View the manual for the Pioneer X-CM42BT here, for free. This manual comes under the category cradles & docking stations and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Pioneer X-CM42BT or do you need help? Ask your question here




| Brand | Pioneer |
| Model | X-CM42BT | X-CM42BT-R |
| Product | cradle / docking station |
| EAN | 4988028248610 |
| Language | English |
| Filetype | User manual (PDF) |
| Audio output channels | 2.0 channels |
| RMS rated power | 30 W |
| Impedance | 8 Ω |
| Speaker type | 2-way |
| Headphone connectivity | 3.5 mm |
| Bluetooth | Yes |
| USB 2.0 ports quantity | 1 |
| Headphone outputs | 1 |
| Lightning connector | Yes |
| Apple Lightning docking connector | Yes |
| USB connector type | USB Type-A |
| Playback disc types | CD-R, CD-RW |
| Apple docking compatibility | iPhone 5, iPhone 5c, iPhone 5s, iPod Nano 7, iPod Touch 5 |
| Bass reflex | Yes |
| Equalizer | Yes |
| Equalizer modes | Flat |
| FM radio | Yes |
| Preset stations quantity | 45 |
| Supported radio bands | AM, FM |
| Display | FL |
| Backlight color | White |
| Product color | Red |
| Woofer diameter | 90 mm |
| Tweeter diameter | 50 mm |
| Tweeter | Yes |
| Power source type | AC |
| Built-in charger | Yes |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 37 W |
| Power consumption (standby) | 0.5 W |
| Handheld remote control | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer X-CM42BT below.
The Pioneer X-CM42BT has a USB Type-A connection.
Yes, the Pioneer X-CM42BT has Bluetooth connectivity. This allows users to easily connect their devices wirelessly and stream music.
The Pioneer X-CM42BT has 1 USB 2.0 port. This allows users to connect their devices and play music directly from a USB source.
Yes, the Pioneer X-CM42BT is compatible with iPhone 5, iPhone 5c, iPhone 5s, iPod Nano 7, and iPod Touch 5. This allows Apple users to directly dock their devices and play music.
Yes, the Pioneer X-CM42BT has an equalizer with a Flat mode. Users can customize the sound settings to suit their preferences.
The Pioneer X-CM42BT allows users to save up to 45 FM radio presets. This provides a wide range of options for users to easily access their favorite stations.
If the Pioneer X-CM42BT cradle/docking station is not producing any sound, you can troubleshoot the issue by following these steps: 1. Check the power connection: Ensure that the cradle/docking station is properly plugged into a power outlet and turned on. Make sure the power cord is securely connected to both the cradle/docking station and the power source. 2. Verify the volume level: Check the volume level on the cradle/docking station and make sure it is not set to the minimum or muted. Increase the volume gradually to see if the sound starts playing. 3. Check the input source: Ensure that the correct input source is selected on the cradle/docking station. For example, if you are trying to play music from an iPod/iPhone/iPad, make sure the cradle/docking station is set to the iPod/iPhone/iPad input. 4. Test with different audio sources: Connect different audio devices to the cradle/docking station, such as a different iPod/iPhone/iPad or a different audio player, to see if the issue is specific to a particular device. 5. Reset the cradle/docking station: If none of the above steps resolve the issue, try resetting the cradle/docking station to its factory settings. Refer to the manual for instructions on how to perform a reset. If the problem persists after following these troubleshooting steps, it is recommended to contact a Pioneer authorized service center or your dealer for further assistance.
If the front panel buttons of the Pioneer X-CM42BT cradle/docking station are not responding, you can try the following steps to troubleshoot the issue: 1. Check for any obstructions: Ensure that there are no objects or debris blocking the buttons on the front panel. Clean the surface of the buttons if necessary. 2. Verify the power status: Make sure that the cradle/docking station is powered on. Check if the power indicator light is illuminated on the front panel. 3. Check the remote control: Test if the buttons on the remote control are functioning properly. If the remote control works, it could indicate a potential issue with the front panel buttons themselves. 4. Restart the cradle/docking station: Try turning off the power to the cradle/docking station and then turning it back on. This can help reset any temporary glitches that may be affecting the button responsiveness. 5. Contact customer support: If the front panel buttons still do not respond after trying the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Remember to refer to the Pioneer X-CM42BT cradle/docking station when seeking support.
To troubleshoot if the Pioneer X-CM42BT cradle/docking station is not connecting to your Bluetooth device, you can follow these steps: 1. Check the Bluetooth settings on your device: Ensure that the Bluetooth function is enabled on your device and that it is discoverable or visible to other devices. 2. Reset the Bluetooth connection: Turn off the Bluetooth function on both the cradle/docking station and your device. Then, turn them back on and try reconnecting them. 3. Remove previous pairings: If you have previously paired your device with the cradle/docking station, delete the pairing history on both devices. Then, perform a fresh pairing process. 4. Check the distance and obstacles: Make sure that your device is within the Bluetooth range of the cradle/docking station, which is typically around 10 meters. Remove any obstacles or interference sources, such as walls or other electronic devices, that may affect the Bluetooth signal. 5. Update firmware and software: Check if there are any firmware or software updates available for your cradle/docking station and your device. Install the updates if available, as they may include bug fixes or improvements for Bluetooth connectivity. If the issue persists after following these steps, it is recommended to consult the Pioneer customer support for further assistance.
If the Pioneer X-CM42BT cradle/docking station is not recognizing your iPod/iPhone/iPad, you can check the following: 1. Compatibility: Ensure that your iPod/iPhone/iPad model is compatible with the cradle/docking station. Refer to the manual or product specifications to verify the supported models. 2. Connection: Check the physical connection between the cradle/docking station and your iPod/iPhone/iPad. Make sure the device is securely docked or connected to the appropriate port. 3. Clean the connectors: Inspect the connectors on both the cradle/docking station and your iPod/iPhone/iPad for any dirt, dust, or debris. Clean them gently using a soft, lint-free cloth. 4. Update software: Ensure that your iPod/iPhone/iPad has the latest software version installed. Check for any available updates and install them if necessary. 5. Restart devices: Try restarting both the cradle/docking station and your iPod/iPhone/iPad. Power them off, wait for a few seconds, and then power them back on. 6. Reset settings: If the issue persists, you can try resetting the settings on your iPod/iPhone/iPad. This can help resolve any software-related conflicts. Refer to your device's user manual or settings menu for instructions on how to perform a reset. If the problem continues, it is recommended to contact Pioneer customer support for further assistance.
If the Pioneer X-CM42BT cradle/docking station is not turning on, you can troubleshoot the issue by following these steps: 1. Check the power source: Ensure that the cradle/docking station is properly connected to a power outlet and that the power cord is securely plugged in. Try using a different power outlet or power cord to rule out any issues with the power source. 2. Verify the power switch: Make sure that the power switch on the cradle/docking station is in the "on" position. Some models may have a standby mode, so check if the power indicator light is illuminated. 3. Reset the cradle/docking station: If the power switch is already in the "on" position, try resetting the cradle/docking station. To do this, turn off the power, unplug the power cord, wait for a few seconds, and then plug it back in and turn on the power. 4. Check for any obstructions: Ensure that there are no objects blocking the ventilation holes or any buttons on the cradle/docking station. Clear any obstructions and try turning it on again. 5. Contact customer support: If the cradle/docking station still does not turn on after trying the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Remember to refer to the Pioneer X-CM42BT cradle/docking station when seeking support.
Yes, the manual of the Pioneer X-CM42BT is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0