Planet IHD-210PT manual

Planet IHD-210PT
6.6 · 1
PDF manual
 · 8 pages
English
manualPlanet IHD-210PT
– 1 –
3
2
4
6 7 8 9
Transmitter (IHD-210PT)
1 2 3 5
6 7 8 9
Receiver (IHD-210PR)

Verify The Contents Inside Package Box

The package should contain the following items plus IHD-210 series. If
any item is missing or damaged, please contact the seller immediately.
Quick Installation Guide
IR Emitter Cable
(Comes with Transmitter)
IR Receiver Cable
(Comes with Receiver)

Product Outlook & Functions

1 2 3 4 5

Position Description Function
1 DC 5V
5V/2A DC power input.
Only use one power source, either from DC
or from 802.3af/at PoE+ Ethernet switch.
2
Ethernet
(PoE)
Connect to a LAN Switch.
IGMP snooping and Jumbo Frame
supported Gigabit IEEE 802.3af/at PoE+
Ethernet switch is recommended.
LED:
1. LAN LED (green color):
This LED will be ashing while network is
accessing via Ethernet.
2. Power LED (orange color):
When the device is powered on, and the
device is connected to Ethernet switch,
the LED will be always on.
3 HDMI Out
HDMI Type-A female connector for video
output.
4 HDMI In
HDMI Type-A female connector for
connecting to the HDMI source. (Only built-in
on Transmitter)
5 IR
Transmitter: 3.5mm jack for IR emitter cable
to control video source device.
Receiver: 3.5mm jack for IR receiver cable
to receive signal from remote controller.
6 RS-232
DB-9 female connector for RS-232
bi-directional remote extension.
7 Channel Display group indication.
8 Group
Group conguration, 6-bit switch for 64
stream channel selection.
9 Reset
Power on the device and press the reset
button for over one second to restore it to
factory default settings.

Installation

1. Connect the video source to the Transmitter/Sender (IHD-210PT)
Units HDMI In interface.
2. Connect the monitor to the Receiver (IHD-210PR) Units HDMI Out
interface.
3. Use Cat5e/6 cables (EIA/TIA 568B industry standard compliant) for
connection between Transmitter/Receiver and the IEEE 802.3af/at
PoE+ switch.
4. Set an identical ID number on DIP switch for all units of the same
group.
5. Apply the proper power to all connecting devices.

Note

It is suggested using the Gigabit IEEE 802.3af/
at PoE+ Ethernet switch with IGMP snooping and
Jumbo Frame to ensure optimal transmission quality.
If users encounter no screen display in computer
connection:
1. Make sure the device cables are correctly and
rmly attached.
2. Set your display device’s (TV, monitor, etc.) input
source as HDMI.
3. Check the PC BIOS conguration about the video
output setting.
4. Connect your computer to the HDMI Display
DIRECTLY to check if the video signal gets
through.

Manual

View the manual for the Planet IHD-210PT here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Planet IHD-210PT or do you need help? Ask your question here

Need help?

Do you have a question about the Planet and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Planet IHD-210PT specifications

Below you will find the product specifications and the manual specifications of the Planet IHD-210PT.

General
BrandPlanet
ModelIHD-210PT | IHD-210PT
ProductAV extender
EAN4711605282505
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Features
TypeAV transmitter
Maximum resolution1920 x 1080 pixels
Cable types supportedCat5e, Cat6
Maximum transfer distance100 m
Supported video modes480i, 480p, 720p, 1080i, 1080p
Supported graphics resolutions640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Video compression formatsH.264, MPEG1
LED indicatorsYes
HDCPYes
Networking standardsIEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Product colorBlack
CertificationFCC, CE
Ports & interfaces
Number of HDMI outputs1
HDMI version1.4a
Serial interface typeRS-232
RJ-45 input ports1
Operational conditions
Operating temperature (T-T)0 - 55 °C
Storage temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)5 - 90 %
Storage relative humidity (H-H)5 - 90 %
Power
Operating voltage5 V
Power consumption (typical)7 W
Current2 A
Power over Ethernet (PoE)Yes
Weight & dimensions
Dimensions (WxDxH)130 x 82 x 30.25 mm
Weight290 g
Packaging content
Cables includedIR
Quick start guideYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Planet IHD-210PT below.

What is the weight of the Planet IHD-210PT?

The Planet IHD-210PT has a weight of 290 g.

What certifications does the Planet IHD-210PT have?

The Planet IHD-210PT has the following certifications: FCC, CE.

Is the manual of the Planet IHD-210PT available in English?

Yes, the manual of the Planet IHD-210PT is available in English .

Is your question not listed? Ask your question here

No results