Pioneer VSX-830 manual

Pioneer VSX-830
7.8 · 3
PDF manual
 · 142 pages
English
manualPioneer VSX-830
94
Operation of other devices by remote control (excluding VSX-830)
11

Programming signals from other remote controls

If the preset code for your component is not available, or the available preset codes do not operate correctly, you
can program signals from the remote control of another component. This can also be used to program additional
operations (buttons not covered in the presets) after assigning a preset code.
The remote can store about 120 preset codes from other components (this has been tested with codes of Pioneer
format only).
Certain buttons represent operations that cannot be learned from other remote controls. The buttons available
are shown below:
STANDBY/ON
ENTER
SOURCE
INPUT
TV VOL
RECEIVER
ENTER
CLR
CH
CH
2
546
8
0
79
13
Fav
1 Press and hold RCU SETUP, then press ‘2’ for three seconds.
Release the button after the LED flashes once. The LED continues to flash.
! To “learn” codes at the TV buttons, proceed to step 3.
! To cancel the preset setup mode press RCU SETUP.
2 Press the input function button for the component you want to control.
The LED blinks once and flashes continuously.
3 Point the two remote controls towards each other, then press the button that will be
doing the learning on this receiver’s remote control.
The LED flashes once, then stops flashing, remaining lit.
! The remote controls should be 3 cm apart.
3 cm
This receiver’s
remote control
Other remote
control
4 Press the corresponding button on the other remote control that is sending (teaching) the
signal to this receiver’s remote control.
If the LED lights for one second and continues to flash, the setting has been successfully completed.
! If the LED flashes for five seconds, it means the memory is full. See Erasing all learnt settings that are in one
input function on page 95 to erase a programmed button you’re not using to free up more memory (note
that some signals may take more memory than others).
! Note that interference from TVs or other devices will sometimes result in the remote control learning the
wrong signal.
! Some commands from other remote controls cannot be learned, but in most cases the remotes just need to
be moved closer together or farther apart.
5 To program additional signals for the current component repeat steps 3 and 4.
To program signals for another component, exit and repeat steps 2 through 4.
6 Press RCU SETUP to exit the programming mode.

Erasing one of the remote control button settings

This erases one of the buttons you have programmed and restores the button to the factory default.
1 Press and hold RCU SETUP, then press ‘8’ for three seconds.
Release the button after the LED flashes once. The LED continues to flash.
! To erase operations registered at the TV buttons, proceed to step 3.
! To cancel the preset setup mode press RCU SETUP.
2 Press the input function button corresponding to the command to be erased.
The LED flashes once.
3 Press and hold the button to be erased for three seconds.
If the LED lights for one second, the erasing has been successfully completed.
4 Repeat step 3 to erase other buttons.
5 Press RCU SETUP to exit the erasing mode.
 

 

 

 

View the manual for the Pioneer VSX-830 here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-830 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
C
Chris January 22, 2023

How do I configure my receiver with a firestick device? I tried pairing the firestick directly to my tv first but I’m getting no sound just picture. Thanks.

A
Alan December 24, 2023

Model vsx830. FL light is flashing. Can not turn amp on

R
Rose BrooksApril 11, 2024

Will VSX-830 carry two Klipsçh speakers

The Pioneer VSX-830 is a receiver designed for home entertainment systems. It offers a range of features that enhance audio and video experiences. With its sleek design, this receiver adds a touch of modernity to any setup. Equipped with advanced technologies, the Pioneer VSX-830 delivers high-quality sound reproduction. It supports both Dolby TrueHD and DTS-HD Master audio formats, ensuring immersive and accurate audio playback. The receiver also features advanced digital-to-analog conversion, resulting in precise and dynamic sound. In terms of connectivity options, the VSX-830 offers a variety of inputs and outputs. It includes multiple HDMI inputs, allowing seamless connection to various devices such as Blu-ray players, gaming consoles, and set-top boxes. The receiver also supports 4K Ultra HD pass-through, ensuring compatibility with the latest video formats. The VSX-830 supports wireless connectivity through built-in Wi-Fi and Bluetooth. This enables easy streaming and playback from compatible devices, providing convenience and flexibility for users. With its intuitive interface and user-friendly remote control, operating the VSX-830 is straightforward. The receiver also supports smartphone control, allowing users to adjust settings and playback options conveniently. Overall, the Pioneer VSX-830 receiver is a versatile and reliable option for home entertainment enthusiasts. Combining cutting-edge technology with ease of use, this receiver elevates the audio and video experience, making it a worthwhile addition to any home theater setup.

General
BrandPioneer
ModelVSX-830
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-830 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my speakers to the Pioneer VSX-830 receiver?

Ensure that the speaker wires are properly inserted into the corresponding speaker terminals on the back of the receiver, making sure to match the polarity (+ and -).

How can I adjust the audio settings on the Pioneer VSX-830?

Access the on-screen menu, navigate to the "Audio" settings, and you can adjust various parameters including equalizer settings, channel levels, and sound modes.

How do I set up my TV with the Pioneer VSX-830 receiver?

Connect an HDMI cable from the HDMI OUT (ARC) port on the receiver to the HDMI ARC port on your TV. Then, ensure the TV's HDMI ARC setting is enabled, allowing audio to be sent from the TV to the receiver.

What should I do if there is no sound coming out of my speakers connected to the Pioneer VSX-830?

Check that the speaker wires are securely connected and that the speakers are powered on. Additionally, ensure the receiver is not on a muted mode and the correct input source is selected.

How can I optimize the audio performance of the Pioneer VSX-830 for my specific room?

The receiver offers automatic speaker calibration called "MCACC." Activate this feature, place the included microphone in your seating position, and follow the on-screen instructions to allow the receiver to analyze your room and automatically adjust the audio settings accordingly.

Is the manual of the Pioneer VSX-830 available in English?

Yes, the manual of the Pioneer VSX-830 is available in English .

Is your question not listed? Ask your question here

No results