View the manual for the Pioneer VSX-831-B SD2 here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-831-B SD2 or do you need help? Ask your question here





| Brand | Pioneer |
| Model | VSX-831-B SD2 | VSX-831-S |
| Product | receiver |
| EAN | 4573211150407, 889951000044, 4573211150414 |
| Language | English |
| Filetype | User manual (PDF) |
| Audio output channels | 5.1 channels |
| Power output per channel (20-20KHz@8 Ohm) | 80 W |
| Receiver type | Surround |
| Power output per channel (1KHz@6 Ohm) | 130 W |
| Total Harmonic Distortion (THD) | 1 % |
| Audio D/A Converter (DAC) | 32-bit/384kHz |
| Frequency range | 20 - 20000 Hz |
| Output impedance | 6 - 16 Ω |
| HDMI in | 6 |
| Composite video in | 2 |
| Digital audio optical in | 1 |
| Digital audio coaxial in | 1 |
| Remote (IR) input | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio (L/R) in | 3 |
| USB ports quantity | 1 |
| Line-in | Yes |
| PC Audio in | Yes |
| Multichannel audio input type | RCA |
| Number of HDMI outputs | 1 |
| Headphone connectivity | 3.5 mm |
| Headphone outputs | 1 |
| Audio (L/R) out | 5 |
| Line-out | Yes |
| Speakers connectivity type | RCA |
| Connectivity technology | Wired & Wireless |
| Multichannel pre out connectivity | RCA |
| Phono inputs (RCA) | 2 |
| AM antenna ports quantity | 1 |
| Ethernet LAN | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Bluetooth version | 4.1 |
| Bluetooth profiles | A2DP, AVRCP |
| Audio formats supported | AIFF, ALAC, FLAC, WAV |
| Supported radio bands | - |
| Internet radio | Yes |
| Internet radio services supported | TuneIn |
| Radio Data System (RDS) | Yes |
| Auto digital tuning | Yes |
| Preset stations quantity | 40 |
| Optical drive included | No |
| Card reader integrated | No |
| 3D | Yes |
| Supported video modes | 1080p, 2160p |
| Display | - |
| Audio decoders | DTS 96/24, DTS Neo:6, DTS-HD HR, DTS-HD Master Audio, Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD |
| Audio Return Channel (ARC) | Yes |
| Volume control | Rotary |
| Color depth | 36 bit |
| Detachable power cord | No |
| Near Field Communication (NFC) | No |
| Handheld remote control | Yes |
| Product color | Silver |
| Apple docking compatibility | Not supported |
| AirPlay | Yes |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 390 W |
| Power consumption (standby) | 0.15 W |
| Width | 435 mm |
| Depth | 370.5 mm |
| Height | 173 mm |
| Weight | 9200 g |
| Manual | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-831-B SD2 below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
The Pioneer VSX-831-B SD2 has a weight of 9200 g.
The Pioneer VSX-831-B SD2 has a height of 173 mm.
The Pioneer VSX-831-B SD2 has a width of 435 mm.
The Pioneer VSX-831-B SD2 has a depth of 370.5 mm.
The Pioneer VSX-831-B SD2 has 5.1 audio output channels. This means it is capable of delivering surround sound with five main channels and a subwoofer channel.
The power output per channel at 8 Ohm for the Pioneer VSX-831-B SD2 is 80 Watts. This rating indicates that it can provide a decent level of volume and quality for each channel.
The Pioneer VSX-831-B SD2 is a surround receiver. This means it is designed to create an immersive audio experience with multiple audio channels and surround sound decoding capabilities.
The Pioneer VSX-831-B SD2 has 6 HDMI inputs. This allows for easy connectivity of multiple HDMI devices such as gaming consoles, Blu-ray players, and streaming devices.
Yes, the Pioneer VSX-831-B SD2 has 1 USB port. This allows for convenient playback of audio files from USB storage devices.
To troubleshoot audio issues with the Pioneer VSX-831-B SD2 receiver, follow these steps: 1. Check the speaker setup: Ensure that the speaker setup microphone is not still connected. Confirm that the connection between the output jack on the device and the input jack on the receiver is correct. Make sure that none of the connecting cables are bent, twisted, or damaged. 2. Check the mute function: If the MUTE indicator on the display is flashing, press the MUTE button on the remote controller to cancel muting. 3. Check headphone connection: If headphones are connected to the PHONES jack, no sound will be output from the speakers. Disconnect the headphones to enable sound output from the speakers. 4. Check audio settings: In the Home Menu, navigate to "System Setup" - "Source" - "Audio Select" - "Fixed PCM." If it is set to "On," no sound will be played when signals other than PCM are input. Change the setting to "Off." 5. Check TV audio: If there is no sound from the TV, change the input selector on the receiver to the position of the terminal to which the TV is connected. If the TV doesn't support the ARC function, connect the TV and the receiver using a digital optical cable, digital coaxial cable, or analog audio cable. If the above steps do not resolve the audio issues, refer to the Troubleshooting section in the Pioneer VSX-831-B SD2 receiver manual for further assistance.
If there is no video output when using HDMI connections with the Pioneer VSX-831-B SD2 receiver, follow these steps to troubleshoot the issue: 1. Check HDMI connections: Ensure that the HDMI cables are securely connected to both the receiver and the TV or display device. Make sure that the HDMI input on the TV or display device is set to the correct HDMI input source. 2. Check HDMI settings: In the Home Menu, navigate to "System Setup" - "HDMI Setup" - "HDMI Control" - "HDMI Standby Through." If this setting is set to "On," the HDMI output may not work when the receiver is in standby mode. Change the setting to "Off." 3. Check HDMI compatibility: Verify that the HDMI cables and devices connected to the receiver are compatible with the HDMI version supported by the Pioneer VSX-831-B SD2 receiver. Some older HDMI cables or devices may not be compatible with newer HDMI versions. 4. Check video resolution settings: In the Home Menu, navigate to "System Setup" - "Video" - "HDMI Output" - "Resolution." Ensure that the video resolution is set to a compatible resolution supported by the TV or display device. 5. Check HDCP compatibility: If the TV or display device does not support HDCP (High-bandwidth Digital Content Protection), the video output may not work. Try connecting the HDMI cable directly to the TV or display device to bypass the receiver and check if the video output works. If the above steps do not resolve the issue, refer to the Troubleshooting section in the Pioneer VSX-831-B SD2 receiver manual for further assistance.
To resolve issues with the system setup of the Pioneer VSX-831-B SD2 receiver, follow these steps: 1. Power On & Initial Setup: Ensure that all connections are properly made and the TV's input is set to the input for the receiver. Insert batteries in the remote controller and press the power button to turn on the unit. Follow the onscreen guidance for the Initial Setup, which will guide you through the required settings for startup. 2. Full Auto MCACC: Place the supplied speaker setup microphone at ear height in the listening position. Measure the test tones emitted by the speakers, and the unit will automatically set the optimum volume level, crossover frequencies, and distance from the listening position. This calibration corrects distortions caused by the room's acoustic environment. Make sure to keep the room as quiet as possible during the measurement. 3. Restarting the unit: If the unit is operating erratically, you can try restarting it. Turn the unit to standby mode and press the standby/on button on the main unit for at least 5 seconds. If the issue persists, try disconnecting and reconnecting the power cords of the unit and connected equipment. If the above steps do not resolve the system setup issues, refer to the Troubleshooting section in the Pioneer VSX-831-B SD2 receiver manual for further assistance.
To resolve issues with the MCACC calibration system on the Pioneer VSX-831-B SD2 receiver, follow these steps: 1. Ensure proper setup: Place the supplied speaker setup microphone at ear height in the listening position. Connect the microphone to the MCACC SETUP MIC jack on the main unit. 2. Select speaker configuration: Use the on-screen display (OSD) to select the connected speaker configuration. The image on the screen will change as you choose the number of channels in "Speaker Channels." 3. Start calibration: Initiate the Full Auto MCACC calibration by following the on-screen instructions. The receiver will emit test tones at high volume to measure the speakers and automatically set the optimum volume level, crossover frequencies, and distance from the listening position. Keep the room as quiet as possible during the measurement and avoid interruptions. 4. Troubleshooting tips: If the subwoofer sound is not detected during calibration, ensure the subwoofer volume is set to more than halfway. If the measurement is interrupted, turn off household appliances that may cause interference. If the MCACC calibration system still does not work properly, refer to the Troubleshooting section in the Pioneer VSX-831-B SD2 receiver manual for further assistance.
To troubleshoot network or Bluetooth connectivity problems with the Pioneer VSX-831-B SD2 receiver, follow these steps: 1. Network Setup: a. Press the "Home" button on the remote controller and select "Network/Bluetooth" from the on-screen display. b. Ensure that the Wi-Fi or wired LAN connection is properly configured. If using Wi-Fi, select the appropriate network and enter the password if required. c. Check the Wi-Fi status to ensure a stable connection. Verify the SSID, signal strength, and status of the connected access point. 2. Bluetooth Setup: a. Press the "Home" button on the remote controller and select "Network/Bluetooth" from the on-screen display. b. Make sure the Bluetooth function is enabled on both the receiver and the Bluetooth-enabled device. c. If the connection fails, try power cycling both the receiver and the Bluetooth device. Also, ensure that the Bluetooth device is within range and not obstructed by any obstacles. 3. Troubleshooting Tips: a. If the network connection is unstable, check the router settings and try restarting the router. b. For Bluetooth connectivity issues, check if the Bluetooth device supports the A2DP profile and ensure that the volume is not set too low on the device. c. Avoid interference from other devices operating in the 2.4 GHz range, such as microwave ovens or cordless phones. d. If the audio quality is poor, try moving the Bluetooth device closer to the receiver or removing any obstacles between them. If the above steps do not resolve the network or Bluetooth connectivity problems, refer to the Troubleshooting section in the Pioneer VSX-831-B SD2 receiver manual for further assistance.
Yes, the manual of the Pioneer VSX-831-B SD2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 1I can't find an instruction manual online beyond the Basic Manual offered. I need to know how to operate this machine, such as AM/FM tuning, establishing presets, operating the internet radio, tone controls, inputs, EVERYTHING! Can you help? Tnx/RSE