Pioneer VSX-919AH-K manual

Pioneer VSX-919AH-K
8.8 · 10
PDF manual
 · 128 pages
English
manualPioneer VSX-919AH-K

AUDIO/VIDEO MULTI-CHANNEL

RECEIVER

VSX-1019AH-K

VSX-919AH-K

·
Protect your new investment
The details of your purchase will be on file for reference in the event of an
insurance claim such as loss or theft.
·
Improve product development
Your input helps us continue to design products that meet your needs.
·
Receive a free Pioneer newsletter
Registered customers can opt in to receive a monthly newsletter.
·
Receive free tips, updates and service bulletins on
your new product

Operating Instructions

Register your product at
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
VSX-1019_KU.book 1 ページ 2009年2月17日 火曜日 午前11時56分

View the manual for the Pioneer VSX-919AH-K here, for free. This manual comes under the category receivers and has been rated by 10 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-919AH-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
J
Jim burkardJanuary 28, 2023

I have a VSX -919AH pioneer audio/visual multi Chanel receiver I purchased over 20 years ago. I’m looking for the specs or Manuel on the receiver.

I have a VSX -919AH pioneer audio/visual multi Chanel receiver I   purchased over 20 years ago. I’m looking for the specs or ...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

The Pioneer VSX-919AH-K audio/visual multi-channel receiver has the following specifications: Amplifier section: - Continuous average power output of 90 watts per channel, minimum, at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.2% total harmonic distortion. - Front (stereo): 90 W + 90 W - Power output (1 kHz, 6 Ω, 0.05%, 1 ch driven): 120 W per channel - Guaranteed speaker impedance: 16 Ω to 8 Ω, less than 8 Ω to 6 Ω (setting required) Audio Section: - Input (Sensitivity/Impedance): LINE - 284 mV/47 kΩ - Output (Level/Impedance): REC - 284 mV/2.2 kΩ - Signal-to-Noise Ratio (IHF, short-circuited, A network): LINE - 100 dB - Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]: LINE - 81 dB Tuner Section: - Frequency Range (FM): 87.5 MHz to 108 MHz - Antenna Input (FM): 75 Ω unbalanced - Frequency Range (AM): 530 kHz to 1700 kHz - Antenna (AM): Loop antenna (balanced) Video Section: - Signal level: Composite - 1 V peak-to-peak (75 Ω), Component Video - Y: 1.0 V peak-to-peak (75 Ω), PB, PR: 0.7 V peak-to-peak (75 Ω) - Corresponding maximum resolution: Component Video - 1080p (1125p) (Video convert off) Digital In/Out Section: - HDMI terminal: 19-pin (Not DVI) - HDMI output type: 5 V, 100 mA - USB terminal: USB2.0 Full Speed (Type A) - iPod terminal: USB, and Video (Composite) - SIRIUS antenna cable: 8-pin mini DIN cable Integrated control section: - Control (SR) terminal: Ø 3.5 Mini-jack (MONO) - Control (IR) terminal: Ø 3.5 Mini-jack (MONO) - IR signal: High Active (High Level: 2.0 V) Miscellaneous: - Power requirements: AC 120 V, 60 Hz - Power consumption: 350 W - In standby: 0.5 W (KURO LINK OFF), 0.8 W (KURO LINK ON) - Dimensions: 420 mm (W) x 158 mm (H) x 348.6 mm (D) (16 9/16 in. (W) x 6 1/4 in. (H) x 13 3/4 in. (D)) - Weight (without package): 8.7 kg (19 lb 3 oz)

This answer is automatically generated

The Pioneer VSX-919AH-K is an audio receiver that offers a range of features for an enhanced listening experience. With a signal-to-noise ratio of 100 dB, it delivers clear and high-quality sound with minimal distortion. It has an impedance of 6 Ω, allowing it to efficiently drive a variety of speakers. Featuring 7.1 audio output channels, this receiver is capable of creating a surround sound system for immersive audio playback. It has an output power of 140 W, providing ample power for a satisfying listening experience. Connectivity is made easy with wired technology, allowing seamless integration with various audio devices. The receiver includes a headphone output, enabling private listening. The Pioneer VSX-919AH-K comes with a remote control, providing convenient access to its functions from a distance. Its frequency band ranges from 0.005 to 100 GHz, ensuring support for a wide range of audio frequencies. In terms of dimensions, the receiver measures 420 x 349 x 158 mm (width x depth x height) and weighs 8700 g, making it compact and lightweight. It operates on a power supply of 220-230 V, 50/60 Hz, with a typical power consumption of 290 W and a standby power consumption of 0.5 W. Overall, the Pioneer VSX-919AH-K offers a range of features and connectivity options, making it a versatile and capable audio receiver. Its reliable performance, ample power, and convenient remote control make it well-suited for various audio setups.

General
BrandPioneer
ModelVSX-919AH-K | VSX-919H-K
Productreceiver
EAN4977729954685
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Signal-to-Noise Ratio (SNR)100 dB
Impedance6 Ω
Audio output channels7.1 channels
Other features
Output power140 W
Frequency band0.005 — 100 GHz
Dimensions (WxDxH)420 x 349 x 158 mm
Power requirements220 — 230 V, 50/60 Hz
Ports & interfaces
Connectivity technologyWired
Outputs
Headphone outputs1
Technical details
Handheld remote controlYes
Product colorBlack
Weight & dimensions
Weight8700 g
Power
Power consumption (typical)290 W
Power consumption (standby)0.5 W
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-919AH-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-919AH-K?

The Pioneer VSX-919AH-K has a weight of 8700 g.

How do I properly connect my speakers to the receiver?

Make sure to connect the positive and negative terminals of each speaker to the corresponding speaker outputs on the receiver. This ensures proper sound reproduction and prevents any phase or impedance issues.

What is the maximum power output of the receiver?

The Pioneer VSX-919AH-K receiver has a maximum power output of 120 Watts per channel. This allows for a rich and immersive audio experience, especially when paired with high-quality speakers.

How can I set up my receiver to work with my TV?

Connect an HDMI cable from the HDMI output of your TV to the HDMI input on the receiver. Then, select the appropriate HDMI input on your receiver, ensuring both video and audio signals are seamlessly transmitted through the system.

Why am I not getting any sound from my speakers?

Check that the speaker wires are properly connected to both the receiver and the speakers themselves. Additionally, make sure the speaker output settings are correctly configured in the receiver's setup menu. If all else fails, check the speaker volume levels and ensure they are not set too low or muted.

How do I calibrate my speakers for optimal audio performance?

The Pioneer VSX-919AH-K receiver features an automatic speaker calibration system called MCACC (Multi-Channel Acoustic Calibration System). Follow the on-screen instructions and use the supplied microphone to measure the acoustic characteristics of your listening environment. This process will adjust the speaker levels and optimize the sound quality based on your specific room setup.

What is the Signal-to-Noise Ratio of the Pioneer VSX-919AH-K?

The Signal-to-Noise Ratio of the Pioneer VSX-919AH-K is 100 dB. This means that it has a high quality signal output with minimal background noise, offering a clear and immersive audio experience for the user.

What is the impedance of the Pioneer VSX-919AH-K?

The impedance of the Pioneer VSX-919AH-K is 6 Ω. This means that it is compatible with speakers that have a nominal impedance of 6 Ω, providing a reliable and efficient power transfer between the receiver and the speakers.

How many audio output channels does the Pioneer VSX-919AH-K have?

The Pioneer VSX-919AH-K has 7.1 audio output channels. This means that it supports surround sound systems with up to 7 speakers and 1 subwoofer, providing an immersive audio experience for the user.

What is the output power of the Pioneer VSX-919AH-K?

The output power of the Pioneer VSX-919AH-K is 140 W. This means that it can deliver a significant amount of power to the connected speakers, allowing for loud and dynamic audio playback.

Does the Pioneer VSX-919AH-K come with a remote control?

Yes, the Pioneer VSX-919AH-K comes with a remote control. This allows for convenient and user-friendly operation of the receiver from a distance, enhancing the overall user experience.

Is the manual of the Pioneer VSX-919AH-K available in English?

Yes, the manual of the Pioneer VSX-919AH-K is available in English .

Is your question not listed? Ask your question here

No results