Pioneer VSX-921-K manual

Pioneer VSX-921-K
8.9 · 13
PDF manual
 · 104 pages
English
manualPioneer VSX-921-K
2
En
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended toalert the user to the presence of uninsulated“dangerous voltage” within the product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock to persons.CAUTION:TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

IMPORTANT

D3-4-2-1-1_A1_En
NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
Information to UserAlterations or modifications carried out without appropriate authorization may invalidate the user’s right to operatethe equipment. D8-10-2_A1_En
WARNING
This equipment is not waterproof. To prevent a fire orshock hazard, do not place any container filled withliquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain ormoisture. D3-4-2-1-3_A1_En
WARNING
Before plugging in for the first time, read the followingsection carefully.The voltage of the available power supply differsaccording to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230 V or 120 V) written on the rear panel.D3-4-2-1-4*_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 40 cm at top, 20 cm at rear, and 20 cm at eachside).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product,and to protect it from overheating. To prevent firehazard, the openings should never be blocked orcovered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpetor a bed.D3-4-2-1-7b*_A1_En
WARNING
T
o prevent a fire hazard, do not place any naked flamesources (such as a lighted candle) on the equipment.D3-4-2-1-7a_A1_En
Operating EnvironmentOperating environment temperature and humidity:+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked)Do not install this unit in a poorly ventilated area, or inlocations exposed to high humidity or direct sunlight (or strong artificial light) D3-4-2-1-7c*_A1_En
CautionTo prevent fire hazard, the Class 2 Wiring Cable should be used for connection with speaker, and should be routed away from hazards to avoid damageto the insulation of the cable.D3-7-13-67*_A1_En
VSX-921_UCSMXCN_En.book 2 ページ 󲃟󲃝󲃞󲃞年󲃞月6日 木曜日 午後4時󲃠4分

View the manual for the Pioneer VSX-921-K here, for free. This manual comes under the category receivers and has been rated by 13 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-921-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
M
Maria November 24, 2022

I receive error message UE22 and I would need help to get the latest update.

I receive error message UE22 and I would need help to get the latest update.
zoom-in
View photo
This message has been automatically translated
G
GeorgeFebruary 14, 2023

Hello, I have a Pioneer VSX-921-K receiver and it goes into Advanced Protection Mode. The red light comes on and then goes off. What happens when it does this? Can anything be done? Thank you.

Hello, I have a Pioneer VSX-921-K receiver and it goes into Advanced Protection Mode. The red light comes on and then goes of...
zoom-in
View photo
This message has been automatically translated
F
FarokhSeptember 6, 2022

How much watt is out put pioneer vsx 921

F
FarokhSeptember 6, 2022

How much watt is the pioneer vsx 921

The Pioneer VSX-921-K is a receiver that offers various features for audio enthusiasts. With a signal-to-noise ratio of 98 dB, it ensures a clean and distortion-free audio output. The impedance of 16 Ω allows for compatibility with a wide range of speakers. Featuring 7.1 channels, the VSX-921-K provides immersive surround sound capabilities. It also offers multiple multichannel audio input and output terminals, allowing for seamless connectivity with other compatible devices. With two digital audio optical inputs and one digital audio coaxial input, users can connect their audio sources with ease. The receiver includes two component video inputs and four HDMI inputs, providing flexibility and versatility when connecting video devices such as game consoles, Blu-ray players, or set-top boxes. It also features one USB port, allowing users to connect external devices for media playback. In terms of connectivity options, the VSX-921-K offers one composite video input and one HDMI output. This allows users to connect their display devices, such as televisions or projectors, easily. Additionally, it provides one composite video output for added convenience. With its specifications and multiple input and output options, the Pioneer VSX-921-K is a versatile receiver that aims to provide high-quality audio and video performance. Its diverse range of connectivity options and multi-channel audio capabilities make it suitable for various home entertainment setups.

General
BrandPioneer
ModelVSX-921-K | VSX-921-K
Productreceiver
EAN0884938133159, 4988028133251
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Audio decodersDolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:6, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Sleep timerYes
On Screen Display (OSD)Yes
Apple docking compatibilityiPad, iPhone, iPod
AirPlayYes
Audio
Signal-to-Noise Ratio (SNR)98 dB
Audio D/A Converter (DAC)24-bit/192kHz
Impedance16 Ω
Audio output channels7.1 channels
Power output per channel (20-20KHz@8 Ohm)80 W
Power output per channel (1KHz@8 Ohm)110 W
Power output per channel (1KHz@6 Ohm)125 W
Audio A/D Converter (ADC)24-bit/96kHz
Receiver typeSurround
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
USB ports quantity1
Composite video in1
Ethernet LAN (RJ-45) ports1
Outputs
Multichannel audio output typeTerminals
Number of HDMI outputs1
Composite video out1
Headphone outputs7
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
Network
BluetoothYes
Ethernet LANYes
Wi-FiNo
File formats
Audio formats supportedAAC, MP3, WMA
Video formats supportedMPEG4
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9600 g
Width435 mm
Depth362.5 mm
Height168 mm
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)500 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integratedNo
Packaging content
ManualYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-921-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a weight of 9600 g.

What is the height of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a height of 168 mm.

What is the width of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a width of 435 mm.

What is the depth of the Pioneer VSX-921-K?

The Pioneer VSX-921-K has a depth of 362.5 mm.

How can I connect my TV to the Pioneer VSX-921-K receiver?

To connect your TV to the receiver, use an HDMI cable. Connect one end to the HDMI output port of your TV and the other end to the HDMI input port labeled "BD/DVD" on the back of the receiver.

What is the recommended volume level for optimal audio performance?

For optimal audio performance, it is recommended to set the volume level to around two-thirds or 60-70% of the maximum volume. However, the actual volume level may vary depending on your personal preference and the content you are listening to.

How can I set up the automatic speaker calibration feature?

To set up the automatic speaker calibration feature, press the "Auto MCACC" button on the remote control. Make sure all the speakers are connected properly and the microphone is placed at your listening position. Follow the on-screen prompts to complete the calibration process.

Can I connect my mobile device wirelessly to the receiver?

Yes, you can connect your mobile device wirelessly to the Pioneer VSX-921-K receiver using the built-in Bluetooth feature. Enable Bluetooth on your device and select the receiver from the list of available devices. Follow the pairing instructions to establish the connection.

How do I adjust the bass and treble levels on the receiver?

To adjust the bass and treble levels, press the "Tone" button on the remote control. Use the navigation buttons to select either "Bass" or "Treble" and then use the volume control dial to increase or decrease the level. Press the "Tone" button again to exit the tone control mode.

What is the Signal-to-Noise Ratio (SNR) of the Pioneer VSX-921-K?

The Signal-to-Noise Ratio (SNR) of the Pioneer VSX-921-K is 98 dB. This is a high SNR, indicating that the receiver is capable of producing a clear and detailed sound with minimal background noise.

What is the impedance of the Pioneer VSX-921-K?

The impedance of the Pioneer VSX-921-K is 16 Ω. This means that it can handle speakers with an impedance of 16 Ω, providing a compatible and efficient audio output.

How many audio output channels does the Pioneer VSX-921-K have?

The Pioneer VSX-921-K has 7.1 channels of audio output. This allows for immersive surround sound, making it ideal for home theater setups.

What types of audio input does the Pioneer VSX-921-K support?

The Pioneer VSX-921-K supports both digital audio optical in and digital audio coaxial in. This versatility allows for easy connectivity with various audio sources, such as TVs, gaming consoles, and Blu-ray players.

Does the Pioneer VSX-921-K have Bluetooth connectivity?

Yes, the Pioneer VSX-921-K has Bluetooth connectivity. This allows users to wirelessly stream audio from their smartphones, tablets, or other devices, enhancing convenience and flexibility in audio playback.

Is the manual of the Pioneer VSX-921-K available in English?

Yes, the manual of the Pioneer VSX-921-K is available in English .

Is your question not listed? Ask your question here

No results