View the manual for the Polar F92TI here, for free. This manual comes under the category sport watches and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Polar F92TI or do you need help? Ask your question here
| Brand | Polar |
| Model | F92TI |
| Product | sport watch |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Polar F92TI below.
It is sensible for you to switch off your sport watch at night, this ensures longer battery life.
No, no internet is required to receive GPS.
The abbreviation GPS stands for 'Global Positioning System'.
GPS is a system that can be used all over the globe to determine your location by means of satellites.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
An adult's resting heart rate is between 60 and 100 beats per minute.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
To troubleshoot inaccurate heart rate readings on your Polar F92TI sport watch, follow these steps: 1. Check the proximity: Ensure that your Polar wrist unit is within the transmission range and not further than 3 feet/1 meter from the Polar Transmitter you are wearing. 2. Verify strap tightness: Make sure that the elastic strap has not become loose during exercise. Adjust it to ensure a snug fit. 3. Moisture on electrodes: Ensure that the electrodes of the transmitter are moistened. Dry electrodes may result in inaccurate readings. 4. Avoid interference: Make sure that there is no other heart rate transmitter within the reception range (3 feet/1 meter). Nearby heart rate monitors can interfere with the readings. 5. Consider cardiac arrhythmia: If you have a cardiac event or experience irregular heart rate readings, consult your physician for further evaluation. If you encounter any other issues or if the problem persists, refer to the troubleshooting section of the manual or contact an authorized Polar Service Center for assistance.
If the battery life of your Polar F92TI sport watch is shorter than expected, you can try the following steps to troubleshoot the issue: 1. Check the battery type: Ensure that you are using the correct battery type specified for the Polar F92TI sport watch, which is CR2025. 2. Replace the battery: If the current battery is old or depleted, replace it with a new CR2025 battery. Follow the instructions in the manual to safely replace the battery. 3. Clean the connector: Regularly clean the connector of the sport watch using a mild soap and water solution. Avoid using alcohol or abrasive materials, as they can damage the connector. 4. Avoid extreme temperatures: Keep the sport watch away from extreme cold (below 14°F/-10°C) and heat (above 122°F/+50°C), as these temperatures can affect the battery life. 5. Limit backlight and alarm usage: Excessive use of the backlight and alarm signals can drain the battery more rapidly. Minimize their usage to extend the battery life. If the issue persists or if you need further assistance, it is recommended to contact an authorized Polar Service Center for professional support.
To troubleshoot water damage to your Polar F92TI sport watch, follow these steps: 1. Avoid operating buttons underwater: To maintain the water resistance of your Polar F92TI sport watch, do not operate the buttons of the wrist unit underwater. This can prevent water from entering the watch and causing damage. 2. Check for short-circuiting: Pool water with a high chlorine content or seawater can be conductive and may cause the electrodes of the transmitter to short-circuit. This can prevent accurate heart rate measurements. Ensure that the electrodes are not short-circuited and are able to detect ECG signals. 3. Minimize water resistance: During competitive swimming or strenuous muscle movement in the water, water resistance can shift the transmitter on your body to a location where it cannot pick up ECG signals. Be mindful of your movements to minimize water resistance. 4. Understand ECG signal strength: The strength of the ECG signal can vary depending on individual tissue composition. In a water environment, the percentage of people experiencing difficulties in heart rate measurement is higher compared to other uses. By following these steps, you can troubleshoot water damage to your Polar F92TI sport watch and ensure accurate heart rate measurements.
If the strap of your Polar F92TI sport watch is uncomfortable or breaks, you can follow these steps to address the issue: 1. Adjust the strap: Ensure that the strap is properly adjusted to fit your wrist comfortably. Use the buckle or fastening mechanism to tighten or loosen the strap as needed. 2. Clean the strap: Regularly clean the strap using a mild soap and water solution. Gently scrub the strap with a soft cloth or brush to remove any dirt or sweat buildup that may cause discomfort. 3. Replace the strap: If the strap is broken or damaged beyond repair, you can purchase a replacement strap from an authorized Polar retailer or service center. Follow the instructions in the manual or seek professional assistance to properly replace the strap. 4. Consider alternative strap options: Polar offers a range of strap options for their sport watches. If the original strap is uncomfortable, you may explore alternative strap options that better suit your preferences and needs. By following these steps, you can address discomfort or breakage issues with the strap of your Polar F92TI sport watch and continue using it comfortably.
To reset the default settings on your Polar F92TI sport watch, follow these steps: 1. Enter the Options mode: From the Time of day display, press the Up or Down button until "OPTIONS" is displayed. Press the START/STOP/OK button to enter the Options mode. 2. Access User Information settings: In the Options mode, "USER SET" will be displayed. Press the START/STOP/OK button to enter the user information loop. 3. Select User 1 or User 2: If you want to reset the settings for User 1 or User 2, press the Up or Down button to select the desired user. Press the START/STOP/OK button to lock your selection. 4. Reset the settings: To reset the settings to their default values, you can either set the weight of the selected user to zero or make changes to other settings as desired. 5. Exit the Options mode: Once you have made the necessary changes, you can either continue adjusting other settings or return to the Time of day display by pressing and holding the START/STOP/OK button. By following these steps, you can reset the default settings on your Polar F92TI sport watch and customize them according to your preferences.
Yes, the manual of the Polar F92TI is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Polar and is the answer not in the manual?
Question and answer
Number of questions: 0