PowerPlus POWDP1515 manual

PowerPlus POWDP1515
8.1 · 1
PDF manual
 · 13 pages
English
manualPowerPlus POWDP1515

POWDP1515 EN

Copyright © 2018 VARO P a g e | 5 www.varo.com
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.

6 ADDITIONAL SAFETY INSTRUCTIONS FOR DRILLS

Hold power tools by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring. Contact with a ″live″ wire will make exposed metal
parts of the tool ″live″ and shock the operator.
Let bit cool before touching, changing or adjusting it. Bits heat up dramatically while in
use, and can burn you.
Avoid unintentional starting. Prepare to begin work before turning on the tool.
Do not lay the tool down until it has come to a complete stop. Moving parts can grab the
surface and pull the tool out of your control.
When using a handheld power tool, maintain a firm grip on the tool with both hands to
resist starting torque.
Do not leave the tool unattended when the Battery Pack is connected. Turn off the tool,
and remove the Battery Pack before leaving.
The battery Charger gets hot during use. The Charger’s heat can build up to unsafe levels
and create a fire hazard if it does not receive adequate ventilation, due to an electrical
fault, or if it is used in a hot environment. Do not place the Charger on a flammable
surface. Do not obstruct any vents on the Charger. Especially avoid placing the Charger
on carpets and rugs; they are not only flammable, but they also obstruct vents under the
Charger. Place the Charger on a stable, solid, nonflammable surface (such as a stable

Manual

View the manual for the PowerPlus POWDP1515 here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWDP1515 or do you need help? Ask your question here

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWDP1515 specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWDP1515.

General
BrandPowerPlus
ModelPOWDP1515 | POWDP1515
Productdrill machine
EAN5400338074226
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Product colorBlack, Orange
Weight & dimensions
Package weight4220 g
Package width120 mm
Package depth380 mm
Package height350 mm
Features
Drilling, Screwdriving
Chuck typeKeyless
Product designPistol grip drill
DrillingYes
ScrewdrivingYes
Performance
Chuck capacity (max)13 mm
Sound power level79 dB
Packaging content
Number of batteries included1 pc(s)
Battery charger includedYes
Carrying caseYes
Battery includedYes
Power
Power sourceBattery
Battery technologyLithium-Ion (Li-Ion)
Battery voltage20 V
Battery capacity1.5 Ah
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWDP1515 below.

How do I remove rust from my PowerPlus drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Is the manual of the PowerPlus POWDP1515 available in English?

Yes, the manual of the PowerPlus POWDP1515 is available in English .

Is your question not listed? Ask your question here

No results