View the manual for the Pioneer XW-NAS3 here, for free. This manual comes under the category cradles & docking stations and has been rated by 3 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer XW-NAS3 or do you need help? Ask your question here





| Brand | Pioneer |
| Model | XW-NAS3 | XW-NAS3 |
| Product | cradle / docking station |
| EAN | 4977729972283 |
| Language | English |
| Filetype | User manual (PDF) |
| Audio output channels | 2.1 channels |
| RMS rated power | 30 W |
| Frequency range | 50 - 20000 Hz |
| Impedance | 8 Ω |
| Product color | White |
| Compatible products | iPod |
| Dimensions (WxDxH) | 420 x 210 x 148 mm |
| I/O ports | 1 x Component Video out, \r\n1 x Composite Video out, \r\n1 x RCA Audio in, \r\n1 x Bluetooth adapter |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Battery type | CR2025 |
| Number of batteries supported | 1 |
| Battery technology | Lithium-Ion (Li-Ion) |
| Power consumption (typical) | 30 W |
| Power consumption (standby) | 0.5 W |
| Built-in charger | Yes |
| Weight | 5000 g |
| Width | 420 mm |
| Depth | 210 mm |
| Height | 148 mm |
| Headphone connectivity | - |
| Bluetooth | No |
| Composite video out | 1 |
| Component video (YPbPr/YCbCr) out | 1 |
| FM radio | - |
| Apple docking compatibility | iPhone, iPod |
| Equalizer | - |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer XW-NAS3 below.
The Pioneer XW-NAS3 has a weight of 5000 g.
The Pioneer XW-NAS3 has a height of 148 mm.
The Pioneer XW-NAS3 has a width of 420 mm.
The Pioneer XW-NAS3 has a depth of 210 mm.
Yes, the Pioneer XW-NAS3 has a built-in charger for both iPhone and iPod. This means that users can conveniently charge their Apple devices while they are docked on the cradle.
The Pioneer XW-NAS3 has 2.1 channels of audio output. This means that it provides a stereo sound experience along with a dedicated subwoofer channel, offering users enhanced audio quality and depth.
The power consumption of the Pioneer XW-NAS3 in standby mode is 0.5 W. This low power consumption ensures energy efficiency and helps users save electricity when the cradle is not in use.
No, the Pioneer XW-NAS3 does not have built-in Bluetooth. This means that users cannot directly connect their Bluetooth-enabled devices to the cradle wirelessly. However, they can still connect their devices via other available I/O ports.
The Pioneer XW-NAS3 supports a single CR2025 battery. However, it is important to note that this battery is not for powering the cradle itself, but rather for specific functions or settings, such as the built-in clock or memory backup.
If your iPod is not playing through the Pioneer XW-NAS3 cradle / docking station, you can troubleshoot the issue by following these steps: 1. Check the connection: Ensure that your iPod is securely connected to the docking station. Make sure the docking connector is properly inserted into the iPod's dock connector port. 2. Verify the volume: Check the volume level on both the iPod and the docking station. Increase the volume to an audible level and make sure it is not muted. 3. Confirm compatibility: Ensure that your iPod model is compatible with the Pioneer XW-NAS3 cradle / docking station. Refer to the product manual or specifications to verify compatibility. 4. Update iPod software: Check if your iPod has the latest software version installed. Connect your iPod to a computer and use iTunes to check for any available software updates. Follow the instructions provided by Apple to update your iPod's software. 5. Restart the iPod: Sometimes, restarting the iPod can resolve playback issues. Disconnect the iPod from the docking station, turn it off, and then turn it back on again. Reconnect the iPod to the docking station and try playing music again. If the issue persists after following these troubleshooting steps, you may need to consult the product manual or contact Pioneer customer support for further assistance.
If your iPod is not recognized when connected to the Pioneer XW-NAS3 docking station, you can try the following troubleshooting steps: 1. Check the connection: Ensure that the iPod is securely connected to the docking station. Make sure the docking connector is properly inserted into the iPod's dock connector port. 2. Reconnect the iPod: If the iPod is not recognized, disconnect it from the docking station and reconnect it. Ensure that the connection is firm and secure. 3. Reset the iPod: If the issue persists, try resetting your iPod. Refer to the iPod's user manual or the manufacturer's website for instructions on how to reset your specific iPod model. 4. Update the iPod software: Check if your iPod has the latest software version installed. Connect your iPod to a computer and use iTunes to check for any available software updates. Follow the instructions provided by Apple to update your iPod's software. 5. Try a different iPod: If possible, try connecting a different iPod to the docking station to see if it is recognized. This will help determine if the issue is specific to your iPod or the docking station. If the problem continues after following these steps, you may need to contact Pioneer customer support for further assistance.
Certain functions, such as the equalizer, are not controllable through the Pioneer XW-NAS3 docking station due to the design and compatibility limitations. Here's why: 1. Hardware limitations: The Pioneer XW-NAS3 docking station may not have the necessary hardware components or circuitry to support advanced functions like equalizer control. The focus of the docking station may be on providing high-quality audio playback rather than extensive audio customization. 2. Software compatibility: The docking station's software may not be designed to interact with or control certain functions of the connected iPod. The equalizer settings and controls may be specific to the iPod itself and can only be accessed through the iPod's interface. 3. iPod limitations: Some iPod models have their own built-in equalizer settings that can only be adjusted through the iPod's settings menu. The docking station may not have the capability to override or modify these settings. 4. Simplified operation: The Pioneer XW-NAS3 docking station may prioritize ease of use and simplicity, offering basic playback controls without the need for extensive customization options. This approach allows for a more straightforward and user-friendly experience. It's important to note that these limitations are specific to the Pioneer XW-NAS3 docking station and may vary for other models or brands.
To troubleshoot if your iPod is not charging when connected to the Pioneer XW-NAS3 docking station, you can follow these steps: 1. Check the connection: Ensure that the iPod is properly connected to the docking station. Make sure the docking connector is securely inserted into the iPod's dock connector port. 2. Verify the power source: Ensure that the docking station is connected to a power source and turned on. Check if the power indicator on the docking station is illuminated. 3. Use the correct adapter: Make sure you are using the correct adapter for your iPod model. Refer to the iPod's user manual or the manufacturer's website to determine the compatible adapter. 4. Reset the iPod: If the iPod is not charging, try resetting it. Refer to the iPod's user manual or the manufacturer's website for instructions on how to reset your specific iPod model. 5. Update the iPod software: Check if your iPod has the latest software version installed. Connect your iPod to a computer and use iTunes to check for any available software updates. Follow the instructions provided by Apple to update your iPod's software. If the issue persists after following these steps, you may need to contact Pioneer customer support for further assistance.
To troubleshoot if the backlight function is not working on your iPod when connected to the Pioneer XW-NAS3 docking station, you can try the following steps: 1. Check the iPod settings: Ensure that the backlight settings on your iPod are properly configured. Go to the iPod's settings menu and adjust the backlight settings to your preference. Make sure the backlight is not set to the lowest brightness level or turned off completely. 2. Verify the docking station connection: Ensure that the iPod is securely connected to the docking station. Check if the docking connector is properly inserted into the iPod's dock connector port. A loose or faulty connection may affect the backlight function. 3. Restart the iPod: Sometimes, restarting the iPod can resolve software-related issues. Disconnect the iPod from the docking station, turn it off, and then turn it back on again. Reconnect the iPod to the docking station and check if the backlight function is working. 4. Update the iPod software: Check if your iPod has the latest software version installed. Connect your iPod to a computer and use iTunes to check for any available software updates. Follow the instructions provided by Apple to update your iPod's software. If the issue persists after following these steps, you may need to contact Pioneer customer support for further assistance.
To troubleshoot if the Pioneer XW-NAS3 docking station does not turn on or go into standby mode, you can follow these steps: 1. Check the power connection: Ensure that the power plug is securely inserted into the outlet. If the power does not turn on, disconnect the power plug from the outlet and insert it again. 2. External effects: If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert it again to return to normal operating conditions. 3. Automatic power-off: If the power shuts off automatically, take the unit to your nearest Pioneer authorized service center or dealer for servicing. 4. Standby mode: When input is set to iPod, if no iPod is connected for one hour or more, the unit's power automatically turns off. Ensure that an iPod is connected to keep the unit in normal operating mode. If the issue persists after following these troubleshooting steps, it is recommended to seek assistance from a Pioneer authorized service center or dealer for further repair work.
If your device is not connecting to the Pioneer XW-NAS3 docking station, you can try the following troubleshooting steps: 1. Check the connection: Ensure that the device is properly connected to the docking station. Make sure the cables are securely plugged into both the device and the docking station. 2. Verify compatibility: Ensure that your device is compatible with the Pioneer XW-NAS3 docking station. Check the user manual or product specifications to confirm compatibility. 3. Restart the devices: Try restarting both your device and the docking station. Turn off both devices, wait for a few seconds, and then turn them back on. 4. Update firmware: Check if there are any firmware updates available for the Pioneer XW-NAS3 docking station. Updating the firmware can sometimes resolve connectivity issues. 5. Reset the docking station: If the above steps do not work, try resetting the docking station to its factory settings. Refer to the user manual for instructions on how to perform a reset. If the issue persists after following these troubleshooting steps, it is recommended to contact Pioneer customer support for further assistance.
If the playback controls on the Pioneer XW-NAS3 docking station are not responding, you can try the following troubleshooting steps: 1. Check the connection: Ensure that the device you are using (such as an iPod) is properly connected to the docking station. Make sure the connection is secure and there are no loose cables. 2. Restart the device: Try restarting the device that you are using for playback. Turn it off, wait for a few seconds, and then turn it back on. This can help refresh the connection and resolve any temporary issues. 3. Check for compatibility: Ensure that the device you are using is compatible with the Pioneer XW-NAS3 docking station. Refer to the device's user manual or specifications to confirm compatibility. 4. Update firmware: Check if there are any firmware updates available for the Pioneer XW-NAS3 docking station. Updating the firmware can sometimes resolve issues with the playback controls. 5. Reset the docking station: If the above steps do not work, try resetting the docking station to its factory settings. Refer to the user manual for instructions on how to perform a reset. If the issue persists after following these troubleshooting steps, it is recommended to contact Pioneer customer support for further assistance.
To troubleshoot if you are unable to connect your device to the Pioneer XW-NAS3 docking station using Bluetooth, you can follow these steps: 1. Ensure compatibility: Check if your device is compatible with the Pioneer XW-NAS3 docking station for Bluetooth connectivity. Refer to the device's user manual or specifications to confirm compatibility. 2. Check Bluetooth settings: Make sure that Bluetooth is enabled on both your device and the docking station. On your device, go to the Bluetooth settings and ensure it is turned on. On the docking station, check if the Bluetooth indicator is lit or blinking. 3. Pairing process: Perform the pairing process between your device and the docking station. Put the docking station in pairing mode, usually by pressing a dedicated button or following specific instructions. On your device, search for available Bluetooth devices and select the Pioneer XW-NAS3 from the list. 4. Check distance and interference: Ensure that your device is within the Bluetooth range of the docking station, typically around 10 meters. Avoid any physical obstructions or interference from other electronic devices that may disrupt the Bluetooth signal. 5. Update firmware: Check if there are any firmware updates available for the Pioneer XW-NAS3 docking station. Updating the firmware can sometimes resolve Bluetooth connectivity issues. If the issue persists after following these troubleshooting steps, it is recommended to contact Pioneer customer support for further assistance.
To troubleshoot common issues with the Pioneer XW-NAS3 docking station, you can follow these troubleshooting steps: 1. Power-related issues: - Check the power connection and ensure the power plug is securely inserted into the outlet. - If the power does not turn on, disconnect the power plug from the outlet and insert it again. - If the power shuts off automatically, take the unit to a Pioneer authorized service center or dealer for servicing. 2. Sound-related issues: - Make sure the component is connected correctly, referring to the instructions for connecting auxiliary components. - If no sound is output when a function is selected, check the connection and ensure it is secure. 3. Remote control issues: - Replace the battery in the remote control if it is not functioning properly. - Operate the remote control within 7 meters and within 30° of the remote sensor on the front panel. - Remove any obstacles or operate the remote control from a different position. - Avoid exposing the remote sensor on the front panel to direct light. 4. Bluetooth connectivity issues: - Check for any objects emitting electromagnetic waves (such as a microwave oven or wireless LAN device) near the unit and move the unit away from them. - Ensure that the Bluetooth device is within a distance of about 10 meters from the unit and there are no obstructions between them. - Verify that the Bluetooth adapter and adapter port of the unit are correctly connected. - Check the Bluetooth device's communication mode and pairing settings, and reset the pairing if necessary. - Use a Bluetooth device that supports A2DP and AVRCP profiles for proper functionality. If the troubleshooting steps above do not resolve the issues, it is recommended to contact a Pioneer authorized service center or dealer for further assistance.
To troubleshoot if the Pioneer XW-NAS3 docking station does not turn on or go into standby mode, you can follow these steps: 1. Check the power connection: Ensure that the power plug is securely inserted into the outlet. If the power does not turn on, disconnect the power plug from the outlet and insert it again. 2. External effects: If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert it again to return to normal operating conditions. 3. Automatic power-off: If the power shuts off automatically, take the unit to your nearest Pioneer authorized service center or dealer for servicing. 4. Standby mode: When input is set to iPod, if no iPod is connected for one hour or more, the unit's power automatically turns off. Ensure that an iPod is connected to keep the unit in normal operating mode. If the issue persists after following these troubleshooting steps, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance.
If your device is not connecting to the Pioneer XW-NAS3 docking station, you can try the following troubleshooting steps: 1. Check the connection: Ensure that the device is properly connected to the docking station. Make sure the cables are securely plugged into both the device and the docking station. 2. Restart the device: Sometimes, a simple restart can resolve connectivity issues. Turn off the device and then turn it back on again. 3. Update the device software: Check if there are any software updates available for your device. Updating the software can often fix compatibility issues and improve connectivity. 4. Reset the docking station: If the issue persists, try resetting the docking station. Refer to the manual for instructions on how to reset the Pioneer XW-NAS3 docking station. 5. Check for interference: Ensure that there are no objects or devices causing interference between your device and the docking station. Move any potential sources of interference away from the docking station. If the problem still persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.
To troubleshoot if the playback controls on the Pioneer XW-NAS3 docking station are not working properly, you can follow these steps: 1. Check the remote control: Ensure that the batteries in the remote control are not depleted. Replace the batteries if necessary. 2. Clean the remote control: Remove any dust or debris from the remote control buttons. Use a soft, dry cloth to clean the surface of the remote control. 3. Check the connection: Make sure that the docking station is properly connected to the device. Ensure that the cables are securely plugged into both the device and the docking station. 4. Restart the device: Turn off the device and then turn it back on again. This can help reset any temporary issues with the playback controls. 5. Update the device software: Check if there are any software updates available for your device. Updating the software can often fix issues with the playback controls. If the problem still persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.
To troubleshoot if your device is not charging when connected to the Pioneer XW-NAS3 docking station, you can follow these steps: 1. Check the connection: Ensure that the device is securely connected to the docking station. Make sure the cables are properly plugged into both the device and the docking station. 2. Clean the charging ports: Inspect the charging ports on both the device and the docking station for any dirt, debris, or corrosion. Use a soft, dry cloth to gently clean the ports. 3. Try a different cable or adapter: If possible, try using a different charging cable or adapter to rule out any issues with the current cable or adapter. 4. Restart the device: Sometimes, a simple restart can resolve charging issues. Turn off the device and then turn it back on again. 5. Check for software updates: Ensure that your device's software is up to date. Check for any available software updates and install them if necessary, as updates can sometimes fix charging-related issues. If the problem persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.
To troubleshoot audio or connectivity issues with the Pioneer XW-NAS3 docking station, you can follow these steps: 1. Check the connection: Ensure that the device is properly connected to the docking station. Make sure the cables are securely plugged into both the device and the docking station. 2. Clean the connectors: Inspect the connectors on both the device and the docking station for any dirt, dust, or debris. Use a soft, dry cloth to gently clean the connectors. 3. Restart the device: Turn off the device and then turn it back on again. This can help reset any temporary issues with the audio or connectivity. 4. Check the volume settings: Make sure that the volume on both the device and the docking station is set to an audible level. Adjust the volume as needed. 5. Update the device software: Check if there are any software updates available for your device. Updating the software can often fix audio or connectivity issues. If the problem still persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.
To troubleshoot if the Pioneer XW-NAS3 does not turn on when you press the STANDBY/ON button, follow these steps: 1. Check the power connection: Ensure that the power plug is securely inserted into the outlet. If it is already connected, try disconnecting it and then reconnecting it to ensure a proper connection. 2. Power reset: If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert it again. This can help reset the device and resolve any temporary issues. 3. Automatic power-off: If the power shuts off automatically, it may be due to certain conditions. For example, when the input is set to iPod, if no iPod is connected for one hour or more, the unit's power automatically turns off. Make sure to connect the appropriate device to prevent automatic power-off. 4. Seek professional assistance: If the troubleshooting steps mentioned above do not resolve the issue, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance and repair work. Please note that these troubleshooting steps are specific to the Pioneer XW-NAS3 cradle/docking station and may vary for other models or brands.
If your device is not connecting to the Pioneer XW-NAS3 cradle/docking station, you can troubleshoot the issue by following these steps: 1. Check the connection: Ensure that the device is properly connected to the cradle/docking station. Make sure the cables are securely plugged into both the device and the cradle/docking station. 2. Verify compatibility: Ensure that your device is compatible with the Pioneer XW-NAS3 cradle/docking station. Check the device's user manual or specifications to confirm compatibility with the cradle/docking station. 3. Restart the device: Try restarting both your device and the cradle/docking station. Power off your device, disconnect it from the cradle/docking station, and then power it back on. Similarly, turn off the cradle/docking station, unplug it from the power source, and then plug it back in. 4. Update firmware: Check if there are any firmware updates available for the Pioneer XW-NAS3 cradle/docking station. Visit the Pioneer website or refer to the manual for instructions on how to update the firmware. 5. Contact support: If the issue persists after following the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Please note that these troubleshooting steps are specific to the Pioneer XW-NAS3 cradle/docking station and may vary for other models or brands.
If the playback controls on the Pioneer XW-NAS3 cradle/docking station are not responding, you can try the following troubleshooting steps: 1. Check the connection: Ensure that the device you are using to control the playback (e.g., iPod) is securely connected to the cradle/docking station. Make sure the connection is not loose or damaged. 2. Reset the device: If the playback controls are still not responding, try resetting the device you are using to control the playback. Refer to the device's user manual for instructions on how to perform a reset. 3. Update firmware: Check if there are any firmware updates available for the Pioneer XW-NAS3 cradle/docking station. Updating the firmware can sometimes resolve issues with the playback controls. Visit the Pioneer website for instructions on how to update the firmware. 4. Try a different device: If possible, try using a different device to control the playback. This can help determine if the issue is specific to the device or the cradle/docking station. 5. Contact support: If the playback controls are still not responding after trying the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Please note that these troubleshooting steps are specific to the Pioneer XW-NAS3 cradle/docking station and may vary for other models or brands.
If your connected device is not charging when connected to the Pioneer XW-NAS3 cradle/docking station, you can try the following troubleshooting steps: 1. Check the power connection: Ensure that the cradle/docking station is properly connected to a power source. Make sure the power plug is securely inserted into the outlet. 2. Verify compatibility: Ensure that your device is compatible with the Pioneer XW-NAS3 cradle/docking station. Check the device's user manual or specifications to confirm compatibility. 3. Clean the charging port: Sometimes, dust or debris can accumulate in the charging port of your device or the cradle/docking station, preventing proper charging. Use a soft, dry cloth to clean the charging port of both the device and the cradle/docking station. 4. Restart the devices: Try restarting both your device and the cradle/docking station. Power off your device, disconnect it from the cradle/docking station, and then power it back on. Similarly, turn off the cradle/docking station, unplug it from the power source, and then plug it back in. 5. Contact support: If the issue persists after trying the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Please note that these troubleshooting steps are specific to the Pioneer XW-NAS3 cradle/docking station and may vary for other models or brands.
To resolve the problem of no sound output from the Pioneer XW-NAS3 cradle/docking station, you can try the following troubleshooting steps: 1. Check the connection: Ensure that the audio device you are using is properly connected to the cradle/docking station. Make sure the cables are securely plugged into both the audio device and the cradle/docking station. 2. Adjust the volume: Check the volume settings on both the cradle/docking station and the connected audio device. Increase the volume to an audible level and make sure it is not muted. 3. Verify the input source: Confirm that the cradle/docking station is set to the correct input source for the connected audio device. Use the input/source selection buttons on the cradle/docking station to switch to the appropriate input source. 4. Check the audio device settings: Ensure that the audio device is not set to a low volume or muted. Adjust the volume settings on the audio device itself. 5. Test with another audio device: If possible, try connecting a different audio device to the cradle/docking station to see if the issue persists. This can help determine if the problem is with the cradle/docking station or the original audio device. If the issue persists after trying these troubleshooting steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Please note that these troubleshooting steps are specific to the Pioneer XW-NAS3 cradle/docking station and may vary for other models or brands.
Yes, the manual of the Pioneer XW-NAS3 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0