View the manual for the Poulan Pro PP19A42 here, for free. This manual comes under the category lawnmowers and has been rated by 10 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Poulan Pro PP19A42 or do you need help? Ask your question here

The Poulan Pro PP19A42 is a gasoline-powered riding lawnmower designed to efficiently cut a large area of grass. The 42-inch cutting deck is made of durable stamped steel and can mow up to 2.5 acres per hour. The mower is equipped with a powerful 19 horsepower Briggs & Stratton engine and has a top speed of 5.5 mph in forward and reverse. It features a 6-position cutting height adjustment system for cutting grass at varying heights. The steering wheel is comfortable to grip and provides easy maneuverability around obstacles. The mower has a tight turning radius of 18 inches, allowing it to turn around in tight spaces. The hydrostatic transmission allows for smooth and seamless gear changes, making it easy for anyone to operate. The mower has a standard 1.5-gallon fuel tank, which provides ample time for mowing large areas without needing to refuel. Fuel gauge located on the side of the mower makes it easy to check the fuel level. The PP19A42 also features a comfortable high-back seat, with a built-in cup holder. It also has headlights to provide visibility while mowing at night. The mower comes with a two-year limited warranty. Overall, the Poulan Pro PP19A42 is a reliable and efficient riding lawnmower, making it a great choice for those who need to mow a large area of grass.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Poulan Pro PP19A42 below.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
Ensure the mower's handle is securely attached by fastening the bolts and nuts, align the wheels correctly and firmly attach them by tightening the wheel nuts, and finally, connect the battery cables if applicable.
First, ensure the fuel tank is filled with fresh gasoline, check the oil level and add if necessary, set the choke lever to the correct position, engage the parking brake, and fasten the seat switch. Additionally, make sure the spark plug is clean and the ignition switch is in the ON position.
Locate the cutting height adjustment lever and move it to the desired position according to your preferred cutting height. Ensure both sides are adjusted equally to obtain an even cut.
Check if the cutting blades are dull or damaged and replace them if necessary. Ensure the cutting deck is clean and free from debris that could hinder proper grass flow. Finally, adjust the cutting height to a lower setting if the grass is particularly tall or dense.
Immediately disengage the mower blades and turn off the engine. Inspect for any debris, such as rocks or branches, that may be obstructing the blades. Clear the obstruction and ensure the mower deck is free from any blockages. Restart the engine and engage the blades cautiously to resume mowing.
Yes, the manual of the Poulan Pro PP19A42 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Poulan and is the answer not in the manual?
Question and answer
Number of questions: 32Will is damage the mower if you drive it forward and the key is in the ROS position ?
1 comment
Yes, driving the lawnmower forward with the key in the Reverse Operation System (ROS) position can potentially damage the mower. It is important to always ensure the key is in the correct operating position to prevent any potential harm to the mower.
This answer is automatically generatedWhat is the parts number for the flywheel fan for the 19 hp Briggs and Stratton lawn tractor model PP19A42?
What are the specs for the valve gap on a PP 19 A4 two
What size replacement belt is out there for it I can find one that fits
Drive and reverse seems to bind up, has already popped the c clip off of the shaft replaced clip and is hard to go forward or reverse
where is the cruise control on the Poulan Pro 19A42 lawn mower?
What is the part number for the ignition switch
what battery does poulan 19A42 use...current 300ca wont turn over
How Can I repplace a C Clip with it flying off thru the air???
HOW DO YOU ADJUST THE BRAKES ON A POULAN PRO PP19A42?