Pioneer X-HM82 manual

Pioneer X-HM82
8 · 1
PDF manual
 · 63 pages
English
manualPioneer X-HM82
Operating Instructions
Discover the benefits of registering your product online at

http://www.pioneer.co.uk

(or http://www.pioneer.eu).
NETWORK CD RECEIVER

XC-HM82-S/-K

X-HM82-S/-K

X-HM72-S/-K

XC-HM82D-K

X-HM82D-K

X-HM72D-S/-K

NETWORK CD RECEIVER SYSTEM

View the manual for the Pioneer X-HM82 here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Pioneer X-HM82 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelX-HM82
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer X-HM82 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect the Pioneer X-HM82 hi-fi system to my network?

To connect the Pioneer X-HM82 hi-fi system to your network, follow these steps: 1. Press the STANDBY/ON button to turn on the receiver. 2. Connect a NAS (network attached storage) that supports DLNA or a computer with Windows Media Player 12 installed to the same router as the receiver. 3. Use a LAN cable to connect the NAS or computer to the LAN port on the receiver. Make sure the cable is securely plugged in. 4. On your iPhone or computer, open the Control Center or Windows Media Player and select AirPlay. 5. Look for the name of the receiver in the list of available devices and select it. The name may vary depending on the product model (XC-HM72, XC-HM82, XC-HM72D, or XC-HM82D). 6. If prompted, enter the AirPlay password. You can set an AirPlay password through the Wireless Accessory Configuration, Network Setting screen, or Web Control screen. 7. Once connected, you can play music from your NAS or computer through the Pioneer X-HM82 hi-fi system. Please note that these instructions are based on the Pioneer X-HM82 hi-fi system manual and may vary slightly depending on your specific setup.

Why is the Pioneer X-HM82 hi-fi system not turning on?

If the Pioneer X-HM82 hi-fi system is not turning on, you can try the following troubleshooting steps: 1. Check the power connection: Ensure that the power cord is securely plugged into the power outlet and the receiver. If the power cord is loose, plug it in firmly. 2. Power reset: If the receiver is unresponsive, try performing a power reset. Press the STANDBY/ON button to turn off the receiver, unplug the power cord from the outlet, wait for a few minutes, and then plug it back in. Press the STANDBY/ON button again to turn on the receiver. 3. Check for power failure: Verify if there has been a power failure in your area. If there was a power outage, reset the clock on the receiver. 4. Speaker wire connection: Ensure that the speaker wires are properly connected to the receiver and the speakers. Check for any loose or disconnected wires. 5. Contact authorized service center: If none of the above steps resolve the issue, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance and possible repair. Please note that these troubleshooting steps are based on the Pioneer X-HM82 hi-fi system manual and may vary depending on the specific situation.

How do I detach and replace the front grille of the speaker system?

To detach and replace the front grille of the speaker system on the Pioneer X-HM82 hi-fi system, follow these steps: 1. Locate the front grille: Identify the front grille on the speaker system. It is the fabric cover that protects the speaker drivers. 2. Detach the front grille: Gently grip the edges of the front grille and carefully pull it away from the speaker system. Use even pressure to avoid damaging the grille or the speaker drivers. 3. Clean or replace the front grille: If you want to clean the front grille, use a soft brush or vacuum cleaner to remove any dust or debris. If you need to replace the front grille, contact the authorized Pioneer service center or dealer to obtain a replacement grille. 4. Align and attach the front grille: Align the edges of the replacement grille with the speaker system and carefully press it into place. Ensure that the grille is securely attached and sits flush with the speaker system. 5. Test the speaker system: After attaching the front grille, test the speaker system to ensure that it is functioning properly. Play some audio and check for any abnormalities in sound quality. Remember to handle the front grille with care to avoid any damage, and always refer to the Pioneer X-HM82 hi-fi system manual for specific instructions and illustrations if available.

What should I do if any accessories are missing from the box of the Pioneer X-HM82 hi-fi system?

If any accessories are missing from the box of the Pioneer X-HM82 hi-fi system, follow these steps: 1. Check the contents: Carefully inspect the contents of the box to ensure that you have not overlooked any accessories. Double-check all compartments and packaging materials. 2. Contact the seller: If you have confirmed that accessories are indeed missing, contact the seller or retailer from whom you purchased the Pioneer X-HM82 hi-fi system. Provide them with a detailed list of the missing accessories. 3. Provide proof of purchase: Be prepared to provide proof of purchase, such as a receipt or order confirmation, to the seller or retailer. This will help facilitate the resolution process. 4. Follow the seller's instructions: Follow the instructions provided by the seller or retailer regarding the missing accessories. They may offer to send you the missing items or provide a refund or replacement. 5. Contact Pioneer support: If the seller or retailer is unable to assist you, contact Pioneer customer support directly. Provide them with the necessary details, including the model number (X-HM82) and the missing accessories. By following these steps, you can address the issue of missing accessories for your Pioneer X-HM82 hi-fi system.

Why is the remote control not working with the Pioneer X-HM82 hi-fi system?

If the remote control is not working with the Pioneer X-HM82 hi-fi system, you can try the following troubleshooting steps: 1. Check the batteries: Ensure that the batteries in the remote control are inserted correctly and have sufficient power. Replace the batteries if necessary. 2. Check the remote control range: Make sure that there are no obstacles between the remote control and the remote sensor on the receiver. Avoid strong sunlight or fluorescent light shining on the receiver's remote sensor, as it may interfere with the remote control signal. 3. Avoid interference: Keep in mind that remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to the Pioneer X-HM82 hi-fi system. 4. Reset the remote control: If the remote control is still not working, try resetting it. Remove the batteries from the remote control, wait for a few seconds, and then reinsert the batteries. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Pioneer customer support for further assistance and possible replacement of the remote control. By following these steps, you can troubleshoot and address the issue of the remote control not working with the Pioneer X-HM82 hi-fi system.

How do I connect the Pioneer X-HM82 hi-fi system to my network?

To connect the Pioneer X-HM82 hi-fi system to your network, follow these steps: 1. Turn on the power to the receiver by pressing the STANDBY/ON button. 2. Connect a NAS (network attached storage) that supports DLNA or a computer with Windows Media Player 12 installed to the same router as the receiver. 3. Use a LAN cable to connect the NAS or computer to the LAN port on the receiver. Make sure the cable is securely plugged in. 4. Ensure that your wireless LAN router is connected to the internet and functioning properly. 5. On your iPhone or computer, open the Control Center or Windows Media Player 12. 6. Tap or select the AirPlay option. 7. Look for the name of the receiver in the list of available devices and select it. 8. Choose a track or music file from your iPhone or computer and start playing it. 9. The Pioneer X-HM82 hi-fi system will now play the selected music through the network connection. Note: If you have set an AirPlay password, you may be prompted to enter it before starting AirPlay. You can set an AirPlay password through the Wireless Accessory Configuration, Network Setting screen, or Web Control screen. Please ensure that your network and devices are properly configured for a seamless connection.

Why is the Pioneer X-HM82 hi-fi system not turning on?

If the Pioneer X-HM82 hi-fi system is not turning on, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the power cord is securely plugged into both the receiver and a working electrical outlet. If using a power strip or surge protector, make sure it is turned on and functioning properly. 2. Verify the power button: Press the STANDBY/ON button on the front panel or remote control to turn on the system. Ensure that the button is not stuck or damaged. 3. Check the power indicator: Look for the power indicator light on the front panel of the receiver. If it is not lit, there may be a power supply issue. In this case, try plugging the receiver into a different outlet or consult a qualified technician. 4. Reset the system: If the receiver is unresponsive, you can try resetting it. Locate the RESET button on the rear panel and press it using a pointed object, such as a paperclip. This will restore the system to its default settings. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. By following these steps, you can troubleshoot the issue of the Pioneer X-HM82 hi-fi system not turning on.

How do I detach the front grille of the speaker system?

To detach the front grille of the speaker system on the Pioneer X-HM82 hi-fi system, follow these steps: 1. Locate the speaker system: Identify the front speakers of the Pioneer X-HM82 hi-fi system. The front grille is attached to these speakers. 2. Gently grip the edges: Place your fingers on the edges of the front grille, near the corners of the speaker system. 3. Apply even pressure: Apply even pressure with your fingers and pull the front grille towards you. Be careful not to use excessive force to avoid damaging the grille or the speaker system. 4. Detach the front grille: As you pull the front grille towards you, it should start to come off from the speaker system. Continue pulling until the grille is completely detached. 5. Store the front grille: If desired, you can store the front grille in a safe place to prevent it from getting damaged or misplaced. By following these steps, you can easily detach the front grille of the speaker system on the Pioneer X-HM82 hi-fi system.

What should I do if any accessories are missing from the box of the Pioneer X-HM82 hi-fi system?

If any accessories are missing from the box of the Pioneer X-HM82 hi-fi system, you can take the following steps: 1. Check the contents: Carefully inspect the contents of the box to ensure that you have not overlooked any accessories. Double-check all compartments and packaging materials. 2. Contact the retailer: If you have confirmed that accessories are indeed missing, contact the retailer from whom you purchased the Pioneer X-HM82 hi-fi system. Provide them with the details of the missing accessories and request assistance. 3. Provide proof of purchase: Be prepared to provide proof of purchase, such as a receipt or order confirmation, to the retailer. This will help them verify your purchase and assist you accordingly. 4. Follow the retailer's instructions: The retailer may provide instructions on how to proceed. They may offer to replace the missing accessories or provide alternative solutions to resolve the issue. By following these steps and reaching out to the retailer, you can address the situation of missing accessories from the box of the Pioneer X-HM82 hi-fi system.

Why is the remote control not working properly with the Pioneer X-HM82 hi-fi system?

If the remote control is not working properly with the Pioneer X-HM82 hi-fi system, you can try the following steps to troubleshoot the issue: 1. Check the distance and angle: Make sure you are operating the remote control within a distance of 7 meters and within a 30-degree angle of the remote sensor on the front panel of the receiver. Avoid obstacles or direct sunlight that may interfere with the remote control signals. 2. Replace the batteries: Check if the batteries in the remote control are dead or low. Replace them with fresh batteries, ensuring they are inserted correctly according to the polarity markings. 3. Reset the remote control: If the remote control still malfunctions, try resetting it. Remove the batteries from the remote control and press any button on the remote control for at least 5 seconds. Then, reinsert the batteries and test the remote control again. 4. Check for interference: Ensure that there are no objects emitting electromagnetic waves in the 2.4 GHz band near the receiver, such as microwave ovens or wireless LAN devices. These objects can interfere with the remote control signals. Move the receiver away from such objects or stop using them. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. By following these steps, you can troubleshoot the issue of the remote control not working properly with the Pioneer X-HM82 hi-fi system.

Is the manual of the Pioneer X-HM82 available in English?

Yes, the manual of the Pioneer X-HM82 is available in English .

Is your question not listed? Ask your question here

No results