PowerPlus Dual Power POWDPSET11 manual

PowerPlus Dual Power POWDPSET11
5.8 · 1
PDF manual
 · 13 pages
English
manualPowerPlus Dual Power POWDPSET11

POWDP1520 EN

Copyright © 2018 VARO P a g e | 9 www.varo.com
9.4 Installing and Removing a Bit and a Drill (Fig 3)
This drill has a keyless chuck to prevent the bit or drill from loosening and allows you to hand
tighten or release drill bit in the chuck jaws
Turn ring A anticlockwise with the other hand until the drill chuck opening is large enough
to accept the tool.
Insert the drill or the screwdriver bit into the drill chuck.
Turn ring A clockwise until the tool is clamped tightly.
Remove the tool in the opposite way.
9.5 Switch (4)
The drill is started and stopped by depressing and releasing the ON/OFF switch trigger.
9.5.1 Switch lock (Fig 4)
The switch trigger can be locked in the center position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the direction of rotation selector in the center position.
9.5.2 Direction of rotation (Fig 5)
Direction of rotation is controlled by the direction of rotation selector located above the switch
trigger.
9.5.2.1 Clockwise rotation:
Right: To select forward rotation, release the on/off switch and push the forward/reverse lever
to the left side of the tool.
9.5.2.2 Anticlockwise rotation:
Left: To select reverse rotation, push the lever to the right side of the tool.
9.5.3 Variable speed
This tool has a variable speed switch that delivers higher speed and torque with increased
trigger pressure.
Speed is controlled by the amount of switch trigger depression.
9.6 Adjusting the torque
The torque is adjusted by rotating the torque setting ring; the torque is greater when the torque
setting is set on a higher position. The torque is less when the torque setting ring is set on a
low position1denote lowest and “21 denote highest.
Torque is set by means of a torque setting according to different screw and different material,
you can adjust suitable torque, if the screw is long and material is hard, you can adjust the
bigger setting.
9.7 Function mode selector
Turn the function mode selector and let the pointer align to the impact mode that
selects the impact mode of action.
Turn the function mode selector and let the pointer align to the drill mode that selects
the drill mode of action.
Turn the function mode selector and let the pointer align to the screwdriver mode that
selects the screwdriver mode of action.

Manual

View the manual for the PowerPlus Dual Power POWDPSET11 here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the PowerPlus Dual Power POWDPSET11 or do you need help? Ask your question here

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus Dual Power POWDPSET11 specifications

Below you will find the product specifications and the manual specifications of the PowerPlus Dual Power POWDPSET11.

General
BrandPowerPlus
ModelDual Power POWDPSET11
Productdrill machine
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus Dual Power POWDPSET11 below.

How do I remove rust from my PowerPlus drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Is the manual of the PowerPlus Dual Power POWDPSET11 available in English?

Yes, the manual of the PowerPlus Dual Power POWDPSET11 is available in English .

Is your question not listed? Ask your question here

No results