun nopeuden voi säätää 6 eri asentoon. Asento 1 on hitain ja 6 nopein, ja nopeuden
saa vaihdettua värähtelytaajuuden säätimestä (4) asentoihin 1-6. Käyttäjän on ehkä
vaihdettava nopeutta työtehon optimoimiseksi.
8.3 Käyttövinkke
8.3.1 Vaihtotyökalun valinta
Lisälaite (kuva 7)
Materiaali
A: 3,2cm sahanterä
Puu, muovi, metalli, kipsi ja muut pehmeät materiaalit.
B: 6,5cm sahanterä
Puu, muovi, metalli, kipsi ja muut pehmeät materiaalit.
C: 2,0cm sahanterä
Puu, muovi, metalli, kipsi ja muut pehmeät materiaalit.
D: 1,0cm sahanterä
Puu, muovi, metalli, kipsi ja muut pehmeät materiaalit.
E: 8,5cm Segmenttiterä
Puu, muovi, metalli, kipsi ja muut pehmeät materiaalit.
F: 5,2cm Kaavintaterä
Sopii maalin ja kokolattiamattojen poistoon.
G: 9,3cm Karbidisegmenttiterä
Leikkaa uria kipsilevyyn, rappaukseen, kevytbetoniin ja
vastaaviin materiaaleihin
H: .3,2cm Karbiditerä
Leikkaa uria kipsilevyyn, rappaukseen, kevytbetoniin ja
vastaaviin materiaaleihin
I: Kolmiomainen hiontalevy
Hiontalevy 90x90x90-koon hiontapapereille.
J: Kolmiomaiset hiontapaperit
Erikarkeuksisia hiontapapereita:
120

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results