Pioneer VSX-924 manual

Pioneer VSX-924
6.9 · 4
PDF manual
 · 121 pages
English
manualPioneer VSX-924
65
Using other functions
09

Setting the Audio options

There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The
defaults, if not stated, are listed in bold. Important
! Note that if a setting doesn’t appear in the AUDIO PARAMETER menu, it is unavailable due to the current
source, settings and status of the receiver.1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and then press AUDIO P..
2 Use i/j to select the setting you want to adjust.
Depending on the current status/mode of the receiver, certain options may not be able to be selected. Check the table below for notes on this.
3 Use k/l to set as necessary.
See the table below for the options available for each setting.4 Press RETURN to confirm and exit the menu.
Audio parameter menu
Setting What it does Option(s)
MCACC
(MCACC preset)
Selects your favorite MCACC preset memory when multiple preset
memories are saved. When an MCACC preset memory has been
renamed, the given name is displayed.
c M1. MEMORY 1 to
M6. MEMORY 6 d
Default: M1. MEM-
ORY 1
EQ
(Acoustic Calibration EQ)
Switches on/off the effects of EQ Pro.
ON
OFF
S-WAVE
(Standing Wave)
Switches on/off the effects of Standing Wave Control.
ON
OFF
PHASE
(Phase Control)
Switches on/off the effects of Phase Control (page 53 ).
ON
OFF
Phase C+
(Phase Control Plus)
For discs created with standards other than Phase Control, the LFE
channel is delayed upon recording in the first place. This function
corrects for phase shifting on such discs.
This function is especially effective when playing music.
When AUTO is selected, not only the low range delay but also the
polarity and correlation are detected to achieve the optimum effect.
c AUTO/0 to 16 (ms) d
Default: AUTO
DELAY
(Sound Delay)
Some monitors have a slight delay when showing video, so the
soundtrack will be slightly out of sync with the picture. By adding a
bit of delay, you can adjust the sound to match the presentation of
the video.
c 0 to 800 (ms) d
Default: 0
TONE
(Tone Control)
Applies the treble and bass tone controls to a source, or bypasses
them completely.
This setting is only displayed when the listening mode is STEREO,
Auto surround (STEREO) or SOUND RETRIEVER AIR.
BYPASS
ON
BASS
<a>
Adjusts the amount of bass.
c –6 to +6 (dB) d
Default: 0 (dB)
TREBLE
<a>
Adjusts the amount of treble.
c –6 to +6 (dB) d
Default: 0 (dB)
Setting What it does Option(s)
S.RTRV
(Auto Sound Retriever)
<b>
With the Auto Sound Retriever function, DSP processing is used to
compensate for the loss of audio data upon compression, improving
the sound’s sense of density and modulation.
Also, when a player supporting the Sound Retriever Link function is
connected to the receiver by HDMI, by setting this to ON, the bitrate
information of the compressed audio file being played on the player
is acquired using the Control with HDMI function, and the sound is
optimized based on this information (Sound Retriever Link).
OFF
ON
DNR
(Digital Noise Reduction)
May improve the quality of sound in a noisy source (for example, video
tape with lots of background noise) when switched on.
This only has an effect with 2-channel signal inputs.
This mode is effective for contents with a sampling frequency of 48
kHz or less.
OFF
ON
DIALOG E
(Dialog Enhancement)
<c>
Localizes dialog in the center channel to make it stand out from other
background sounds in a TV or movie soundtrack. By moving from UP1
through UP2 and UP3 up to UP4, you can make the sound source
seem to relocate upwards.
c OFF/FLAT/UP1/UP2/
UP3/UP4 d
Default: OFF
Hi-bit24
Creates a wider dynamic range with digital sources like CDs, DVDs or
BDs. 16- and 20-bit PCM as well as compressed audio is requantized
to 24 bits, more subtle musical expression.
This mode is effective for contents with a sampling frequency of 48
kHz or less.
ON
OFF
PQLS
(Precision Quartz Lock Sys-
tem)
Switches the PQLS function between AUTO and OFF (Setting the
PQLS function on page 62 ).
AUTO
OFF
DUAL
(Dual Mono)
Specifies how dual mono encoded Dolby Digital soundtracks should
be played. Dual mono is not widely used, but is sometimes necessary
when two languages need to be sent to separate channels.
CH1 – Channel 1 is
heard only
CH2 – Channel 2 is
heard only
CH1 CH2 – Both chan-
nels heard from front
speakers
SIGSEL
(Signal Select)
Use to switch the input signal type (analog/digital/HDMI) (page 53 ).
AUTO
ANALOG
DIGITAL
<d>
HDMI
Fixed PCM
This is useful if you find there is a slight delay before OFF recognizes
the PCM signal on a CD, for instance.
When ON is selected, noise may be output during playback of non-
PCM sources. Please select another input signal if this is a problem.
OFF
ON
DRC
(Dynamic Range Control)
<e>
Adjusts the level of dynamic range for movie soundtracks optimized
for Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, DTS-HD and
DTS-HD Master Audio (you may need to use this feature when listen-
ing to surround sound at low volumes).
AUTO
MAX
MID
OFF
Loud Mgmt
(Loudness Management)
This is a setting of the post process function of the Dolby TrueHD
decoder. By setting to OFF, you can enjoy higher sound quality.
This can only be set when DRC is set to OFF and the input signal is a
Dolby TrueHD signal.
ON
OFF
 

 

 

 

View the manual for the Pioneer VSX-924 here, for free. This manual comes under the category receivers and has been rated by 4 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-924 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
M
Mar ViloriaJuly 31, 2022

My unit model Pioneer A/V Receiver VSX-924 can not be switch on through remote control. The red light indicator of ADVANCED MCACC keep on flashing. Kindly send advise what to do for this matter. Thanks

D
DebbieJanuary 22, 2016

I can't get my iPhone to pick up Bluetooth from the amp

The Pioneer VSX-924 is a receiver with 7.2 audio output channels, providing a multi-dimensional surround sound experience. It delivers high fidelity audio, with a low Total Harmonic Distortion (THD) of 1%, resulting in crisp and clear sound reproduction. The receiver has an input sensitivity of 315 mV, allowing it to effortlessly connect to various audio sources. It is equipped with multiple connectivity options, including HDMI in ports, composite video in ports, and digital audio optical and coaxial in ports. This allows for easy integration with a wide range of devices, such as televisions, gaming consoles, and audio players. With an output impedance of 6 Ω, the Pioneer VSX-924 ensures stable and reliable signal transmission to connected speakers. The receiver also boasts a high Signal-to-Noise Ratio (SNR) of 100 dB, minimizing any unwanted background noise and enhancing audio clarity. Additionally, this receiver features a pre-out connectivity option, enabling users to connect external amplifiers for an even more powerful sound experience. The Pioneer VSX-924 is designed to enhance the overall audio quality and create an immersive home theater environment. With its sleek design and intuitive user interface, the Pioneer VSX-924 is easy to set up and use. Its solid construction and premium materials ensure durability and longevity. This receiver is an ideal choice for anyone seeking a high-quality audio solution for their home entertainment system.

General
BrandPioneer
ModelVSX-924 | VSX-924-K
Productreceiver
EAN4988028244100
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)- W
Audio output channels7.2 channels
Total Harmonic Distortion (THD)1 %
Input sensitivity315 mV
Input impedance47000 Ω
Output impedance6 Ω
Audio D/A Converter (DAC)24-bit/192kHz
Audio A/D Converter (ADC)24-bit/96kHz
Signal-to-Noise Ratio (SNR)100 dB
Pre-out connectivityYes
Receiver typeSurround
Power output per channel (1KHz@8 Ohm)105 W
Power output per channel (1KHz@6 Ohm)150 W
Inputs
HDMI in7
Composite video in2
Digital audio optical in1
Digital audio coaxial in1
Remote (IR) input1
Line-inYes
Ethernet LAN (RJ-45) ports1
USB ports quantity2
AC (power) inYes
Component video (YPbPr/YCbCr) in1
Outputs
Number of HDMI outputs2
Audio (L/R) out2
Remote (IR) output1
Headphone outputs1
Headphone connectivity3.5 mm
Line-outYes
Multichannel audio output typeRCA
Ports & interfaces
Speakers connectivity typeRCA
Connectivity technologyWired & Wireless
Multichannel pre out connectivityRCA
File formats
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Network
Ethernet LANYes
Wi-FiYes
BluetoothYes
Wi-Fi readyYes
Radio
Supported radio bandsAM, FM
Internet radioYes
Internet radio services supportedSpotify, vTuner
Radio Data System (RDS)Yes
Preset stations quantity63
Optical drive
Optical drive includedNo
Storage
Card reader integratedNo
Video
Supported video modes1080i, 1080p, 480p, 720p
3DYes
Video upscalingYes
Technical details
DisplayLED
Audio decodersDolby Pro Logic IIz, Dolby TrueHD, DTS Neo:X, DTS-HD Master Audio
x.v.Color supportYes
Deep color supportYes
EqualizerYes
Mobile High-Definition Link (MHL)Yes
Bass adjustmentYes
Treble adjustmentYes
Graphical user interface (GUI)Yes
Graphical user interface (GUI) languageDutch, English, French, German, Italian, Russian, Spanish
Handheld remote controlYes
Product colorBlack
Audio amplifierYes
Sleep timerYes
Volume controlRotary
Apple docking compatibility-
Surround modes quantity12
AirPlayYes
Quantity1
Sample rate24 kHz
Auto standbyYes
Yes
Power
AC input voltage220-230 V
AC input frequency50 - 60 Hz
Power consumption (typical)550 W
Power consumption (standby)0.1 W
Weight & dimensions
Width435 mm
Depth362.5 mm
Height168 mm
Weight9800 g
Other features
Compatible operating systemsWindows 8.1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-924 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-924?

The Pioneer VSX-924 has a weight of 9800 g.

What is the height of the Pioneer VSX-924?

The Pioneer VSX-924 has a height of 168 mm.

What is the width of the Pioneer VSX-924?

The Pioneer VSX-924 has a width of 435 mm.

What is the depth of the Pioneer VSX-924?

The Pioneer VSX-924 has a depth of 362.5 mm.

How do I connect my speakers to the Pioneer VSX-924 receiver?

Make sure to use the appropriate speaker cables and connect them to the corresponding speaker terminals on the back of the receiver, ensuring a secure connection.

What is the optimal placement for my receiver in my entertainment setup?

It is recommended to place the Pioneer VSX-924 receiver in a well-ventilated area with ample space around it to avoid overheating. Avoid placing it in enclosed spaces or near heat-emitting devices.

How can I adjust the audio settings on the receiver to enhance my listening experience?

Navigate to the audio settings menu on the receiver's interface, where you can fine-tune various parameters such as equalizer settings, sound mode selection, dialogue enhancement, and bass/treble adjustments to suit your preferences.

How can I connect my external devices (e.g., DVD player, gaming console) to the receiver?

Utilize the available HDMI, optical, or coaxial inputs on the Pioneer VSX-924 receiver to connect your external devices. Ensure that the input source on the receiver matches the corresponding input you are using for your device.

Can I set up a multi-room audio system with the Pioneer VSX-924 receiver?

Yes, the receiver supports multi-room audio functionality. Refer to the receiver's menu options to configure the multi-room settings, allowing you to play audio in different rooms simultaneously or independently using compatible speakers.

How many audio output channels does the Pioneer VSX-924 have?

The Pioneer VSX-924 has 7.2 audio output channels. This means it can support a surround sound setup with multiple speakers, providing an immersive audio experience for the user.

What is the Total Harmonic Distortion (THD) of the Pioneer VSX-924?

The THD of the Pioneer VSX-924 is 1%. This indicates that the receiver produces relatively low distortion in the audio output, resulting in cleaner and more accurate sound reproduction.

What is the input sensitivity of the Pioneer VSX-924?

The input sensitivity of the Pioneer VSX-924 is 315 mV. This means it requires a moderate input signal level to produce an optimal audio output.

Does the Pioneer VSX-924 have pre-out connectivity?

Yes, the Pioneer VSX-924 has pre-out connectivity. This allows users to connect additional power amplifiers or subwoofers, enabling greater flexibility in their audio setup.

How many HDMI inputs does the Pioneer VSX-924 have?

The Pioneer VSX-924 has 7 HDMI inputs. This is a generous amount of HDMI inputs, allowing users to connect multiple devices such as gaming consoles, media players, and Blu-ray players easily.

Is the manual of the Pioneer VSX-924 available in English?

Yes, the manual of the Pioneer VSX-924 is available in English .

Is your question not listed? Ask your question here

No results