PowerPlus Dual Power POWDPSET12 manual

PowerPlus Dual Power POWDPSET12
9.7 · 1
PDF manual
 · 12 pages
English
manualPowerPlus Dual Power POWDPSET12

POWDP2040 EN

Copyright © 2018 VARO P a g e | 9 www.varo.com
9.5 Installing or removing socket (Fig. 3)
Always be sure that the tool is switched off and the battery pack is removed before
installing or removing the socket.
To install the socket, push it onto the anvil of the tool until it locks into place. To remove
the socket, simply pull it off.
9.6 Switch (6)
The drill is started and stopped by depressing and releasing the ON/OFF switch trigger.
9.6.1 Switch lock (Fig. 4)
The switch trigger can be locked in the centre position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the direction of rotation selector in the centre position.
9.6.2 Direction of rotation (Fig. 5)
Direction of rotation is controlled by the direction of rotation selector located above the switch
trigger.
9.6.2.1 Clockwise rotation:
Right: To select forward rotation, release the on/off switch and push the forward/reverse lever
to the left side of the tool.
9.6.2.2 Anticlockwise rotation:
Left: To select reverse rotation, push the lever to the right side of the tool.
9.6.3 Variable speed
This tool has a variable speed switch that delivers higher speed and torque with increased
trigger pressure.
Speed is controlled by the amount of switch trigger depression.
9.7 LED light (Fig. 6)
There are 3 LED lights at the front of this tool.
The LED work-lights can light prior to motor running if you press the switch lightly, which keep
the work area to be lighted for checking clearly at first, and it lights also during your operation.
WARNING: Do not stare directly at the light beam. Never aim the beam at
any person or an object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not
directed towards the eye of a person for longer than 0.25 s.

10 GENERAL OPERATING INSTRUCTIONS

Make sure that the ON/OFF switch trigger is in the off-position and the direction of rotation
selector is centred, then attach the battery pack.
Attach the desired socket (sold separately) to the anvil.
Note: Use socket/extensions designed for impact wrench use.
Set the desired direction with the direction of rotation selector.

Manual

View the manual for the PowerPlus Dual Power POWDPSET12 here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the PowerPlus Dual Power POWDPSET12 or do you need help? Ask your question here

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus Dual Power POWDPSET12 specifications

Below you will find the product specifications and the manual specifications of the PowerPlus Dual Power POWDPSET12.

General
BrandPowerPlus
ModelDual Power POWDPSET12
Productdrill machine
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus Dual Power POWDPSET12 below.

How do I remove rust from my PowerPlus drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Is the manual of the PowerPlus Dual Power POWDPSET12 available in English?

Yes, the manual of the PowerPlus Dual Power POWDPSET12 is available in English .

Is your question not listed? Ask your question here

No results