PocketWizard PowerMC2 manual

PocketWizard PowerMC2
(1)
  • Number of pages: 14
  • Filetype: PDF

Quick Guide

MAKE IT POSSIBLE

Please read this Quick Guide thoroughly before operating. Also, review
the product manuals for your camera, ash systems, and other
PocketWizard radios.
This PocketWizard radio runs on powerful software called
ControlTL
®
- Control The Light. It can be congured for your specic
needs using the PocketWizard Utility which can be downloaded at:
www.PocketWizard.com/support/downloads
The PowerMC2 Receiver requires a transmitting PocketWizard radio and a
compatible Einstein
E640 Flash. A transmitting ControlTL radio like a MiniTT1
®
or FlexTT5
®
is required for full functionality.
The PowerMC2 requires no batteries. It is powered from the remote port of your
Einstein
E640 Flash.
UPDATE FIRMWARE: Be sure to upgrade all your PocketWizard ControlTL
radios (including this one) to the latest rmware for proper functionality.
For PowerMC2 to function, Einstein
E640 Flash must have rmware
version 26 or later installed.

Receiver with

®

for Einstein

E640

PocketWizard PowerMC2

Need help?

Number of questions: 0

Do you have a question about the PocketWizard PowerMC2 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other PocketWizard PowerMC2 owners to properly answer your question.

View the manual for the PocketWizard PowerMC2 here, for free. This manual comes under the category Remote triggers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the PocketWizard PowerMC2 or do you need help? Ask your question here

PocketWizard PowerMC2 specifications

General
Brand PocketWizard
Model PowerMC2
Product Remote trigger
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the PocketWizard PowerMC2.

Is your question not listed? Ask your question here