PowerPlus POWDP1515 manual

PowerPlus POWDP1515
8.1 · 1
PDF manual
 · 13 pages
English
manualPowerPlus POWDP1515

POWDP1515 EN

Copyright © 2018 VARO P a g e | 10 www.varo.com
power and torque. When using drill in the high speed range. Speed will increase but will
provide less power and torque. Use low speed for high power and torque application and high
speed for fast drilling applications.
Important: NEVER adjust this two speed selector whilst the drill is running.
Always let it come to a complete stop first.
9.8 LED light (Fig 7)
The LED work-light can light prior to motor running if you press the switch lightly, which keep
the work area to be lighted for checking clearly at first, and it lights also during your operation.
WARNING: Do not stare directly at the light beam. Never aim the beam at
any person or an object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not
directed towards the eye of a person for longer than 0.25s.

10 DRILLING

10.1 Drilling
Before use for drilling, the torque setting should be set on drill position .
When drilling hard smooth surface, use a center punch to mark the desired hole location. This
will prevent the drill bit from slipping off center as the hole is started. Hold the tool firmly and
place the tip of the drill or bit into the work piece, applying only enough pressure to keep the
bit cutting. Do not force or apply side pressure to elongate a hole.
10.2 Wood drilling
For maximum performance, use high speed steel bits for wood drilling. Turn the torque
adjustment ring on the drill to desired torque setting. Begin drilling at a very low speed to
prevent the bit from slipping off the starting point. Increase the speed as the drill bit bites into
the material. When drilling through holes, place a block of wood behind the workpiece to
prevent ragged or shintered edges on the back side of the hole.
10.3 Metal drilling
For maximum performance, use high speed steel bits for metal or steel drilling. Turn the
torque adjustment ring on the drill to desired torque setting. Begin drilling at a very low speed
to prevent the bit from slipping off the starting point. Maintain a speed and pressure which
allows cutting without overheating the bit.
Applying too much pressure will:
Overheat the drill
Wear the bearings
Bend or burn bits
Produce off-center or irregular shaped holes
When drilling large holes in metal, it is recommended that you drill with a small bit at first, then
finish with a large bit. Also, lubricate the bit with oil to improve drilling action and increase bit
life.

11 CLEANING AND MAINTENANCE

11.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.

Manual

View the manual for the PowerPlus POWDP1515 here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWDP1515 or do you need help? Ask your question here

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWDP1515 specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWDP1515.

General
BrandPowerPlus
ModelPOWDP1515 | POWDP1515
Productdrill machine
EAN5400338074226
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Product colorBlack, Orange
Weight & dimensions
Package weight4220 g
Package width120 mm
Package depth380 mm
Package height350 mm
Features
Drilling, Screwdriving
Chuck typeKeyless
Product designPistol grip drill
DrillingYes
ScrewdrivingYes
Performance
Chuck capacity (max)13 mm
Sound power level79 dB
Packaging content
Number of batteries included1 pc(s)
Battery charger includedYes
Carrying caseYes
Battery includedYes
Power
Power sourceBattery
Battery technologyLithium-Ion (Li-Ion)
Battery voltage20 V
Battery capacity1.5 Ah
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWDP1515 below.

How do I remove rust from my PowerPlus drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Is the manual of the PowerPlus POWDP1515 available in English?

Yes, the manual of the PowerPlus POWDP1515 is available in English .

Is your question not listed? Ask your question here

No results