Click 【SIP Configuration】and navigate to 【SIP Basic Configuration】. Here you can configure the Server
Address, SIP Extension, Autoanswer, Audio Output Mode (Default Speaker), etc.
After configuration is completed, please click “Submit”.
SIP Basic Configuration
Item Description
Server Address
IP Address of IP PBX
Proxy Address
Proxy address of SIP proxy. Normally the proxy server and IP PBX
are the same and therefore the IP address is the same.
SIP Extension
Registered SIP extension number provided by IP PBX
Password
Password of registered extension provided by IP PBX
Autoanswer
The time of Auto answer (by second).
Default is 1; if set as off, there is no auto answer.
Incoming Ring
This option is to allow ringing if there is any incoming call.
Audio Output Mode
Output mode of audio (Speaker or Handset).
Default is Speaker.
18
View the manual for the Planet VPA-100 here, for free. This manual comes under the category Network cards/adapters and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Planet VPA-100 or do you need help? Ask your question here
Do you have a question about the Planet and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Planet owners to provide you with a good answer.
Need help?
Do you have a question about the Planet and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Planet owners to provide you with a good answer.
Number of questions: 0