Pioneer VSX-D811S-S manual

Pioneer VSX-D811S-S
8.8 · 2
PDF manual
 · 132 pages
English
manualPioneer VSX-D811S-S

Setting up your receiver06

74
En/Ge

Konfiguration des Receivers

Dual mono setting

Default setting: ch1
The dual mono setting can only be used when
listening to Dolby Digital discs with dual mono
encoding. These discs are not widely used, but
are sometimes used when it is necessary to
have one language on one channel and a
different language on the other. With this
setting you can choose which channel in the
dual mono setting you want to listen to.
You will hear the channel you have selected
(either ch1 or ch2) through your center speaker.
If you dont have a center speaker, you will hear
the channel you have selected through both
front speakers. In the L ch 1. R ch 2 setting, the
left front speaker will play channel 1 and the
right front speaker will play channel 2.
Use or to cycle through the
possible dual mono settings.
ch2
L ch 1.R ch 2
ch1

Dual Mono-Einstellung

Standardeinstellung: ch1
Die Dual Mono-Einstellung kann nur bei Dolby
Digital-Discs mit Dual Mono-Codierung
verwendet werden. Diese Discs sind noch nicht
sehr gebräuchlich, werden jedoch manchmal
verwendet, wenn eine Sprache auf einem Kanal
und eine andere Sprache auf einem anderen
Kanal notwendig sind. Mit dieser Einstellung
können Sie wählen, welchen Kanal in der Dual
Mono-Einstellung Sie hören möchten.
Sie hören den Kanal, den Sie gewählt haben
(entweder ch1 oder ch2) aus Ihrem Center-
Lautsprecher. Wenn Sie keinen Center-
Lautsprecher haben, hören Sie den Kanal, den
Sie gewählt haben, aus beiden Front-
Lautsprechern. Bei der Einstellung L ch 1. R ch
2 gibt der linke Front-Lautsprecher Kanal 1
wieder und der rechte Front-Lautsprecher gibt
Kanal 2 wieder.
Schalten Sie mit oder durch die
verschiedenen möglichen Dual Mono-
Einstellungen.
ch2
L ch 1.R ch 2
ch1
XRE3059A_EnGe_065078 02.2.18, 3:15 PM74

View the manual for the Pioneer VSX-D811S-S here, for free. This manual comes under the category receivers and has been rated by 2 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-D811S-S or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
J
John BealeNovember 16, 2022

My Pioneer VSX 811S receiver has sound only from the rear speakers in surround sound mode. It was working fine, but today I can not get the surround sound to work.

F
Frode SkarFebruary 9, 2024

Download

The Pioneer VSX-D811S-S is a receiver that is designed to enhance the audio experience in a home entertainment system. With its sleek and modern design, it seamlessly integrates into any contemporary living space. The receiver is equipped with a variety of audio inputs and outputs, allowing for versatile connectivity options. Featuring Dolby Digital and DTS decoding, the Pioneer VSX-D811S-S is capable of delivering immersive surround sound for a truly captivating listening experience. The receiver also supports multiple playback formats, including CD, DVD, and MP3, ensuring compatibility with a wide range of audio sources. Equipped with built-in amplification, the Pioneer VSX-D811S-S is capable of powering multiple speakers simultaneously. This allows for the creation of a multi-room audio system, perfect for those looking to expand their audio setup throughout their home. The receiver also features a host of advanced audio processing technologies, such as Virtual Surround and Bass Boost. These features help to further enhance the audio quality, providing a more dynamic and well-balanced sound. With its user-friendly interface and intuitive controls, the Pioneer VSX-D811S-S is easy to set up and navigate. The receiver also includes a remote control, allowing for convenient operation from a distance. In summary, the Pioneer VSX-D811S-S is a reliable and versatile receiver that offers high-quality audio performance. Its compatibility with various audio sources and advanced features make it a suitable choice for those looking to elevate their home entertainment system.

General
BrandPioneer
ModelVSX-D811S-S
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-D811S-S below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer VSX-D811S-S receiver to my TV?

Make sure to use an HDMI cable to connect the HDMI output of your receiver to the HDMI input on your TV. The HDMI connection will handle both video and audio signals, providing a high-quality and hassle-free setup.

How can I optimize the sound settings on my Pioneer VSX-D811S-S?

Navigate to the receiver's audio settings menu and adjust parameters such as speaker size, crossover frequency, and channel levels. Take advantage of the built-in equalizer to fine-tune the audio frequencies to your preference and optimize the sound output for your specific room.

How can I set up and calibrate the speakers correctly?

Utilize the built-in automatic speaker calibration system on your Pioneer VSX-D811S-S. Follow the on-screen instructions to position the included microphone at your primary listening position, and the receiver will analyze the sound waves to optimize the speaker settings accordingly for an optimal listening experience.

How do I switch between different audio sources on my Pioneer VSX-D811S-S?

Use the input selector buttons located on the front panel or the included remote control to cycle through the available audio sources. Ensure that each source is correctly connected to the corresponding input on the back of the receiver for seamless switching.

What is the recommended power rating for speakers to be used with the Pioneer VSX-D811S-S?

It is recommended to use speakers with a power rating of 20 to 200 Watts per channel with the Pioneer VSX-D811S-S receiver. This power range ensures optimal performance and prevents overloading or damage to the speakers.

Is the manual of the Pioneer VSX-D811S-S available in English?

Yes, the manual of the Pioneer VSX-D811S-S is available in English .

Is your question not listed? Ask your question here

No results