Planet VPA-100 manual

Planet VPA-100
7.4 · 1
PDF manual
 · 25 pages
manualPlanet VPA-100
Internet Telephony Paging System

3.3.2 SIP Advanced Configuration

Click Advancedand go to SIP Advanced Configuration. You can change the configuration based on your
requirements, which include Local SIP Port and RTP/RTCP DSCP. After modification, please click “Submit”.

SIP Advanced Configuration

Item Description
Local SIP Port
Local SIP Port.
Default is 5060.
T1 Timer
Timer for sending SIP message (by second).
Default is 500 ms.
RTP Base Port
RTP base port of voice data. Default is 8000.
RTCP Base Port
RTCP base port for voice data. Default is 8001.
Echo Canceller
Set echo cancellation.
Default is enabled.
Noise Suppression
Set noise suppression.
Default is enabled.
Adaptive Jitter Buffer
Set adaptive jitter buffer when receiving/sending SIP voice.
Default is enabled.
SIP DSCP (Hex Set the hex value of SIP DSCP(Differentiated Services Code Point.
Default is b8.
Set hex value of RTP DSC.
Default is 68.

View the manual for the Planet VPA-100 here, for free. This manual comes under the category Network cards/adapters and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Planet VPA-100 or do you need help? Ask your question here

Need help?

Do you have a question about the Planet and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Planet owners to provide you with a good answer.

Number of questions: 0

VPA-100 | VPA-100
Network card/adapter
User manual (PDF)
Ethernet LAN data rates10 Mbit/s
Power over Ethernet (PoE)
Networking standardsIEEE 802.3af
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Weight & dimensions
Dimensions (WxDxH)117 x 84 x 31 mm
Weight344 g
Packaging content
Number of products included1 pc(s)
Power cord included
Power over Ethernet (PoE) voltage3.3 V
Input current1 A
Input voltage5 V
Power consumption (max)2 W
Ports & interfaces
DC-in jack
Ethernet LAN (RJ-45) ports2
CertificationCE, FCC
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Planet VPA-100 below.

Is your question not listed? Ask your question here

No results