Pioneer VSX-830 manual

Pioneer VSX-830
7.8 · 3
PDF manual
 · 142 pages
English
manualPioneer VSX-830
93
Operation of other devices by remote control (excluding VSX-830)
11

About the Remote Setup menu

The Remote Setup mode is set by pressing the number button while pressing RCU SETUP. The different items
on the Remote Setup menu are described below. For their setting procedures, refer to the explanations for the
respective items.
Setting What it does
Change RC
mode
If you have multiple Pioneer receivers, amplifiers, etc., this setting can be used to prevent other units from
operating simultaneously when the remote control unit is operated. See Operating multiple receivers on
page 93 .
Preset recall
Preset codes can be set for the various input functions. The remote control codes of a number of other
devices (including products of other brands) are preset in the remote control to allow these devices to be
operated. See Selecting preset codes directly on page 93 .
Code learning
If the desired operations cannot be performed even though you have set the preset codes, the remote control
signals of other devices can be learned directly. See Programming signals from other remote controls on
page 94 .
Erase learning
This function is used to erase remote control codes that have been learned. Codes learned for the different
input functions can be erased individually. See Erasing one of the remote control button settings on page
94 .
Reset function
This is a function for resetting preset codes that have been set. Key resetting can be done for individual input
functions. See Erasing all learnt settings that are in one input function on page 95 .
Operation
mode switching
time
You can set to automatically switch to AV amplifier operation mode when a certain period of time elapses
after remote operation of each input function is finished. See Setting the switching time for the receiver
operation mode on page 95 .
All reset
This is a function for resetting all remote control unit settings you have made to the defaults set upon ship-
ment from the factory. See Resetting the remote control settings on page 95 .
Notes
! You can cancel or exit any of the steps by pressing RCU SETUP.
! After one minute of inactivity, the remote automatically exits the operation.

Operating multiple receivers

Up to four receivers can be operated discretely using this receiver’s remote control when using multiple receiv-
ers, provided they are of the same model as this receiver. The receiver to be operated is switched by inputting the
preset code to set the remote control setting.
! Set the remote modes on the receivers before using this function (see Remote Control Mode Setup on page
110 ).
1 Press and hold RCU SETUP, then press ‘4’ for three seconds.
Release the button after the LED flashes once. The LED continues to flash.
! To cancel the preset setup mode press RCU SETUP.
2 Press the number button for the receiver (“Receiver 1” to “Receiver 4”) you wish to
operate.
For example, to operate “Receiver 2”, press ‘2’.
If the LED lights for one second, the setting has been successfully completed.
When the preset code is input, the LED flashes three times to indicate that the setting has failed.

Setting the remote to control other components

Most components can be assigned to one of the input function buttons (such as DVD or CD) using the compo-
nent’s manufacturer preset code stored in the remote.
However, there are cases where only certain functions may be controllable after assigning the proper preset
code, or the codes for the manufacturer in the remote control will not work for the model that you are using.
If you can’t find a preset code that matches the component you want to control, you can still teach the remote
individual commands from another remote control (see Programming signals from other remote controls on
page 94 ).
! With the TV buttons, the TV can be operated regardless of the input set for the remote control’s operation
mode. When using one TV set, we recommend assigning the same TV’s preset codes to the TV INPUT button
and the TV button. When using two TV sets, for better convenience assign the TV connected to the MONITOR
OUT terminals to the TV INPUT button, the other TV to the TV button.
! Devices may be assigned to the following input function buttons.
SOURCE CONTROL
STANDBY/ON
DVDBD SAT
HDMI
TV CD
INPUT
ALL

Selecting preset codes directly

1 Press and hold RCU SETUP, then press ‘1’ for three seconds.
Release the button after the LED flashes once. The LED continues to flash.
! To cancel the preset setup mode press RCU SETUP.
2 Press the input function button for the component you want to control.
To assign the preset codes of the TV to be operated with the TV function, press the TV INPUT button.
The LED of the remote control lights.
3 Use the number buttons to enter the 4-digit preset code.
See Preset code list on page 137 .
If the LED lights for one second and continues to flash, the setting has been successfully completed.
When the preset code is fully input, the LED flashes three times to indicate that the setting has failed. If this hap-
pens, enter the 4-digit preset code again.
4 Repeat steps 2 through 3 for the other components you want to control.
To try out the remote control, switch the component on or off (into standby) by pressing u SOURCE. If it doesn’t
seem to work, select the next code from the list (if there is one).
5 Press RCU SETUP to exit the preset setup mode.
 

 

 

 

View the manual for the Pioneer VSX-830 here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-830 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
C
Chris January 22, 2023

How do I configure my receiver with a firestick device? I tried pairing the firestick directly to my tv first but I’m getting no sound just picture. Thanks.

A
Alan December 24, 2023

Model vsx830. FL light is flashing. Can not turn amp on

R
Rose BrooksApril 11, 2024

Will VSX-830 carry two Klipsçh speakers

The Pioneer VSX-830 is a receiver designed for home entertainment systems. It offers a range of features that enhance audio and video experiences. With its sleek design, this receiver adds a touch of modernity to any setup. Equipped with advanced technologies, the Pioneer VSX-830 delivers high-quality sound reproduction. It supports both Dolby TrueHD and DTS-HD Master audio formats, ensuring immersive and accurate audio playback. The receiver also features advanced digital-to-analog conversion, resulting in precise and dynamic sound. In terms of connectivity options, the VSX-830 offers a variety of inputs and outputs. It includes multiple HDMI inputs, allowing seamless connection to various devices such as Blu-ray players, gaming consoles, and set-top boxes. The receiver also supports 4K Ultra HD pass-through, ensuring compatibility with the latest video formats. The VSX-830 supports wireless connectivity through built-in Wi-Fi and Bluetooth. This enables easy streaming and playback from compatible devices, providing convenience and flexibility for users. With its intuitive interface and user-friendly remote control, operating the VSX-830 is straightforward. The receiver also supports smartphone control, allowing users to adjust settings and playback options conveniently. Overall, the Pioneer VSX-830 receiver is a versatile and reliable option for home entertainment enthusiasts. Combining cutting-edge technology with ease of use, this receiver elevates the audio and video experience, making it a worthwhile addition to any home theater setup.

General
BrandPioneer
ModelVSX-830
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-830 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my speakers to the Pioneer VSX-830 receiver?

Ensure that the speaker wires are properly inserted into the corresponding speaker terminals on the back of the receiver, making sure to match the polarity (+ and -).

How can I adjust the audio settings on the Pioneer VSX-830?

Access the on-screen menu, navigate to the "Audio" settings, and you can adjust various parameters including equalizer settings, channel levels, and sound modes.

How do I set up my TV with the Pioneer VSX-830 receiver?

Connect an HDMI cable from the HDMI OUT (ARC) port on the receiver to the HDMI ARC port on your TV. Then, ensure the TV's HDMI ARC setting is enabled, allowing audio to be sent from the TV to the receiver.

What should I do if there is no sound coming out of my speakers connected to the Pioneer VSX-830?

Check that the speaker wires are securely connected and that the speakers are powered on. Additionally, ensure the receiver is not on a muted mode and the correct input source is selected.

How can I optimize the audio performance of the Pioneer VSX-830 for my specific room?

The receiver offers automatic speaker calibration called "MCACC." Activate this feature, place the included microphone in your seating position, and follow the on-screen instructions to allow the receiver to analyze your room and automatically adjust the audio settings accordingly.

Is the manual of the Pioneer VSX-830 available in English?

Yes, the manual of the Pioneer VSX-830 is available in English .

Is your question not listed? Ask your question here

No results