Pioneer VSX-924 manual

Pioneer VSX-924
6.9 · 4
PDF manual
 · 121 pages
English
manualPioneer VSX-924
51
Listening to your system
06

Enjoying various types of playback using the listening modes

Using this receiver, you can listen to any source in surround sound. However, the options available will depend
on your speaker setup and the type of source you’re listening to.
To play with surround sound, check “Standard surround sound” or “Using the Advanced surround effects” below
and select the desired mode.
To play with the optimum mode for the input signal, see “Auto playback” or “Using Stream Direct”. (The sound is
played in stereo when 2-channel signals are input, in surround when multi-channel signals are input.)
Important
! The listening modes and many features described in this section may not be available depending on the cur-
rent source, settings and status of the receiver.
Auto playback
There are many ways to listen back to sources using this receiver, but the simplest, most direct listening option
is the Auto Surround feature. The receiver automatically detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
% While listening to a source, press AUTO (AUTO SURR/ALC/STREAM DIRECT) for auto playback of a source.
AUTO SURROUND shows briefly in the display before showing the decoding or playback format. Check the digi-
tal format indicators in the front panel display to see how the source is being processed.
! If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically
be selected and shows in the display.
! When listening to the ADAPTER PORT input, the SOUND RETRIEVER AIR feature is selected automatically.
ALC – In the Auto level control (ALC) mode, this receiver equalizes playback sound levels.
Also, the low and high frequency sounds, dialogs, surround effects, etc., that are difficult to hear when the vol-
ume is low are adjusted to be optimal for the volume level. This mode is particularly optimum when listening at
night.
Note
When ALC is selected, the effect level can be adjusted using the EFFECT parameter in Setting the Audio options
on page 65 .
Standard surround sound
The following modes provide basic surround sound for stereo and multichannel sources.
% While listening to a source, press SURR (STANDARD SURROUND).
If necessary, press repeatedly to select a listening mode.
! If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically
be selected and shows in the display.
! When only one surround back speaker is connected (set), even though a 5.1-channel signal is input,
Pro Logic IIx cannot be selected and Pro Logic II is used.
! Pro Logic IIz HEIGHT cannot be selected when no front height speaker is connected. Furthermore,
WIDE SURROUND MOVIE and WIDE SURROUND MUSIC cannot be selected when no front wide speaker is
connected.
With two channel sources, you can select from:
! Pro Logic IIx MOVIE – Up to 7.1 channel sound (surround back), especially suited to movie sources
! Pro Logic IIx MUSIC – Up to 7.1 channel sound (surround back), especially suited to music sources
! Pro Logic IIx GAME – Up to 7.1 channel sound (surround back), especially suited to video games
! PRO LOGIC – 4.1 channel surround sound (sound from the surround speakers is mono)
! Pro Logic IIz HEIGHT – Up to 7.1 channel sound (front height)
! WIDE SURROUND MOVIE – Up to 7.1 channel sound (front wide), especially suited to movie sources
! WIDE SURROUND MUSIC – Up to 7.1 channel sound (front wide), especially suited to music sources
! Neo:X CINEMA – Up to 7.1 channel sound (surround back, front height or front wide), especially suited to
movie sources
! Neo:X MUSIC – Up to 7.1 channel sound (surround back, front height or front wide), especially suited to music
sources
! Neo:X GAME – Up to 7.1 channel sound (surround back, front height or front wide), especially suited to video
games
! STEREO – The audio is heard with your sound settings and you can still use the audio options.
With multichannel sources, if you have connected surround back, front height or front wide speakers, you can select
(according to format):
! Pro Logic IIx MOVIE – See above
! Pro Logic IIx MUSIC – See above
! Dolby Digital EX – Creates surround back channel sound for 5.1 channel sources and provides pure decoding
for 6.1 channel sources (like Dolby Digital Surround EX)
! DTS-ES Matrix or DTS-ES Discrete – Allows you to hear 6.1 channel playback with DTS-ES encoded sources
! Neo:X CINEMA – See above
! Neo:X MUSIC – See above
! Neo:X GAME – See above
! Pro Logic IIz HEIGHT – See above
! WIDE SURROUND MOVIE – See above
! WIDE SURROUND MUSIC – See above
! STEREO – See above
! Straight Decode – Plays back without the effects above.
Notes
! When listening sources in Pro Logic IIz HEIGHT mode, you can also adjust the H.GAIN effect (see Setting
the Audio options on page 65 ).
! When listening to 2-channel sources in Dolby Pro Logic IIx Music mode, there are three further parameters you
can adjust: C.WIDTH,DIMENSION and PANORAMA. See Setting the Audio options on page 65 to adjust
them.
! When listening to 2-channel sources in Neo:X Cinema, Neo:X Music or Neo:X Game mode, you can also adjust
the C.GAIN effect (see Setting the Audio options on page 65 ).
! When listening through headphones, you can select STEREO mode only.
 

 

 

 

View the manual for the Pioneer VSX-924 here, for free. This manual comes under the category receivers and has been rated by 4 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-924 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
M
Mar ViloriaJuly 31, 2022

My unit model Pioneer A/V Receiver VSX-924 can not be switch on through remote control. The red light indicator of ADVANCED MCACC keep on flashing. Kindly send advise what to do for this matter. Thanks

D
DebbieJanuary 22, 2016

I can't get my iPhone to pick up Bluetooth from the amp

The Pioneer VSX-924 is a receiver with 7.2 audio output channels, providing a multi-dimensional surround sound experience. It delivers high fidelity audio, with a low Total Harmonic Distortion (THD) of 1%, resulting in crisp and clear sound reproduction. The receiver has an input sensitivity of 315 mV, allowing it to effortlessly connect to various audio sources. It is equipped with multiple connectivity options, including HDMI in ports, composite video in ports, and digital audio optical and coaxial in ports. This allows for easy integration with a wide range of devices, such as televisions, gaming consoles, and audio players. With an output impedance of 6 Ω, the Pioneer VSX-924 ensures stable and reliable signal transmission to connected speakers. The receiver also boasts a high Signal-to-Noise Ratio (SNR) of 100 dB, minimizing any unwanted background noise and enhancing audio clarity. Additionally, this receiver features a pre-out connectivity option, enabling users to connect external amplifiers for an even more powerful sound experience. The Pioneer VSX-924 is designed to enhance the overall audio quality and create an immersive home theater environment. With its sleek design and intuitive user interface, the Pioneer VSX-924 is easy to set up and use. Its solid construction and premium materials ensure durability and longevity. This receiver is an ideal choice for anyone seeking a high-quality audio solution for their home entertainment system.

General
BrandPioneer
ModelVSX-924 | VSX-924-K
Productreceiver
EAN4988028244100
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)- W
Audio output channels7.2 channels
Total Harmonic Distortion (THD)1 %
Input sensitivity315 mV
Input impedance47000 Ω
Output impedance6 Ω
Audio D/A Converter (DAC)24-bit/192kHz
Audio A/D Converter (ADC)24-bit/96kHz
Signal-to-Noise Ratio (SNR)100 dB
Pre-out connectivityYes
Receiver typeSurround
Power output per channel (1KHz@8 Ohm)105 W
Power output per channel (1KHz@6 Ohm)150 W
Inputs
HDMI in7
Composite video in2
Digital audio optical in1
Digital audio coaxial in1
Remote (IR) input1
Line-inYes
Ethernet LAN (RJ-45) ports1
USB ports quantity2
AC (power) inYes
Component video (YPbPr/YCbCr) in1
Outputs
Number of HDMI outputs2
Audio (L/R) out2
Remote (IR) output1
Headphone outputs1
Headphone connectivity3.5 mm
Line-outYes
Multichannel audio output typeRCA
Ports & interfaces
Speakers connectivity typeRCA
Connectivity technologyWired & Wireless
Multichannel pre out connectivityRCA
File formats
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Network
Ethernet LANYes
Wi-FiYes
BluetoothYes
Wi-Fi readyYes
Radio
Supported radio bandsAM, FM
Internet radioYes
Internet radio services supportedSpotify, vTuner
Radio Data System (RDS)Yes
Preset stations quantity63
Optical drive
Optical drive includedNo
Storage
Card reader integratedNo
Video
Supported video modes1080i, 1080p, 480p, 720p
3DYes
Video upscalingYes
Technical details
DisplayLED
Audio decodersDolby Pro Logic IIz, Dolby TrueHD, DTS Neo:X, DTS-HD Master Audio
x.v.Color supportYes
Deep color supportYes
EqualizerYes
Mobile High-Definition Link (MHL)Yes
Bass adjustmentYes
Treble adjustmentYes
Graphical user interface (GUI)Yes
Graphical user interface (GUI) languageDutch, English, French, German, Italian, Russian, Spanish
Handheld remote controlYes
Product colorBlack
Audio amplifierYes
Sleep timerYes
Volume controlRotary
Apple docking compatibility-
Surround modes quantity12
AirPlayYes
Quantity1
Sample rate24 kHz
Auto standbyYes
Yes
Power
AC input voltage220-230 V
AC input frequency50 - 60 Hz
Power consumption (typical)550 W
Power consumption (standby)0.1 W
Weight & dimensions
Width435 mm
Depth362.5 mm
Height168 mm
Weight9800 g
Other features
Compatible operating systemsWindows 8.1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-924 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-924?

The Pioneer VSX-924 has a weight of 9800 g.

What is the height of the Pioneer VSX-924?

The Pioneer VSX-924 has a height of 168 mm.

What is the width of the Pioneer VSX-924?

The Pioneer VSX-924 has a width of 435 mm.

What is the depth of the Pioneer VSX-924?

The Pioneer VSX-924 has a depth of 362.5 mm.

How do I connect my speakers to the Pioneer VSX-924 receiver?

Make sure to use the appropriate speaker cables and connect them to the corresponding speaker terminals on the back of the receiver, ensuring a secure connection.

What is the optimal placement for my receiver in my entertainment setup?

It is recommended to place the Pioneer VSX-924 receiver in a well-ventilated area with ample space around it to avoid overheating. Avoid placing it in enclosed spaces or near heat-emitting devices.

How can I adjust the audio settings on the receiver to enhance my listening experience?

Navigate to the audio settings menu on the receiver's interface, where you can fine-tune various parameters such as equalizer settings, sound mode selection, dialogue enhancement, and bass/treble adjustments to suit your preferences.

How can I connect my external devices (e.g., DVD player, gaming console) to the receiver?

Utilize the available HDMI, optical, or coaxial inputs on the Pioneer VSX-924 receiver to connect your external devices. Ensure that the input source on the receiver matches the corresponding input you are using for your device.

Can I set up a multi-room audio system with the Pioneer VSX-924 receiver?

Yes, the receiver supports multi-room audio functionality. Refer to the receiver's menu options to configure the multi-room settings, allowing you to play audio in different rooms simultaneously or independently using compatible speakers.

How many audio output channels does the Pioneer VSX-924 have?

The Pioneer VSX-924 has 7.2 audio output channels. This means it can support a surround sound setup with multiple speakers, providing an immersive audio experience for the user.

What is the Total Harmonic Distortion (THD) of the Pioneer VSX-924?

The THD of the Pioneer VSX-924 is 1%. This indicates that the receiver produces relatively low distortion in the audio output, resulting in cleaner and more accurate sound reproduction.

What is the input sensitivity of the Pioneer VSX-924?

The input sensitivity of the Pioneer VSX-924 is 315 mV. This means it requires a moderate input signal level to produce an optimal audio output.

Does the Pioneer VSX-924 have pre-out connectivity?

Yes, the Pioneer VSX-924 has pre-out connectivity. This allows users to connect additional power amplifiers or subwoofers, enabling greater flexibility in their audio setup.

How many HDMI inputs does the Pioneer VSX-924 have?

The Pioneer VSX-924 has 7 HDMI inputs. This is a generous amount of HDMI inputs, allowing users to connect multiple devices such as gaming consoles, media players, and Blu-ray players easily.

Is the manual of the Pioneer VSX-924 available in English?

Yes, the manual of the Pioneer VSX-924 is available in English .

Is your question not listed? Ask your question here

No results