Pioneer VSX-LX302 manual

Pioneer VSX-LX302
8.6 · 3
PDF manual
 · 97 pages
English
manualPioneer VSX-LX302
2
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc�|

> Basic Manual

General Specifications

Amplifier Section

Rated Output Power (IEC) (European)
7 ch × 170 W at 6 ohms, 1 kHz, 1 ch driven of 1%
THD
Dynamic Power ()
IEC60268-Short-term maximum output power
240 W (3 Ω, Front)
210 W (4 Ω, Front)
120 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz 100 W/8 Ω)
200 mV/47 kΩ (LINE (Unbalance))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/470 Ω (SUBWOOFER PRE OUT)
200 mV/2.3 kΩ (ZONE LINE OUT)
1 V/2.3 kΩ (ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5%)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Pure Direct)
Tone Control Characteristics
±10 dB, 90 Hz (BASS)
±10 dB, 7.5 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 Ω - 16 Ω
Headphone Output Impedance
330 Ω
Headphone Rated Output
80 mW (32 Ω, 1 kHz, 10% THD)

Video Section

Signal level
1 Vp-p/75 Ω (Composite Video)
1 Vp-p/75 Ω (Component Video Y)
0.7 Vp-p/75 Ω (Component Video B/R)
Maximum resolution supported by component video
480i/576i

Tuner Section

FM Tuning Frequency Range
87.5 MHz - 108.0 MHz, RDS
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
40

Network Section

Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi
R
standard)
5 GHz/2.4 GHz band

BLUETOOTH Section

Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 15 m ()
½
The actual range will vary depending on factors
such as obstacles between devices, magnetic fields
around a microwave oven, static electricity, cordless
phone, reception sensitivity, antenna's performance,
operating system, software application, etc.

General

Power Supply
AC 220 - 240 V, 50/60 Hz
Power Consumption
570 W
0.15 W (Stand-by)
60 W (No-sound)
5.7 W (HDMI Standby Through)
2.6 W (Network Standby)
Dimensions (W × H × D)
435 mm × 173 mm × 370.5 mm
Weight
10 kg

HDMI

Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STRM BOX),
IN4 (GAME), IN5, IN6, AUX INPUT HDMI (front)
Output
OUT MAIN (ARC), OUT SUB
Supported
Deep Color, x.v.Color™, LipSync, Audio Return
Channel, 3D, 4K 60 Hz, CEC, Extended Colorimetry
(sYCC601, Adobe RGB, Adobe YCC601), Content
Type, HDR
Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby
Digital Plus, DTS, DTS:X, DTS-HD Master Audio,
DTS-HD High Resolution Audio, DTS 96/24, DTS-

View the manual for the Pioneer VSX-LX302 here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-LX302 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
G
George MeltonMay 10, 2023

Can I change the pre amp/ zone 2 volume?

The Pioneer VSX-LX302 is a receiver with a 7.1 channel audio output that offers a variety of connectivity options. It features built-in Wi-Fi and Bluetooth capabilities, allowing for convenient wireless streaming of music and other audio content. The receiver has a total harmonic distortion (THD) percentage of 1%, ensuring high-quality sound reproduction with minimal distortion. It has an impedance of 6 Ω, which indicates its compatibility with a range of speakers. The VSX-LX302 also supports Audio Return Channel (ARC) functionality, enabling audio to be sent from a compatible TV back to the receiver through a single HDMI cable. It supports both AM and FM radio bands, with the ability to preset up to 40 stations for easy access. With a color depth of 36 bits, this receiver is capable of displaying vibrant and detailed visuals when connected to a compatible display. It supports 1080p video modes, ensuring crisp and clear video playback. Additionally, it has 3D capabilities, allowing for an immersive viewing experience when used with compatible devices. AirPlay is supported by the VSX-LX302, providing the option to wirelessly stream audio from Apple devices. In summary, the Pioneer VSX-LX302 is a feature-rich receiver that offers a wide range of connectivity options and capabilities. From its Wi-Fi and Bluetooth functionality to its support for various audio and video formats, this receiver provides a versatile and convenient audiovisual experience.

General
BrandPioneer
ModelVSX-LX302 | VSX-LX302-B
Productreceiver
EAN4573211152432
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Audio output channels7.1 channels
Total Harmonic Distortion (THD)1 %
Impedance6 Ω
Audio D/A Converter (DAC)32-bit/384kHz
Power output per channel (20-20KHz@8 Ohm)100 W
Receiver typeSurround
Power output per channel (1KHz@6 Ohm)170 W
Technical details
Product colorBlack
Audio decodersDTS 96/24, DTS-ES, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital Plus, Dolby Surround, Dolby TrueHD
Audio Return Channel (ARC)Yes
Color depth36 bit
AirPlayYes
Graphical user interface (GUI)Yes
Sleep timerYes
RS-232 interfaceYes
Headphone outYes
Detachable power cordYes
Deep color supportYes
x.v.Color supportYes
EqualizerYes
Apple dockingYes
Handheld remote controlYes
Multi-Zone capabilityYes
Multi-Room Streaming (MRS) supportYes
Volume controlRotary
Display-
Bi-ampingYes
Apple docking compatibilityiPad, iPhone, iPod
Network
Wi-FiYes
BluetoothYes
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP
Ethernet LANYes
Wi-Fi readyYes
Radio
Supported radio bandsAM, FM
Preset stations quantity40
Internet radio services supportedPandora, Spotify, TuneIn
Internet radioYes
Video
Supported video modes1080p
3DYes
File formats
Audio formats supportedAIFF, ALAC, DSD, FLAC, WAV
Inputs
HDMI in7
USB ports quantity2
PC Audio inYes
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in1
Composite video in2
Digital audio coaxial in1
Digital audio optical in2
Remote (IR) input1
Outputs
Headphone outputs1
Number of HDMI outputs2
Line-outYes
Ports & interfaces
12V triggerYes
12V trigger ports quantity2
RS-232 ports1
Connectivity technologyWired & Wireless
Weight & dimensions
Width435 mm
Depth370.5 mm
Height173 mm
Weight10000 g
Optical drive
Optical drive included-
Storage
Card reader integrated-
Packaging content
ManualYes
Warranty cardYes
User guideYes
FM antennaYes
AM antennaYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-LX302 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-LX302?

The Pioneer VSX-LX302 has a weight of 10000 g.

What is the height of the Pioneer VSX-LX302?

The Pioneer VSX-LX302 has a height of 173 mm.

What is the width of the Pioneer VSX-LX302?

The Pioneer VSX-LX302 has a width of 435 mm.

What is the depth of the Pioneer VSX-LX302?

The Pioneer VSX-LX302 has a depth of 370.5 mm.

How do I connect my Pioneer VSX-LX302 receiver to my television?

Make sure you use an HDMI cable to connect the HDMI OUT port on the receiver to an available HDMI input on your television. Then, select the corresponding HDMI input on your TV.

What is the recommended way to calibrate the audio settings on my Pioneer VSX-LX302?

Navigate to the receiver's setup menu and select the "Audio" or "Speaker" settings. From there, you can run the built-in calibration system, which will analyze your speakers and room acoustics to optimize the audio output.

How can I set up a multi-room audio system using my Pioneer VSX-LX302?

Ensure that the receiver is connected to a stable network. Then, access the receiver's network settings and enable the "Zone 2" feature. This allows you to connect additional speakers in another room and control the audio independently using the receiver's Zone 2 controls.

Can I customize the sound settings on my Pioneer VSX-LX302 for different music genres?

Absolutely! Within the receiver's audio settings, you can adjust the equalizer to fine-tune the sound based on your preferences. Experiment with different frequencies to enhance or attenuate certain aspects of the audio, such as bass or treble.

How do I update the firmware of my Pioneer VSX-LX302?

Connect the receiver to your home network using an Ethernet cable or Wi-Fi. Then, access the receiver's setup or system menu and navigate to the firmware update section. Here, you can check for the latest firmware version and initiate the update process if a new version is available.

Does the Pioneer VSX-LX302 have 7.1 audio output channels?

Yes, the Pioneer VSX-LX302 has 7.1 audio output channels. This means that it can support surround sound setups with up to 7 speakers and a subwoofer, providing an immersive audio experience for the user.

Does the Pioneer VSX-LX302 have Wi-Fi and Bluetooth?

Yes, the Pioneer VSX-LX302 has both Wi-Fi and Bluetooth capabilities. This allows the user to connect wirelessly to their home network for streaming audio or use Bluetooth to easily connect their devices and stream music wirelessly.

What is the Total Harmonic Distortion (THD) of the Pioneer VSX-LX302?

The Total Harmonic Distortion (THD) of the Pioneer VSX-LX302 is 1%. This means that the receiver produces very little distortion in the audio output, resulting in clean and high-quality sound for the user.

What is the Impedance of the Pioneer VSX-LX302?

The Impedance of the Pioneer VSX-LX302 is 6 Ω. This indicates the resistance of the receiver to the flow of electrical current. A lower impedance allows for higher current flow and can result in louder and more powerful sound output from the speakers.

Does the Pioneer VSX-LX302 support 3D video mode?

Yes, the Pioneer VSX-LX302 supports 3D video mode. This means that it can process and display 3D content, providing an enhanced visual experience for the user when watching compatible movies or playing games.

Is the manual of the Pioneer VSX-LX302 available in English?

Yes, the manual of the Pioneer VSX-LX302 is available in English .

Is your question not listed? Ask your question here

No results