PowerPlus POWDP1515 manual

PowerPlus POWDP1515
8.1 · 1
PDF manual
 · 13 pages
English
manualPowerPlus POWDP1515

POWDP1515 EN

Copyright © 2018 VARO P a g e | 9 www.varo.com
9.4 Installing and Removing a Bit and a Drill (Fig 3)
This drill has a keyless chuck to prevent the bit or drill from loosening.
Hold the soft grip of the cordless drill firmly with one hand.
Turn ring A anticlockwise with the other hand until the drill chuck opening is large enough
to accept the tool.
Insert the drill or the screwdriver bit into the drill chuck.
Turn ring A clockwise until the tool is clamped tightly.
Remove the tool in the opposite way.
9.5 Switch (4)
The drill is started and stopped by depressing and releasing the ON/OFF switch trigger.
9.5.1 Switch lock (Fig 4)
The switch trigger can be locked in the center position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the direction of rotation selector in the center position.
9.5.2 Direction of rotation (Fig 5)
Direction of rotation is controlled by the direction of rotation selector located above the switch
trigger.
9.5.2.1 Clockwise rotation:
Right : To select forward rotation, release the on/off switch and push the forward/reverse lever
to the left side of the tool.
9.5.2.2 Anticlockwise rotation:
Left: To select reverse rotation, push the lever to the right side of the tool.
9.5.3 Variable speed
This tool has a variable speed switch that delivers higher speed and torque with increased
trigger pressure.
Speed is controlled by the amount of switch trigger depression.
9.6 Adjusting the torque
The torque is adjusted by rotating the torque setting ring; the torque is greater when the torque
setting is set on a higher position. The torque is less when the torque setting ring is set on a
low position1denote lowest and “ denote highest.
Torque is set by means of a torque setting according to different screw and different material,
you can adjust suitable torque, if the screw is long and material is hard, you can adjust the
bigger setting.
9.7 Speed selector (Fig 6)
NOTE Mark 1is Low speed position, mark 2 is High speed
position that moulding onto the button of two speed selector.
The drill has a two-speed gear train designed for drilling at 1 (LOW) or 2 (HIGH) speed. A gear
selector is located on top of the drill to select either low or high speed. When you push the
button forward and select low speed range, the speed will decrease but will provide more

Manual

View the manual for the PowerPlus POWDP1515 here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWDP1515 or do you need help? Ask your question here

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWDP1515 specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWDP1515.

General
BrandPowerPlus
ModelPOWDP1515 | POWDP1515
Productdrill machine
EAN5400338074226
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Product colorBlack, Orange
Weight & dimensions
Package weight4220 g
Package width120 mm
Package depth380 mm
Package height350 mm
Features
Drilling, Screwdriving
Chuck typeKeyless
Product designPistol grip drill
DrillingYes
ScrewdrivingYes
Performance
Chuck capacity (max)13 mm
Sound power level79 dB
Packaging content
Number of batteries included1 pc(s)
Battery charger includedYes
Carrying caseYes
Battery includedYes
Power
Power sourceBattery
Battery technologyLithium-Ion (Li-Ion)
Battery voltage20 V
Battery capacity1.5 Ah
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWDP1515 below.

How do I remove rust from my PowerPlus drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Is the manual of the PowerPlus POWDP1515 available in English?

Yes, the manual of the PowerPlus POWDP1515 is available in English .

Is your question not listed? Ask your question here

No results