Pioneer VSX-924 manual

Pioneer VSX-924
6.9 · 4
PDF manual
 · 121 pages
English
manualPioneer VSX-924
82
The Advanced MCACC menu
11

Manual MCACC setup

You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more
familiar with the system. Before making these settings, you should have already completed Automatically con-
ducting optimum sound tuning (Full Auto MCACC) on page 37 .
You only need to make these settings once (unless you change the placement of your current speaker system or
add new speakers).
CAUTION
! The test tones used in the Manual MCACC setup are output at high volume.
Important
! Press the MCACC button while the pertinent setup screens are displayed to select MCACC presets.
! For some of the settings below, you’ll have to connect the setup microphone to the front panel and place it
about ear level at your normal listening position. Press HOME MENU to display the HOME MENU before you
connect the microphone to this receiver.
! See Problems when using the Auto MCACC Setup on page 38 for notes regarding high background noise
levels and other possible interference.
! If you’re using a subwoofer, switch it on and turn up the volume to the middle position.
1 Select ‘Manual MCACC’ from the Advanced MCACC menu.
See Making receiver settings from the Advanced MCACC menu on page 80 if you’re not already at this screen.
2 Select the setting you want to adjust.
If you’re doing this for the first time, you might want to make these settings in order.
! Fine Channel Level – Make fine adjustments to the overall balance of your speaker system (see Fine Channel
Level on page 82 ).
! Fine SP Distance – Make precise delay settings for your speaker system (see Fine Speaker Distance on page
82 ).
! Standing Wave – Control overly resonant low frequencies in your listening room (see Standing Wave on
page 83 ).
The last two settings are specifically for customizing the parameters explained in Acoustic Calibration EQ Adjust
on page 83 :
! EQ Adjust – Manually adjust the frequency balance of your speaker system while listening to test tones (see
Acoustic Calibration EQ Adjust on page 83 ).
! EQ Professional – Calibrate your system based on the direct sound coming from the speakers and make
detailed settings according to your room’s reverb characteristics (see Acoustic Calibration EQ Professional
on page 83 ).
Fine Channel Level
! Default setting: 0.0dB (all channels)
You can achieve better surround sound by properly adjusting the overall balance of your speaker system. You can
adjust the Channel Level of each speaker in 0.5 dB increments. The following setting can help you make detailed
adjustments that you may not achieve using the Manual speaker setup on page 87 .
1 Select ‘Fine Channel Level’ from the Manual MCACC setup menu.
The volume increases to the 0.0 dB reference level.
2 Adjust the level of the left channel.
This will be the reference speaker level, so you may want to keep the level around 0.0dB so that you’ll have plenty
of room to adjust the other speaker levels.
! After pressing ENTER, test tones will be output.
3 Select each channel in turn and adjust the levels (+/–12.0 dB) as necessary.
Use k/l to adjust the volume of the speaker you selected to match the reference speaker. When it sounds like
both tones are the same volume, press j to confirm and continue to the next channel.
! For comparison purposes, the reference speaker will change depending on which speaker you select.
! If you want to go back and adjust a channel, simply use i/j to select it.
4 When you’re finished, press RETURN.
You will return to the Manual MCACC setup menu.
Fine Speaker Distance
! Default setting: 3.00 m (all speakers)
For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some
speakers so that all sounds will arrive at the listening position at the same time. You can adjust the distance of
each speaker in 1 cm increments. The following setting can help you make detailed adjustments that you may not
achieve using the Manual speaker setup on page 87 .
1 Select ‘Fine SP Distance’ from the Manual MCACC setup menu.2 Adjust the distance of the left channel from the listening position.3 Select each channel in turn and adjust the distance as necessary.
Use k/l to adjust the delay of the speaker you selected to match the reference speaker.
Listen to the reference speaker and use it to measure the target channel. From the listening position, face the two
speakers with your arms outstretched pointing at each speaker. Try to make the two tones sound as if they are
arriving simultaneously at a position slightly in front of you and between your arm span.
! If you can’t seem to achieve this by adjusting the distance setting, you may need to change the angle of your
speakers very slightly.
! The subwoofer’s test tone differs in tone from other channels. Adjust so that the sound of the subwoofer can
be heard distinctly. Note that when adjusting the subwoofer, depending on the low frequency response of
your speaker, it may be difficult to hear the change even when the setting is increased or decreased or when
the position of the speaker is changed. Note that it may be difficult to compare this tone with the other speak-
ers in your setup (depending on the low frequency response of the reference speaker).
When it sounds like the delay settings are matched up, press j to confirm and continue to the next channel.
! For comparison purposes, the reference speaker will change depending on which speaker you select.
! If you want to go back and adjust a channel, simply use i/j to select it.
4 When you’re finished, press RETURN.
You will return to the Manual MCACC setup menu.
 

 

 

 

View the manual for the Pioneer VSX-924 here, for free. This manual comes under the category receivers and has been rated by 4 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-924 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
M
Mar ViloriaJuly 31, 2022

My unit model Pioneer A/V Receiver VSX-924 can not be switch on through remote control. The red light indicator of ADVANCED MCACC keep on flashing. Kindly send advise what to do for this matter. Thanks

D
DebbieJanuary 22, 2016

I can't get my iPhone to pick up Bluetooth from the amp

The Pioneer VSX-924 is a receiver with 7.2 audio output channels, providing a multi-dimensional surround sound experience. It delivers high fidelity audio, with a low Total Harmonic Distortion (THD) of 1%, resulting in crisp and clear sound reproduction. The receiver has an input sensitivity of 315 mV, allowing it to effortlessly connect to various audio sources. It is equipped with multiple connectivity options, including HDMI in ports, composite video in ports, and digital audio optical and coaxial in ports. This allows for easy integration with a wide range of devices, such as televisions, gaming consoles, and audio players. With an output impedance of 6 Ω, the Pioneer VSX-924 ensures stable and reliable signal transmission to connected speakers. The receiver also boasts a high Signal-to-Noise Ratio (SNR) of 100 dB, minimizing any unwanted background noise and enhancing audio clarity. Additionally, this receiver features a pre-out connectivity option, enabling users to connect external amplifiers for an even more powerful sound experience. The Pioneer VSX-924 is designed to enhance the overall audio quality and create an immersive home theater environment. With its sleek design and intuitive user interface, the Pioneer VSX-924 is easy to set up and use. Its solid construction and premium materials ensure durability and longevity. This receiver is an ideal choice for anyone seeking a high-quality audio solution for their home entertainment system.

General
BrandPioneer
ModelVSX-924 | VSX-924-K
Productreceiver
EAN4988028244100
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)- W
Audio output channels7.2 channels
Total Harmonic Distortion (THD)1 %
Input sensitivity315 mV
Input impedance47000 Ω
Output impedance6 Ω
Audio D/A Converter (DAC)24-bit/192kHz
Audio A/D Converter (ADC)24-bit/96kHz
Signal-to-Noise Ratio (SNR)100 dB
Pre-out connectivityYes
Receiver typeSurround
Power output per channel (1KHz@8 Ohm)105 W
Power output per channel (1KHz@6 Ohm)150 W
Inputs
HDMI in7
Composite video in2
Digital audio optical in1
Digital audio coaxial in1
Remote (IR) input1
Line-inYes
Ethernet LAN (RJ-45) ports1
USB ports quantity2
AC (power) inYes
Component video (YPbPr/YCbCr) in1
Outputs
Number of HDMI outputs2
Audio (L/R) out2
Remote (IR) output1
Headphone outputs1
Headphone connectivity3.5 mm
Line-outYes
Multichannel audio output typeRCA
Ports & interfaces
Speakers connectivity typeRCA
Connectivity technologyWired & Wireless
Multichannel pre out connectivityRCA
File formats
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Network
Ethernet LANYes
Wi-FiYes
BluetoothYes
Wi-Fi readyYes
Radio
Supported radio bandsAM, FM
Internet radioYes
Internet radio services supportedSpotify, vTuner
Radio Data System (RDS)Yes
Preset stations quantity63
Optical drive
Optical drive includedNo
Storage
Card reader integratedNo
Video
Supported video modes1080i, 1080p, 480p, 720p
3DYes
Video upscalingYes
Technical details
DisplayLED
Audio decodersDolby Pro Logic IIz, Dolby TrueHD, DTS Neo:X, DTS-HD Master Audio
x.v.Color supportYes
Deep color supportYes
EqualizerYes
Mobile High-Definition Link (MHL)Yes
Bass adjustmentYes
Treble adjustmentYes
Graphical user interface (GUI)Yes
Graphical user interface (GUI) languageDutch, English, French, German, Italian, Russian, Spanish
Handheld remote controlYes
Product colorBlack
Audio amplifierYes
Sleep timerYes
Volume controlRotary
Apple docking compatibility-
Surround modes quantity12
AirPlayYes
Quantity1
Sample rate24 kHz
Auto standbyYes
Yes
Power
AC input voltage220-230 V
AC input frequency50 - 60 Hz
Power consumption (typical)550 W
Power consumption (standby)0.1 W
Weight & dimensions
Width435 mm
Depth362.5 mm
Height168 mm
Weight9800 g
Other features
Compatible operating systemsWindows 8.1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-924 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-924?

The Pioneer VSX-924 has a weight of 9800 g.

What is the height of the Pioneer VSX-924?

The Pioneer VSX-924 has a height of 168 mm.

What is the width of the Pioneer VSX-924?

The Pioneer VSX-924 has a width of 435 mm.

What is the depth of the Pioneer VSX-924?

The Pioneer VSX-924 has a depth of 362.5 mm.

How do I connect my speakers to the Pioneer VSX-924 receiver?

Make sure to use the appropriate speaker cables and connect them to the corresponding speaker terminals on the back of the receiver, ensuring a secure connection.

What is the optimal placement for my receiver in my entertainment setup?

It is recommended to place the Pioneer VSX-924 receiver in a well-ventilated area with ample space around it to avoid overheating. Avoid placing it in enclosed spaces or near heat-emitting devices.

How can I adjust the audio settings on the receiver to enhance my listening experience?

Navigate to the audio settings menu on the receiver's interface, where you can fine-tune various parameters such as equalizer settings, sound mode selection, dialogue enhancement, and bass/treble adjustments to suit your preferences.

How can I connect my external devices (e.g., DVD player, gaming console) to the receiver?

Utilize the available HDMI, optical, or coaxial inputs on the Pioneer VSX-924 receiver to connect your external devices. Ensure that the input source on the receiver matches the corresponding input you are using for your device.

Can I set up a multi-room audio system with the Pioneer VSX-924 receiver?

Yes, the receiver supports multi-room audio functionality. Refer to the receiver's menu options to configure the multi-room settings, allowing you to play audio in different rooms simultaneously or independently using compatible speakers.

How many audio output channels does the Pioneer VSX-924 have?

The Pioneer VSX-924 has 7.2 audio output channels. This means it can support a surround sound setup with multiple speakers, providing an immersive audio experience for the user.

What is the Total Harmonic Distortion (THD) of the Pioneer VSX-924?

The THD of the Pioneer VSX-924 is 1%. This indicates that the receiver produces relatively low distortion in the audio output, resulting in cleaner and more accurate sound reproduction.

What is the input sensitivity of the Pioneer VSX-924?

The input sensitivity of the Pioneer VSX-924 is 315 mV. This means it requires a moderate input signal level to produce an optimal audio output.

Does the Pioneer VSX-924 have pre-out connectivity?

Yes, the Pioneer VSX-924 has pre-out connectivity. This allows users to connect additional power amplifiers or subwoofers, enabling greater flexibility in their audio setup.

How many HDMI inputs does the Pioneer VSX-924 have?

The Pioneer VSX-924 has 7 HDMI inputs. This is a generous amount of HDMI inputs, allowing users to connect multiple devices such as gaming consoles, media players, and Blu-ray players easily.

Is the manual of the Pioneer VSX-924 available in English?

Yes, the manual of the Pioneer VSX-924 is available in English .

Is your question not listed? Ask your question here

No results