PowerPlus Dual Power POWDPSET12 manual

PowerPlus Dual Power POWDPSET12
9.7 · 1
PDF manual
 · 12 pages
English
manualPowerPlus Dual Power POWDPSET12

POWDP2040 EN

Copyright © 2018 VARO P a g e | 10 www.varo.com
CAUTION: To prevent damage, allow the Anvil to come to a complete stop
before changing the direction of rotation.
Position the socket over the fastener.
Holding the handle firmly with one hand and the top of the housing with your other hand,
gently squeeze the ON/OFF switch trigger.
To prevent accidents, turn off the tool and remove its battery pack after use. Clean, then
store the tool indoors out of children’s reach.
Note: The amount of actual torque may vary depending on the cleanness
and condition of the threads and other factors. If tightening critical
components, chase threads before assembling components and check the
actual torque applied to the fastener with a mechanical torque wrench (not
supplied).

11 CLEANING AND MAINTENANCE

11.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2 Maintenance
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.

12 TECHNICAL DETAILS

Model nr.
POWDP2040
Rated voltage (direct current)
40 V
Rotation speed
0-2000 min-1
Socket type
½”
Max. torque
350 Nm

13 NOISE

Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
87 dB(A)
Acoustic power level LwA
98 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
6,7 m/s²
K = 1.5 m/s²

Manual

View the manual for the PowerPlus Dual Power POWDPSET12 here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the PowerPlus Dual Power POWDPSET12 or do you need help? Ask your question here

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus Dual Power POWDPSET12 specifications

Below you will find the product specifications and the manual specifications of the PowerPlus Dual Power POWDPSET12.

General
BrandPowerPlus
ModelDual Power POWDPSET12
Productdrill machine
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus Dual Power POWDPSET12 below.

How do I remove rust from my PowerPlus drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Is the manual of the PowerPlus Dual Power POWDPSET12 available in English?

Yes, the manual of the PowerPlus Dual Power POWDPSET12 is available in English .

Is your question not listed? Ask your question here

No results