View the manual for the Pioneer X-HM21-S here, for free. This manual comes under the category CD players and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Pioneer X-HM21-S or do you need help? Ask your question here



| RMS rated power | 30 W |
| Audio amplifier | Yes |
| Speaker type | 2-way |
| Number of speakers | 2 |
| Bass reflex | Yes |
| Speakers connectivity type | Clamp terminals |
| Karaoke | No |
| Cassette deck | No |
| Optical disc player | Yes |
| Number of optical discs | 1 discs |
| Product color | Black, Silver |
| Type | Home audio mini system |
| Disc loading type | Tray |
| Playback disc formats | CD audio |
| MP3 playback | Yes |
| Audio formats supported | MP3, WMA |
| Card reader integrated | No |
| LED indicators | Yes |
| Supported radio bands | AM, FM |
| Radio Data System (RDS) | Yes |
| Preset stations quantity | 45 |
| Display type | FLT |
| Apple docking compatibility | iPad, iPhone, iPod |
| Video recording | No |
| Antenna | Yes |
| Speaker width | 130 mm |
| Speaker depth | 228.5 mm |
| Speaker height | 211.5 mm |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Headphone outputs | 1 |
| Line-in | Yes |
| USB port | Yes |
| Equalizer | Yes |
| Equalizer bands quantity | 4 |
| Sleep timer | Yes |
| Integrated clock | Yes |
| Bass adjustment | Yes |
| Treble adjustment | Yes |
| Volume control | Digital |
| Power source | AC |
| Input frequency | 50 - 60 Hz |
| Input voltage | 220-240 V |
| Power consumption (typical) | 30 W |
| Power consumption (standby) | 0.5 W |
| Width | 215 mm |
| Depth | 315 mm |
| Height | 95 mm |
| Weight | 2000 g |
| Handheld remote control | Yes |
| Manual | Yes |
| Wi-Fi | No |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer X-HM21-S below.
The Pioneer X-HM21-S has a weight of 2000 g.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
The Pioneer X-HM21-S has a height of 95 mm.
The Pioneer X-HM21-S has a width of 215 mm.
The Pioneer X-HM21-S has a depth of 315 mm.
No, the Pioneer X-HM21-S does not have a cassette deck. This means that the CD-player does not support cassette tapes and can only play CDs and other digital audio formats.
Yes, the Pioneer X-HM21-S has an audio amplifier. This means that it is capable of amplifying audio signals from the CD-player and delivering them to the speakers, providing a better sound quality compared to models without an amplifier.
The Pioneer X-HM21-S has 2 speakers. This means that it can deliver stereo sound, providing a more immersive listening experience compared to single speaker systems.
Yes, the Pioneer X-HM21-S supports MP3 playback. This means that users can play their MP3 music files directly from CDs, offering a wide range of audio options.
The Pioneer X-HM21-S can save up to 45 preset stations. This means that users can easily switch between their favorite radio stations without the need for manual tuning, offering convenience and quick access to preferred broadcasts.
To load the batteries in the remote control of the Pioneer X-HM21-S CD-player, follow these steps: 1. Open the rear lid of the remote control. 2. Insert two AAA batteries into the remote control, making sure to match the polarity marks (+ and -) on the batteries with the corresponding marks inside the remote control. 3. Close the rear lid of the remote control. Please note the following precautions: - Be careful not to damage the springs on the battery terminals when inserting the batteries, as this can cause leakage or overheating. - Only use the specified AAA batteries and do not mix new and old batteries. - Make sure to insert the batteries in the correct direction, as indicated by the polarity marks. - Do not heat, disassemble, or dispose of batteries in flames or water. - If the remote control will not be used for a long period of time (1 month or more), remove the batteries to prevent leakage. - Follow the proper disposal guidelines for used batteries according to your country/area's regulations. By following these steps, you can easily load the batteries in the remote control of the Pioneer X-HM21-S CD-player.
To connect the speaker system to the Pioneer X-HM21-S CD-player, follow these steps: 1. Turn off the power and unplug the power cord from the power outlet before making any connections. 2. Locate the speaker terminals on the rear panel of the CD-player. 3. Push open the tabs on the speaker terminals. 4. Insert the exposed wire of the speaker cables into the corresponding terminals. - Connect the black wire to the (-) terminal. - Connect the red wire to the (+) terminal. Note: Ensure that the speaker cables are securely inserted into the terminals and do not come out easily. 5. Make sure that the speaker cable cores do not become exposed and make contact with other cable cores, as this may cause malfunction. 6. Do not allow the speaker cable core to come into contact with the receiver body, as it may damage the speakers and cause smoke and fire. 7. Repeat the above steps for connecting the other speaker to the remaining terminals. 8. Once the speaker system is connected, you can turn on the power and enjoy your music. Please note the following precautions: - Only connect the supplied speakers to this system. - Do not attach the speakers to the wall or ceiling, as they may fall off and cause injury. - If the speaker system is installed extremely close to a television set, color distortion may occur. In such cases, move the speaker system away from the television set. - Follow the proper disposal guidelines for used batteries according to your country/area's regulations. By following these steps, you can successfully connect the speaker system to the Pioneer X-HM21-S CD-player.
To set the clock on the Pioneer X-HM21-S CD-player, follow these steps: 1. Turn on the power of the CD-player by pressing the STANDBY/ON button. 2. Press the CLOCK/TIMER button on the remote control. The main display will show "CLOCK". 3. Press the ENTER button. 4. Use the /g72/g17/g73 buttons to set the day, then press ENTER. 5. Use the /g72/g17/g73 buttons to set the hour, then press ENTER. 6. Use the /g72/g17/g73 buttons to set the minute, then press ENTER to confirm. 7. Press the ENTER button again. 8. To confirm the time display, press the CLOCK/TIMER button. The time display will appear for about 10 seconds. 9. If you need to readjust the clock, repeat the steps from the beginning. Please note that if the power supply is restored after the unit is plugged in again or after a power failure, you will need to reset the clock by following these steps. By following these steps, you can easily set the clock on the Pioneer X-HM21-S CD-player.
To play MP3/WMA files on the Pioneer X-HM21-S CD-player, follow these steps: 1. Press the STANDBY/ON button to turn on the power of the CD-player. 2. Press the CD button on the remote control or repeatedly press the INPUT button on the main unit to select the CD input. 3. Press the OPEN/CLOSE button to open the disc tray. 4. Place the MP3/WMA disc on the disc tray with the label side up. 5. Press the OPEN/CLOSE button again to close the disc tray. 6. Press the PLAY button to start playback. 7. The CD-player will automatically read the MP3/WMA files on the disc and start playing them. 8. Use the TRACK UP/DOWN buttons to navigate between tracks. 9. To pause playback, press the PAUSE button. Press it again to resume playback. 10. To stop playback, press the STOP button. Please note that the Pioneer X-HM21-S CD-player supports MP3 files with sampling rates from 8 kHz to 48 kHz and bit rates from 64 kbps to 384 kbps. It also supports WMA files with sampling rates of 32 kHz, 44.1 kHz, and 48 kHz, and bit rates from 64 kbps to 320 kbps. By following these steps, you can easily play MP3/WMA files on the Pioneer X-HM21-S CD-player.
To program a specific sequence of tracks to play on the Pioneer X-HM21-S CD-player, follow these steps: 1. Press the STANDBY/ON button to turn on the power of the CD-player. 2. Press the CD button on the remote control or repeatedly press the INPUT button on the main unit to select the CD input. 3. Press the PROGRAM button on the remote control. The display will show "PROGRAM". 4. Use the numeric buttons on the remote control to enter the desired track numbers in the order you want them to be played. - For example, to program track 3, followed by track 7, followed by track 2, enter "3 7 2". 5. Press the ENTER button to confirm the programmed sequence. 6. Press the PLAY button to start playback of the programmed tracks. 7. The CD-player will play the tracks in the programmed sequence. 8. To clear the programmed sequence, press the STOP button twice. Please note that the Pioneer X-HM21-S CD-player can store up to 20 tracks in the programmed sequence. If you want to add more tracks or change the sequence, you can repeat the above steps. By following these steps, you can easily program a specific sequence of tracks to play on the Pioneer X-HM21-S CD-player.
Yes, the manual of the Pioneer X-HM21-S is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0