Power Dynamics PDM-M604A manual

Power Dynamics PDM-M604A
7 · 2
PDF manual
 · 24 pages
English
manualPower Dynamics PDM-M604A

18

INSTRUKCJA ROZPAKOWYWANIA

OSTRZE• ENIE! Niezwłocznie po otrzymaniu produktu, ostrożnie otwórz opakowanie, sprawdź czy zawartość zgadza się z
informacją w instrukcji, oraz czy towar nie nosi śladów uszkodzenia. Jeśli opakowanie lub produkt jest uszkodzony, spisz na
miejscu z kurierem protokół szkody. Zachowaj oryginalne opakowanie, na wypadek konieczności odesłania sprzętu do sklepu.
Jeśli urządzenie było wystawiane na działanie niskich temperatur (np. w czasie transportu), nie uruchamiaj go od razu!
Powstająca kondensacja może uszkodzić urządzenie. Poczekaj, aż sprzęt osiągnie temperaturę pokojową.

ZASILANIE

Na naklejce z tyłu urządzenia znajduje się informacja na temat parametrów zasilania. Sprawdź, czy napięcie z gniazdka
odpowiada temu na naklejce. W innym przypadku zestaw głośnikowy nie będzie działać lub może zostać uszkodzony. Zestaw
wymaga stałego zasilania.
Zawsze podłączaj urządzenie do sieci elektrycznej z odpowiednim bezpiecznikiem. Upewnij się, że urządzenie
posiada odpowiednie uziemienie, aby zapobiec porażeniu prądem lub pożarowi.

OPIS FUNKCJI

1. Wej• cie mikrofonowe
Zbalansowane wejście XLR.
2. Wej• cie liniowe
Zbalansowane wejście liniowe Jack 6.3mm. Możesz podłączyć zarówno kabel zbalansowany, jak i
niezbalansowany.
3. Regulacja TRIM
Regulacja poziomu głośności sygnał wejściowego. Aby uzyskać najlepszy stosunek S/N do
dynamiki, ustaw pokrętło w takiej pozycji, aby wskaźnik przesterowania (9) zapalał się tylko
chwilowo, w najgłośniejszych momentach utworu. Skala -60 do +10 jest dedykowana wejściu
mikrofonowemu, natomiast skala -40 do +10 dotyczy wejścia liniowego.
4. 3-pasmowy korektor graficzny
3-pasmowy korektor graficzny reguluje tony wysokie, średnie oraz niskie dla danego kanału.
Ustawienie pokrętła w pozycji 0 oznacza płaską charakterystykę dla danej częstotliwości.
Ustawienie pokrętła w prawo podbija częstotliwość, natomiast przekręcenie w lewo zmniejsza
podbicie danej częstotliwości.
5. FX Control
Pokrętło służące do ustawienia poziomu efektu wysyłki danego kanału. Pokrętło jest post fader i
post mute.
6. Regulacja panoramy
Pokrętło PAN reguluje pozycję kanału w obrazie stereo. Podczas pracy z podgrupami, możesz
użyć pokrętła PAN, aby przypisać sygnał tylko do jednego wyjścia daje to więcej możliwości
podczas nagrywania. Na przykład, podczas routowania do podgrup 3 i 4, pokrętło wykręcone
maksymalnie w lewo przekieruje sygnał tylko do grupy 3, natomiast w odwrotną stronę do grupy 4.
7. Przełą cznik ON/OFF
Wciśnij przycisk, aby wysyłać sygnał z tego kanału do szyny głównej. Przycisk zaświeci się na
pomarańczowo, gdy jest aktywny.
8. CLIP LED
Dioda przesterowania zaświeci się, gdy sygnał wejściowy ma zbyt wysoki poziom głośności. Jeśli
to nastąpi, zmniejsz odrobinę poziom TRIM. Jeśli to konieczne, zmień także ustawienia korektora
graficznego na danym kanale.
9. Solo Switch
Przełącznik jest używany, aby umożliwiać odsłuch kanału po tłumiku (Solo In Place) albo przed
tłumikiem (Pre Fader Listen). Umożliwia to odsłuchanie danego kanału bez wpływu na szynę
główną (master).
10. Tłumik kanału
Regulacja poziomu głośności kanału. Używaj tych suwaków, aby regulować głośność
poszczególnych kanałów.
11. Wej•cie liniowe
Złącza RCA służące do podłączenia innych źródeł dźwięku (np. odtwarzacz CD/MP3/telefon).
12. Wyj•cie liniowe
Za pomocą wyjść RCA można podłączyć zewnętrzne urządzenie nagrywające.
13. FX Output
Wysyłka AUX dostarcza miks master (przy użyciu pokręteł FX na danym kanale).
14. Powroty stereofoniczne
Powroty AUX służą jako powroty dla efektów (utworzonych przez wysyłki aux post fader) poprzez podłączenie
zewnętrznego procesora efektów. Jeśli użyte jest tylko lewe gniazdo, automatycznie przełącza się w tryb mono.
15. Wyj•cie MASTER
Gniazda wyjściowe XLR dla sygnału master. Możesz pod nie podłączyć np. zestawy głośnikowe aktywne, lub
wzmacniacz napędzający zestawy pasywne.
16. Wywietlacz efektu
Pokazuje wybrany efekt.

Manual

View the manual for the Power Dynamics PDM-M604A here, for free. This manual comes under the category DJ gear and has been rated by 2 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Power Dynamics PDM-M604A or do you need help? Ask your question here

Need help?

Do you have a question about the Power Dynamics and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
S
SamJune 8, 2020

Where do I plug in my in ear monitors for best effect and how do I control them.

Power Dynamics PDM-M604A specifications

Below you will find the product specifications and the manual specifications of the Power Dynamics PDM-M604A.

The Power Dynamics PDM-M604A is a DJ mixer that offers a wide range of features for audio mixing and processing. With 6 channels, it allows for versatile connectivity and control of various audio sources. The inclusion of an amplifier ensures sufficient power for optimal sound performance. Equipped with 24-bit digital sound processing, this mixer delivers high-quality audio output with precise and accurate sound reproduction. The addition of an echo sound effect enhances the versatility and creativity of the mixing capabilities. The PDM-M604A provides XLR inputs, which are professional audio connectors commonly used in professional audio setups. Additionally, it features 1 line input with RCA connectors, allowing for easy connection of various audio devices such as CD players or MP3 players. To offer flexibility in connectivity, this DJ mixer includes a USB port, enabling users to connect and play audio directly from external storage devices such as USB flash drives. With 2 Euroblock output connectors, the PDM-M604A provides convenient output options for connecting to different audio systems or amplifiers. Its power consumption of 200 W ensures efficient operation. To maintain audio fidelity, the mixer has a low Total Harmonic Distortion (THD) of 0.01%, resulting in clean and clear sound reproduction. In conclusion, the Power Dynamics PDM-M604A is a feature-rich DJ mixer with 6 channels and an integrated amplifier. Its 24-bit digital sound processing and echo sound effect enhance the audio mixing capabilities, while the various input and output options provide flexibility in connectivity. With low power consumption and minimal Total Harmonic Distortion, this DJ mixer ensures reliable performance and high-quality sound output.

General
BrandPower Dynamics
ModelPDM-M604A | 172.612
ProductDJ gear
EAN8715693290806
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Channels quantity6 channels
Frequency range10 - 45000 Hz
Amplifier includedYes
Digital sound processing24 bit
Microphone Signal-to-Noise Ratio (SNR)112 dB
Technical details
DJ mixer-
Rack mounting-
Product colorBlack, Red
Video capability-
Sound effectsEcho
USB portYes
Ports & interfaces
XLR inYes
Line inputs (RCA)1
Number of Euroblock output connectors2
Microphone inYes
Power
Power consumption (typical)200 W
AC input voltage220-240 V
AC input frequency50-60 Hz
Outputs
Total Harmonic Distortion (THD)0.01 %
Maximum output level (master, unbalanced, L, R)1V
Inputs
Microphone input impedance2000 Ω
Packaging content
ManualYes
Weight & dimensions
Width370 mm
Depth350 mm
Height125 mm
Weight7300 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Power Dynamics PDM-M604A below.

What is the weight of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a weight of 7300 g.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

What is the height of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a height of 125 mm.

What is the width of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a width of 370 mm.

What is the depth of the Power Dynamics PDM-M604A?

The Power Dynamics PDM-M604A has a depth of 350 mm.

Does the Power Dynamics PDM-M604A have an amplifier included?

Yes, the Power Dynamics PDM-M604A includes an amplifier. This means that users do not need to purchase a separate amplifier for their DJ gear setup, making it convenient and cost-effective.

Does the Power Dynamics PDM-M604A have digital sound processing?

Yes, the Power Dynamics PDM-M604A has 24-bit digital sound processing. This ensures high-quality audio output and allows for precise control over sound effects and enhancements.

What sound effects does the Power Dynamics PDM-M604A have?

The Power Dynamics PDM-M604A has an echo sound effect. This feature can add depth and dimension to audio, providing a unique and professional touch to DJ performances.

Does the Power Dynamics PDM-M604A have XLR inputs?

Yes, the Power Dynamics PDM-M604A has XLR inputs. XLR connectors are commonly used in professional audio applications as they provide a balanced connection, reducing noise and improving audio quality.

How much power does the Power Dynamics PDM-M604A consume?

The Power Dynamics PDM-M604A consumes approximately 200 Watts of power. This power consumption level is relatively moderate, which is beneficial for energy efficiency and overall cost savings.

How do I connect external devices to the Power Dynamics PDM-M604A DJ gear?

To connect external devices to the Power Dynamics PDM-M604A DJ gear, follow these steps: 1. Locate the "CABLE CONNECTIONS" section in the manual (page 20). 2. Identify the type of external device you want to connect, such as a microphone, CD player, or laptop. 3. Use the appropriate cables to connect the external device to the corresponding input or output ports on the PDM-M604A DJ gear. 4. For example, if you want to connect a microphone, plug one end of an XLR cable into the microphone and the other end into one of the XLR input ports on the DJ gear. 5. If you want to connect a CD player or laptop, use RCA cables or a 3.5mm audio cable to connect the audio output of the device to the corresponding input ports on the DJ gear. 6. Make sure to connect the left and right channels correctly to maintain stereo sound. 7. If you want to use external effects, connect the effect device to the stereo return ports on the DJ gear. 8. This allows you to send the processed FX signal back into the DJ gear for further mixing. 9. Refer to the specific section in the manual for more detailed instructions on connecting specific external devices. Please note that the above steps are a general guide, and it's important to consult the manual for the Power Dynamics PDM-M604A DJ gear for specific instructions and illustrations related to your setup.

Why is there no sound coming from the Power Dynamics PDM-M604A DJ gear?

If there is no sound coming from the Power Dynamics PDM-M604A DJ gear, you can follow these steps to troubleshoot the issue: 1. Check the connections: Ensure that all cables are securely connected to the appropriate input and output ports on the DJ gear and external devices. Make sure the cables are not damaged or loose. 2. Verify the volume levels: Check the volume controls on the DJ gear and external devices. Increase the volume gradually to ensure it is not set too low or muted. 3. Test different audio sources: Connect different audio sources, such as a microphone or CD player, to the DJ gear to determine if the issue is specific to one device or across all inputs. This helps identify if the problem lies with the DJ gear or the connected device. 4. Check the power supply: Ensure that the DJ gear is properly powered on and connected to a functioning power outlet. Check the power indicator lights on the DJ gear to confirm it is receiving power. 5. Reset the DJ gear: If the above steps do not resolve the issue, try resetting the DJ gear by turning it off, disconnecting the power supply, waiting for a few minutes, and then reconnecting and powering it back on. If the problem persists after following these steps, it is recommended to consult the manual or contact customer support for further assistance.

How do I adjust the volume levels on the Power Dynamics PDM-M604A DJ gear?

To adjust the volume levels on the Power Dynamics PDM-M604A DJ gear, follow these steps: 1. Locate the "CONTROL ELEMENTS" section in the manual (page 2). 2. Identify the channel or input you want to adjust the volume for. 3. Find the corresponding channel fader on the DJ gear. This fader is used to adjust the level of the channel signal. 4. Slide the channel fader up to increase the volume or down to decrease the volume. Adjust the fader until you reach the desired volume level. 5. If you want to adjust the volume for a specific frequency band, locate the 3-Bands Equalizer section on the DJ gear. 6. Use the knobs for the high, mid, and low frequency bands to boost or attenuate the corresponding frequencies. This can help fine-tune the overall sound and balance. 7. If you are using external effects, locate the FX Control section on the DJ gear. 8. Adjust the FX Control knob to increase or decrease the level of the effect signal. 9. Additionally, there is a Main Mix Fader on the DJ gear that controls the output level of the main mix. Adjust this fader to control the overall volume of the DJ gear's output. Please note that the above steps are a general guide, and it's important to consult the manual for the Power Dynamics PDM-M604A DJ gear for specific instructions and illustrations related to your setup.

What should I do if the Power Dynamics PDM-M604A DJ gear is not powering on?

If the Power Dynamics PDM-M604A DJ gear is not powering on, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the DJ gear is properly connected to a power outlet and that the outlet is functioning. Try plugging in another device to verify if the outlet is working. 2. Verify the power switch: Make sure that the power switch on the DJ gear is in the "on" position. Sometimes, the switch may accidentally be turned off. 3. Check the power cable: Ensure that the power cable is securely connected to the DJ gear and the power outlet. Check for any signs of damage or loose connections. If the cable is damaged, try using a different power cable. 4. Reset the DJ gear: If the above steps do not resolve the issue, try resetting the DJ gear. Turn off the power switch, disconnect the power cable, wait for a few minutes, and then reconnect and power it back on. 5. Contact customer support: If the DJ gear still does not power on after following these steps, it is recommended to contact Power Dynamics customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Please note that these steps are general guidelines, and it's important to consult the manual for the Power Dynamics PDM-M604A DJ gear for any specific instructions or warnings related to power-related issues.

How do I troubleshoot audio distortion issues on the Power Dynamics PDM-M604A DJ gear?

To troubleshoot audio distortion issues on the Power Dynamics PDM-M604A DJ gear, you can follow these steps: 1. Check the input signal level: Ensure that the input signal level is not too high, as this can cause distortion. Adjust the TRIM control for the channel to find the optimal balance between the signal-to-noise ratio and the dynamic range. The peak LED should only occasionally and briefly light up on the highest input transients. 2. Verify the equalizer settings: Use the 3-Bands Equalizer to adjust the high, mid, and low frequency bands of the channel. Set the knobs to the "O" position for a flat response, and make fine adjustments by boosting or attenuating the corresponding frequency bands as needed. 3. Check the effect signal level: If you are using effects, adjust the FX control to ensure that the effect signal level is appropriate. Set it to a level that complements the overall mix without causing distortion. 4. Monitor the output level: Keep an eye on the peak LED and the channel fader levels. If the peak LED lights up frequently, reduce the TRIM control and check the channel EQ settings. Adjust the channel fader to maintain a balanced output level. 5. Test different audio sources and cables: Connect different audio sources and cables to the DJ gear to rule out any issues with specific devices or cables. Sometimes, faulty or incompatible equipment can cause audio distortion. If the audio distortion issue persists after following these steps, it is recommended to contact Power Dynamics customer support for further assistance.

Is the manual of the Power Dynamics PDM-M604A available in English?

Yes, the manual of the Power Dynamics PDM-M604A is available in English .

Is your question not listed? Ask your question here

No results