View the manual for the Pioneer X-HM32V here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer X-HM32V or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer X-HM32V below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
To troubleshoot disc playback issues with the Pioneer X-HM32V speaker, follow these steps: 1. Ensure that the power is turned on by pressing the 1 STANDBY/ON button. Make sure the selected input is displayed on the front panel. 2. Select the DVD/CD input by pressing the DVD/CD button on the remote control or repeatedly pressing the INPUT button on the main unit. Wait until you see the "NO DISC" message. 3. If there is already a disc on the disc tray, press the OPEN/CLOSE button to eject the disc. 4. Open the disc tray by pressing the OPEN/CLOSE button. 5. Place the disc on the disc tray with the label side facing up. 6. Close the disc tray by pressing the OPEN/CLOSE button. 7. Press the play button (!) to start playback. Note: Avoid placing two discs in one disc tray and do not play discs of special shapes (heart, octagon, etc.) as it may cause malfunctions. Also, make sure to place 8 cm discs in the middle of the disc tray. If you continue to experience issues with disc playback, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance.
If your iPod/iPhone/iPad is not connecting to the Pioneer X-HM32V speaker, you can try the following troubleshooting steps: 1. Check the alignment of the iPod/iPhone/iPad cable: Ensure that the cable is properly aligned along the groove on the back of the stand that comes with the unit. 2. Verify the placement of the iPad: If you are using an iPad, make sure to place it horizontally on the stand. 3. Connect the iPod/iPhone/iPad: Use the iPod/iPhone/iPad cable to connect your device to the unit. 4. Select the USB input source: Press the USB button on the remote control or repeatedly press the INPUT button on the main unit until "USB/iPod" is shown on the main display. 5. Start playback: Once the recognition is completed, the playback will begin automatically. You can control the playback using the available iPod/iPhone/iPad playback controls on the unit. If the issue persists, you can try the following additional troubleshooting steps: 1. Check device compatibility: Ensure that your iPod/iPhone/iPad model is supported by the Pioneer X-HM32V speaker. Refer to the manual supplied with your device for compatibility information. 2. Reconnect and reset: Disconnect the iPod/iPhone/iPad from the unit, reconnect it, and try resetting your device. Then, reconnect it to the unit again. If these steps do not resolve the issue, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance.
To disable the auto power off setting on the Pioneer X-HM32V speaker, follow these steps: 1. Long press the "#" button on the unit for 3 seconds. This will switch the auto power off setting ON/OFF. 2. The operation can be conducted using only the "#" button on the unit. There is no need to use the remote control for this setting. 3. By default, the auto power off setting is set to ON. When the auto power off is set to ON, "APD ON" will be displayed on the main display. 4. To disable the auto power off setting, long press the "#" button again for 3 seconds. This will switch the auto power off setting to OFF. When the auto power off is set to OFF, "APD OFF" will be displayed on the main display. Please note that these steps are specific to the Pioneer X-HM32V speaker and may vary for other models.
To reset all the settings of the Pioneer X-HM32V speaker to their default values, follow these steps: 1. Press the HOME MENU button on the unit. The HOME MENU screen will appear. 2. Use the navigation buttons (F, G, H, I) to select the "Initial Settings" option, then press the ENTER button. 3. On the Initial Settings screen, navigate to the "Restore Default Settings" option using the navigation buttons. 4. Press the ENTER button to select the "Restore Default Settings" option. 5. A confirmation message will appear asking if you want to restore the default settings. Use the navigation buttons to select "Yes" and press the ENTER button. 6. The settings of the Pioneer X-HM32V speaker will be reset to their default values. Please note that resetting the settings will restore all the settings to their factory defaults, including audio settings, video settings, and other personalized settings. Make sure to reconfigure any desired settings after the reset if necessary.
To properly dispose of old equipment and used batteries for the Pioneer X-HM32V speaker, follow these guidelines: 1. Collection and disposal: Do not mix used electrical and electronic products and batteries with general household waste. Take them to applicable collection points in accordance with your national legislation. This ensures proper treatment, recovery, and recycling of these items. 2. Contact local authorities: For more information about collection and recycling of old products and batteries, contact your local municipality, waste disposal service, or the point of sale where you purchased the items. They can provide guidance on the correct method of disposal. 3. European Union symbols: The symbols indicating the proper disposal of old equipment and batteries are valid in the European Union. Follow the guidelines provided by these symbols for disposal within the EU. 4. Outside the European Union: If you are outside the European Union, contact your local authorities or dealer to inquire about the correct method of disposal for old equipment and batteries. By following these guidelines, you contribute to saving valuable resources and preventing any potential negative effects on human health and the environment that may arise from improper waste handling.
Yes, the manual of the Pioneer X-HM32V is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0