Pioneer VSX-921-K manual

Pioneer VSX-921-K
8.9 · 13
PDF manual
 · 104 pages
English
manualPioneer VSX-921-K
24
Es
03
03
7
Espere hasta que finalicen los tonos de prueba.
Mientras el reproductor emite los tonos de prueba, en la
pantalla aparece un informe de progreso para determinar los
altavoces presentes en su sistema. Intente hacer el menor
ruido posible mientras se lleva a cabo.
• Para conseguir unos ajustes de altavoz correctos, no
modifique el volumen durante los tonos de prueba.
8
Confirme la configuración del altavoz.
La configuración que aparece en pantalla deberá reflejar los
altavoces reales de los que dispone.
• Si aparecen mensajes de error (como Too much
ambient noise (Demasiado ruido ambiental)),
seleccione RETRY después de solucionar el ruido
ambiental (consulte más abajo Otros problemas al utilizar
la configuración automática MCACC).
Si la configuración del altavoz que aparece en pantalla no es
correcta, utilice / para seleccionar el altavoz y / para
cambiar el ajuste. Cuando termine, vaya al paso siguiente.
Si ve un mensaje de error (ERR) en la columna derecha,
puede que haya un problema con la conexión del altavoz. Si
al seleccionar RETRY no se soluciona el problema,
desconecte la alimentación y compruebe las conexiones del
altavoz.
9
Asegúrese de que la opción ‘OK’ esté seleccionada;
luego, pulse ENTER.
Si no toca la pantalla del paso 7 durante 10 segundos ni pulsa
el botón ENTER en el paso 8, los ajustes de MCACC
empezarán automáticamente, tal como se muestra más
abajo.
Se muestra un informe de progreso en la pantalla mientras
el receptor emite más tonos de prueba para determinar los
ajustes óptimos del receptor para el nivel de canal, la
distancia de los altavoces y la EC de calibración acústica.
Una vez más, intente hacer el menor ruido posible mientras
esto se lleva a cabo. Puede tardar de 1 a 3 minutos.
10
La configuración Auto MCACC ha concluido. Volverá al
menú System Setup.
Los ajustes aplicados en la configuración automática
MCACC deberían ofrecerle un excelente sonido envolvente
de su sistema, pero también es posible ajustar esta
configuración manualmente mediante el menú System
Setup (a partir de la página 37).
Nota
• Dependiendo de las características de la habitación, el
uso de altavoces idénticos, con conos de
aproximadamente 12 cm, puede en algunas ocasiones
producir ajustes de tamaño diferentes. Puede corregir
manualmente el ajuste mediante Ajuste de los altavoces
en la página 37.
El ajuste de distancia del subwoofer puede ser mayor que
la distancia real que hay desde la posición de audición.
Este ajuste debería ser preciso (tomando en
consideración el retardo y las características de la
habitación); generalmente no es necesario cambiarlo.

Otros problemas al utilizar la configuración

automática MCACC

Si el entorno de la sala no es el óptimo para la configuración
automática MCACC (si hay demasiado ruido de fondo, ecos
producidos por las paredes, obstáculos entre los altavoces y
el micrófono), los ajustes resultantes pueden ser incorrectos.
Compruebe si algún electrodoméstico (aire acondicionado,
nevera, ventilador, etc.) puede estar afectando al ambiente y,
en caso necesario, apáguelo. Si aparecen instrucciones en la
pantalla del panel frontal, asegúrese de seguirlas.
Algunos televisores más antiguos pueden interferir en el
funcionamiento del micrófono. Si parece que ese es el
caso, apague el televisor mientras se ejecuta la
configuración automática MCACC.
1.Auto MCACC
Now Analyzing
Environment Check
Ambient Noise
Speaker YES/NO
Return
1.Auto MCACC
Check!
OK
Return
10:Next
Front
Center
Surr
Surr. Back
Subwoofer
[ YES ]
[ YES ]
[ YES ]
[YESx2]
[ YES ]
1.Auto MCACC
Now Analyzing
Surround Analyzing
Speaker System
Speaker Distance
Channel Level
Acoustic Cal EQ
Return
VSX-921_UCSMXCN_Es.book 24 ページ 󲃟󲃝󲃞󲃞年󲃞月6日 木曜日 午後4時󲃞󲃟分

View the manual for the Pioneer VSX-921-K here, for free. This manual comes under the category receivers and has been rated by 13 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-921-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
M
Maria November 24, 2022

I receive error message UE22 and I would need help to get the latest update.

I receive error message UE22 and I would need help to get the latest update.
zoom-in
View photo
This message has been automatically translated
G
GeorgeFebruary 14, 2023

Hello, I have a Pioneer VSX-921-K receiver and it goes into Advanced Protection Mode. The red light comes on and then goes off. What happens when it does this? Can anything be done? Thank you.

Hello, I have a Pioneer VSX-921-K receiver and it goes into Advanced Protection Mode. The red light comes on and then goes of...
zoom-in
View photo
This message has been automatically translated
F
FarokhSeptember 6, 2022

How much watt is out put pioneer vsx 921

F
FarokhSeptember 6, 2022

How much watt is the pioneer vsx 921

The Pioneer VSX-921-K is a receiver that offers various features for audio enthusiasts. With a signal-to-noise ratio of 98 dB, it ensures a clean and distortion-free audio output. The impedance of 16 Ω allows for compatibility with a wide range of speakers. Featuring 7.1 channels, the VSX-921-K provides immersive surround sound capabilities. It also offers multiple multichannel audio input and output terminals, allowing for seamless connectivity with other compatible devices. With two digital audio optical inputs and one digital audio coaxial input, users can connect their audio sources with ease. The receiver includes two component video inputs and four HDMI inputs, providing flexibility and versatility when connecting video devices such as game consoles, Blu-ray players, or set-top boxes. It also features one USB port, allowing users to connect external devices for media playback. In terms of connectivity options, the VSX-921-K offers one composite video input and one HDMI output. This allows users to connect their display devices, such as televisions or projectors, easily. Additionally, it provides one composite video output for added convenience. With its specifications and multiple input and output options, the Pioneer VSX-921-K is a versatile receiver that aims to provide high-quality audio and video performance. Its diverse range of connectivity options and multi-channel audio capabilities make it suitable for various home entertainment setups.

General
BrandPioneer
ModelVSX-921-K | VSX-921-K
Productreceiver
EAN0884938133159, 4988028133251
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Audio decodersDolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:6, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Sleep timerYes
On Screen Display (OSD)Yes
Apple docking compatibilityiPad, iPhone, iPod
AirPlayYes
Audio
Signal-to-Noise Ratio (SNR)98 dB
Audio D/A Converter (DAC)24-bit/192kHz
Impedance16 Ω
Audio output channels7.1 channels
Power output per channel (20-20KHz@8 Ohm)80 W
Power output per channel (1KHz@8 Ohm)110 W
Power output per channel (1KHz@6 Ohm)125 W
Audio A/D Converter (ADC)24-bit/96kHz
Receiver typeSurround
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
USB ports quantity1
Composite video in1
Ethernet LAN (RJ-45) ports1
Outputs
Multichannel audio output typeTerminals
Number of HDMI outputs1
Composite video out1
Headphone outputs7
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
Network
BluetoothYes
Ethernet LANYes
Wi-FiNo
File formats
Audio formats supportedAAC, MP3, WMA
Video formats supportedMPEG4
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9600 g
Width435 mm
Depth362.5 mm
Height168 mm
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)500 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integratedNo
Packaging content
ManualYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-921-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a weight of 9600 g.

What is the height of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a height of 168 mm.

What is the width of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a width of 435 mm.

What is the depth of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a depth of 362.5 mm.

How can I connect my TV to the Pioneer VSX-921-K receiver?

To connect your TV to the receiver, use an HDMI cable. Connect one end to the HDMI output port of your TV and the other end to the HDMI input port labeled "BD/DVD" on the back of the receiver.

What is the recommended volume level for optimal audio performance?

For optimal audio performance, it is recommended to set the volume level to around two-thirds or 60-70% of the maximum volume. However, the actual volume level may vary depending on your personal preference and the content you are listening to.

How can I set up the automatic speaker calibration feature?

To set up the automatic speaker calibration feature, press the "Auto MCACC" button on the remote control. Make sure all the speakers are connected properly and the microphone is placed at your listening position. Follow the on-screen prompts to complete the calibration process.

Can I connect my mobile device wirelessly to the receiver?

Yes, you can connect your mobile device wirelessly to the Pioneer VSX-921-K receiver using the built-in Bluetooth feature. Enable Bluetooth on your device and select the receiver from the list of available devices. Follow the pairing instructions to establish the connection.

How do I adjust the bass and treble levels on the receiver?

To adjust the bass and treble levels, press the "Tone" button on the remote control. Use the navigation buttons to select either "Bass" or "Treble" and then use the volume control dial to increase or decrease the level. Press the "Tone" button again to exit the tone control mode.

What is the Signal-to-Noise Ratio (SNR) of the Pioneer VSX-921-K?

The Signal-to-Noise Ratio (SNR) of the Pioneer VSX-921-K is 98 dB. This is a high SNR, indicating that the receiver is capable of producing a clear and detailed sound with minimal background noise.

What is the impedance of the Pioneer VSX-921-K?

The impedance of the Pioneer VSX-921-K is 16 Ω. This means that it can handle speakers with an impedance of 16 Ω, providing a compatible and efficient audio output.

How many audio output channels does the Pioneer VSX-921-K have?

The Pioneer VSX-921-K has 7.1 channels of audio output. This allows for immersive surround sound, making it ideal for home theater setups.

What types of audio input does the Pioneer VSX-921-K support?

The Pioneer VSX-921-K supports both digital audio optical in and digital audio coaxial in. This versatility allows for easy connectivity with various audio sources, such as TVs, gaming consoles, and Blu-ray players.

Does the Pioneer VSX-921-K have Bluetooth connectivity?

Yes, the Pioneer VSX-921-K has Bluetooth connectivity. This allows users to wirelessly stream audio from their smartphones, tablets, or other devices, enhancing convenience and flexibility in audio playback.

Is the manual of the Pioneer VSX-921-K available in English?

Yes, the manual of the Pioneer VSX-921-K is available in English .

Is your question not listed? Ask your question here

No results