Power Dynamics PDM-M604A manual

Power Dynamics PDM-M604A
7 · 2
PDF manual
 · 24 pages
English
manualPower Dynamics PDM-M604A
9

AUSPACKEN

Packen Sie das Gerät sofort nach Empfang aus und prüfen Sie den Inhalt. Wenn Teile fehlen oder beschädigt sind,
benachrichtigen Sie sofort den Spediteur und bewahren Sie die Verpackung auf. Falls ein Gerät ins Werk zurückgeschickt
werden muss, ist es wichtig, dass es in der Originalverpackung versandt wird.
Das Gerät darf nicht in Betrieb genommen werden, nachdem es von einem kalten in einen warmen Raum gebracht wurde. Das
dabei entstehende Kondenswasser kann unter Umständen Ihr Gerät zerstören. Lassen Sie das Gerät solange uneingeschaltet,
bis es Zimmertemperatur erreicht hat!

NETZANSCHLUSS

Die benötigte Versorgungsspannung steht auf dem Typenschild auf der Rückseite des Geräts. Die angegebenen Stromwerte
entsprechen einem Durchschnittswert bei normalem Betrieb. Alle Geräte müssen direkt ans Netz angeschlossen werden und
dürfen nicht über Dimmerpacks geschaltet werden. Bevor Sie eine Spannung anlegen, prüfen Sie, ob der Wert der zulässigen
Spannung entspricht.
Verbinden Sie immer das Gerät an einem geschützten Schaltkreis (Leistungsschalter oder Sicherung). Stellen Sie
sicher, das Gerät ist elektrisch geerdet, um das Risiko eines Stromschlags oder Feuer zu vermeiden.

BEDIENELEMENTE

1. Mikrofon Eingang
Symmetrische XLR-Eingangsbuchse
2. Line-Eingang
Symmetrische
6,3-mm-Klinkenbuchse. Sie können entweder symmetrisch oder unsymmetrisch
Anschlüssen.
3. Regler TRIM
Um den Eingangssignalpegel einzustellen. Um die beste Balance zwischen dem S/N-Verhältnis
und den Dynamikbereich zu erhalten, stellen Sie die Gain so ein, dass die Clip LED (8) leuchtet
gelegentlich kurz auf.
Der Mikrofoneingang hat ein Einstellungsbereich + 10dB bis +60dB. Die Line-Eingang liegt im
Bereich von + 10dB bis 40dB.
4. Equalizer
Dieses Drei-Band-Equalizer stellt die hohen, mittleren und tiefen Frequenzbereich des Kanals.
Stellen Sie den Wahlschalter auf "O" für die direkte Signal aus Schallquelle. Drehen Sie den
Regler im Uhrzeigersinn Frequenz zu erhöhen und biegen Sie rechts zu sacken Frequenz.
5. Regler FX
Einstellen des Effekt-Signalpegel.
6. Regler Pan
Der Pan-Regler bestimmt die Stereoposition des Kanalsignals . Wenn mit Untergruppen arbeiten,
können Sie die Pan-Regler verwenden, um das Signal zu einem Ausgang zuweisen, die Sie
zusätzliche Flexibilität in Aufnahmesituationen gibt.
7. Schalter ON/OFF
Schalten Sie diesen Schalter ein, um das Signal an die Master zu senden. Der Schalter leuchtet,
wenn er eingeschaltet ist.
8. Peak LED
Diese Peak LED dient als Übersteuerungsanzeige des Kanals. Leuchtet sie permanent, reduzieren
Sie die Eingangsverstärkung mit dem Trim-Regler und/oder drehen die Klangregler zurück.
9. Schalter Solo
Mit der Solofunktion können Sie das Monitorsignal auf den Solo-Bus (post-fader und post-mute)
oder den PFL-Bus (pre-fader und pre-mute) schalten. Auf diese Weise können Sie ein Kanalsignal
abhören, ohne das Hauptausgangssignal zu beeinflussen.
10. Kanalfader
Einstellen des Kanal-Signalpegel . Verwenden Sie diese Fader, die Balance zwischen den
verschiedenen Kanälen einzustellen.
11. Line Eingang
Dieser RCA-Eingang ist für Stereo-Audioquelle mit Line-Signal bestimmt. Verwenden Sie diese
Anschlüsse, wenn zum Beispiel ein CD-Player direkt in den Mischer angeschlossen.
12. Line Ausgang
Diese Cinch-Buchsen können an einen externen Recorder angeschlossen werden.
13. FX Ausgang
An diesem FX Ausgang können Sie das Signal des Ausspielwegs abgreifen und einem externen Effektgerät zuspielen.
Der Ausgang ist als unsymmetrische 6,3-mm-Klinkenbuchse ausgeführt.
14. Returns stereo
Diese Eingänge können zur Rückführung der von Effektgeräten kommenden Signale verwendet werden. Diese
werden, je nach Routing-Einstellung, dem Summensignal MAIN MIX oder den Subgruppen zugespielt. Die Eingänge
sind als symmetrische Klinkenbuchsen ausgeführt, es können aber auch unsymmetrische Klinkenstecker verwendet
werden.

Manual

View the manual for the Power Dynamics PDM-M604A here, for free. This manual comes under the category DJ gear and has been rated by 2 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Power Dynamics PDM-M604A or do you need help? Ask your question here

Need help?

Do you have a question about the Power Dynamics and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
S
SamJune 8, 2020

Where do I plug in my in ear monitors for best effect and how do I control them.

Power Dynamics PDM-M604A specifications

Below you will find the product specifications and the manual specifications of the Power Dynamics PDM-M604A.

The Power Dynamics PDM-M604A is a DJ mixer that offers a wide range of features for audio mixing and processing. With 6 channels, it allows for versatile connectivity and control of various audio sources. The inclusion of an amplifier ensures sufficient power for optimal sound performance. Equipped with 24-bit digital sound processing, this mixer delivers high-quality audio output with precise and accurate sound reproduction. The addition of an echo sound effect enhances the versatility and creativity of the mixing capabilities. The PDM-M604A provides XLR inputs, which are professional audio connectors commonly used in professional audio setups. Additionally, it features 1 line input with RCA connectors, allowing for easy connection of various audio devices such as CD players or MP3 players. To offer flexibility in connectivity, this DJ mixer includes a USB port, enabling users to connect and play audio directly from external storage devices such as USB flash drives. With 2 Euroblock output connectors, the PDM-M604A provides convenient output options for connecting to different audio systems or amplifiers. Its power consumption of 200 W ensures efficient operation. To maintain audio fidelity, the mixer has a low Total Harmonic Distortion (THD) of 0.01%, resulting in clean and clear sound reproduction. In conclusion, the Power Dynamics PDM-M604A is a feature-rich DJ mixer with 6 channels and an integrated amplifier. Its 24-bit digital sound processing and echo sound effect enhance the audio mixing capabilities, while the various input and output options provide flexibility in connectivity. With low power consumption and minimal Total Harmonic Distortion, this DJ mixer ensures reliable performance and high-quality sound output.

General
BrandPower Dynamics
ModelPDM-M604A | 172.612
ProductDJ gear
EAN8715693290806
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Channels quantity6 channels
Frequency range10 - 45000 Hz
Amplifier includedYes
Digital sound processing24 bit
Microphone Signal-to-Noise Ratio (SNR)112 dB
Technical details
DJ mixer-
Rack mounting-
Product colorBlack, Red
Video capability-
Sound effectsEcho
USB portYes
Ports & interfaces
XLR inYes
Line inputs (RCA)1
Number of Euroblock output connectors2
Microphone inYes
Power
Power consumption (typical)200 W
AC input voltage220-240 V
AC input frequency50-60 Hz
Outputs
Total Harmonic Distortion (THD)0.01 %
Maximum output level (master, unbalanced, L, R)1V
Inputs
Microphone input impedance2000 Ω
Packaging content
ManualYes
Weight & dimensions
Width370 mm
Depth350 mm
Height125 mm
Weight7300 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Power Dynamics PDM-M604A below.

What is the weight of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a weight of 7300 g.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

What is the height of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a height of 125 mm.

What is the width of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a width of 370 mm.

What is the depth of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a depth of 350 mm.

Does the Power Dynamics PDM-M604A have an amplifier included?

Yes, the Power Dynamics PDM-M604A includes an amplifier. This means that users do not need to purchase a separate amplifier for their DJ gear setup, making it convenient and cost-effective.

Does the Power Dynamics PDM-M604A have digital sound processing?

Yes, the Power Dynamics PDM-M604A has 24-bit digital sound processing. This ensures high-quality audio output and allows for precise control over sound effects and enhancements.

What sound effects does the Power Dynamics PDM-M604A have?

The Power Dynamics PDM-M604A has an echo sound effect. This feature can add depth and dimension to audio, providing a unique and professional touch to DJ performances.

Does the Power Dynamics PDM-M604A have XLR inputs?

Yes, the Power Dynamics PDM-M604A has XLR inputs. XLR connectors are commonly used in professional audio applications as they provide a balanced connection, reducing noise and improving audio quality.

How much power does the Power Dynamics PDM-M604A consume?

The Power Dynamics PDM-M604A consumes approximately 200 Watts of power. This power consumption level is relatively moderate, which is beneficial for energy efficiency and overall cost savings.

How do I connect external devices to the Power Dynamics PDM-M604A DJ gear?

To connect external devices to the Power Dynamics PDM-M604A DJ gear, follow these steps: 1. Locate the "CABLE CONNECTIONS" section in the manual (page 20). 2. Identify the type of external device you want to connect, such as a microphone, CD player, or laptop. 3. Use the appropriate cables to connect the external device to the corresponding input or output ports on the PDM-M604A DJ gear. 4. For example, if you want to connect a microphone, plug one end of an XLR cable into the microphone and the other end into one of the XLR input ports on the DJ gear. 5. If you want to connect a CD player or laptop, use RCA cables or a 3.5mm audio cable to connect the audio output of the device to the corresponding input ports on the DJ gear. 6. Make sure to connect the left and right channels correctly to maintain stereo sound. 7. If you want to use external effects, connect the effect device to the stereo return ports on the DJ gear. 8. This allows you to send the processed FX signal back into the DJ gear for further mixing. 9. Refer to the specific section in the manual for more detailed instructions on connecting specific external devices. Please note that the above steps are a general guide, and it's important to consult the manual for the Power Dynamics PDM-M604A DJ gear for specific instructions and illustrations related to your setup.

Why is there no sound coming from the Power Dynamics PDM-M604A DJ gear?

If there is no sound coming from the Power Dynamics PDM-M604A DJ gear, you can follow these steps to troubleshoot the issue: 1. Check the connections: Ensure that all cables are securely connected to the appropriate input and output ports on the DJ gear and external devices. Make sure the cables are not damaged or loose. 2. Verify the volume levels: Check the volume controls on the DJ gear and external devices. Increase the volume gradually to ensure it is not set too low or muted. 3. Test different audio sources: Connect different audio sources, such as a microphone or CD player, to the DJ gear to determine if the issue is specific to one device or across all inputs. This helps identify if the problem lies with the DJ gear or the connected device. 4. Check the power supply: Ensure that the DJ gear is properly powered on and connected to a functioning power outlet. Check the power indicator lights on the DJ gear to confirm it is receiving power. 5. Reset the DJ gear: If the above steps do not resolve the issue, try resetting the DJ gear by turning it off, disconnecting the power supply, waiting for a few minutes, and then reconnecting and powering it back on. If the problem persists after following these steps, it is recommended to consult the manual or contact customer support for further assistance.

How do I adjust the volume levels on the Power Dynamics PDM-M604A DJ gear?

To adjust the volume levels on the Power Dynamics PDM-M604A DJ gear, follow these steps: 1. Locate the "CONTROL ELEMENTS" section in the manual (page 2). 2. Identify the channel or input you want to adjust the volume for. 3. Find the corresponding channel fader on the DJ gear. This fader is used to adjust the level of the channel signal. 4. Slide the channel fader up to increase the volume or down to decrease the volume. Adjust the fader until you reach the desired volume level. 5. If you want to adjust the volume for a specific frequency band, locate the 3-Bands Equalizer section on the DJ gear. 6. Use the knobs for the high, mid, and low frequency bands to boost or attenuate the corresponding frequencies. This can help fine-tune the overall sound and balance. 7. If you are using external effects, locate the FX Control section on the DJ gear. 8. Adjust the FX Control knob to increase or decrease the level of the effect signal. 9. Additionally, there is a Main Mix Fader on the DJ gear that controls the output level of the main mix. Adjust this fader to control the overall volume of the DJ gear's output. Please note that the above steps are a general guide, and it's important to consult the manual for the Power Dynamics PDM-M604A DJ gear for specific instructions and illustrations related to your setup.

What should I do if the Power Dynamics PDM-M604A DJ gear is not powering on?

If the Power Dynamics PDM-M604A DJ gear is not powering on, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the DJ gear is properly connected to a power outlet and that the outlet is functioning. Try plugging in another device to verify if the outlet is working. 2. Verify the power switch: Make sure that the power switch on the DJ gear is in the "on" position. Sometimes, the switch may accidentally be turned off. 3. Check the power cable: Ensure that the power cable is securely connected to the DJ gear and the power outlet. Check for any signs of damage or loose connections. If the cable is damaged, try using a different power cable. 4. Reset the DJ gear: If the above steps do not resolve the issue, try resetting the DJ gear. Turn off the power switch, disconnect the power cable, wait for a few minutes, and then reconnect and power it back on. 5. Contact customer support: If the DJ gear still does not power on after following these steps, it is recommended to contact Power Dynamics customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Please note that these steps are general guidelines, and it's important to consult the manual for the Power Dynamics PDM-M604A DJ gear for any specific instructions or warnings related to power-related issues.

How do I troubleshoot audio distortion issues on the Power Dynamics PDM-M604A DJ gear?

To troubleshoot audio distortion issues on the Power Dynamics PDM-M604A DJ gear, you can follow these steps: 1. Check the input signal level: Ensure that the input signal level is not too high, as this can cause distortion. Adjust the TRIM control for the channel to find the optimal balance between the signal-to-noise ratio and the dynamic range. The peak LED should only occasionally and briefly light up on the highest input transients. 2. Verify the equalizer settings: Use the 3-Bands Equalizer to adjust the high, mid, and low frequency bands of the channel. Set the knobs to the "O" position for a flat response, and make fine adjustments by boosting or attenuating the corresponding frequency bands as needed. 3. Check the effect signal level: If you are using effects, adjust the FX control to ensure that the effect signal level is appropriate. Set it to a level that complements the overall mix without causing distortion. 4. Monitor the output level: Keep an eye on the peak LED and the channel fader levels. If the peak LED lights up frequently, reduce the TRIM control and check the channel EQ settings. Adjust the channel fader to maintain a balanced output level. 5. Test different audio sources and cables: Connect different audio sources and cables to the DJ gear to rule out any issues with specific devices or cables. Sometimes, faulty or incompatible equipment can cause audio distortion. If the audio distortion issue persists after following these steps, it is recommended to contact Power Dynamics customer support for further assistance.

Is the manual of the Power Dynamics PDM-M604A available in English?

Yes, the manual of the Power Dynamics PDM-M604A is available in English .

Is your question not listed? Ask your question here

No results