Pioneer VSX-830 manual

Pioneer VSX-830
7.8 · 3
PDF manual
 · 142 pages
English
manualPioneer VSX-830
64
Basic playback
06

Playing a USB device

It is possible to play files using the USB interface on the front of this receiver.
! Compatible USB devices include external magnetic hard drives, portable flash memory drives (particularly key
drives) and digital audio players (MP3 players) of format FAT16/32.
! Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and
assumes no responsibility for any loss of data that may occur when connected to this receiver.
1 Press u STANDBY/ON to switch on the receiver and your TV.
For connection of USB memory, refer to page 34 (VSX-1130/VSX-930) or page 46 (VSX-830).
About one minute is required between turning the power on and completion of startup.
! Make sure the receiver is in standby when disconnecting the USB device.
2 Press iPod USB on the remote control to switch the receiver to the iPod/USB.
When the display shows the names of folders and files, you’re ready to play from the USB device.
Note
If an Over Current message lights in the display, the power requirements of the USB device are too high for this
receiver. Try following the points below:
! Switch the receiver off, then on again.
! Reconnect the USB device with the receiver switched off.
! Use a dedicated AC adapter (supplied with the device) for USB power.
If this doesn’t remedy the problem, it is likely your USB device is incompatible.
Playing back audio files stored on a USB memory device
The maximum number of levels that you can select in Step 2 (below) is 9.
! Note that non-Roman characters in the playlist are displayed as #.
1 Use i/j to select a folder, then press ENTER to browse that folder.
! To return to the previous level any time, press RETURN.
2 Continue browsing until you arrive at what you want to play, then press d to start
playback.
! Copyrighted audio files cannot be played back on this receiver.
! DRM-protected audio files cannot be played back on this receiver.
! On the playback screen, pressing RETURN displays a list screen. To return to the playback screen, press
DISP.
Basic playback controls
This receiver’s remote control buttons can be used for basic playback of files stored on USB memory devices.
! Press iPod USB to switch the remote control to the iPod/USB operation mode.
VSX-1130/VSX-930
TOP
MENU
RETURN
ENTER
HOME
MENU
DISP
VSX-830
Playing back photo files stored on a USB memory device
! Photo files cannot be played in the sub zone.
1 Use i/j to select a folder, then press ENTER to browse that folder.
! For high resolution files, some time may be required for the photo to appear.
! To return to the previous level any time, press RETURN.
2 Continue browsing until you arrive at what you want to play, then press ENTER to start playback.
The selected content is displayed in full screen and a slideshow starts.
Basic playback controls
Button(s) What it does
ENTER, d
Starts displaying a photo and playing a slideshow.
g
Stops the player and returns to the previous menu.
Tip
Slide shows of photo files can be played while listening to music files by returning to the folder/file list display
while playing a music file on a USB device and then playing the photo files. At that time, select music files with a
sampling frequency of 48 kHz or less.
 

 

 

 

View the manual for the Pioneer VSX-830 here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-830 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
C
Chris January 22, 2023

How do I configure my receiver with a firestick device? I tried pairing the firestick directly to my tv first but I’m getting no sound just picture. Thanks.

A
Alan December 24, 2023

Model vsx830. FL light is flashing. Can not turn amp on

R
Rose BrooksApril 11, 2024

Will VSX-830 carry two Klipsçh speakers

The Pioneer VSX-830 is a receiver designed for home entertainment systems. It offers a range of features that enhance audio and video experiences. With its sleek design, this receiver adds a touch of modernity to any setup. Equipped with advanced technologies, the Pioneer VSX-830 delivers high-quality sound reproduction. It supports both Dolby TrueHD and DTS-HD Master audio formats, ensuring immersive and accurate audio playback. The receiver also features advanced digital-to-analog conversion, resulting in precise and dynamic sound. In terms of connectivity options, the VSX-830 offers a variety of inputs and outputs. It includes multiple HDMI inputs, allowing seamless connection to various devices such as Blu-ray players, gaming consoles, and set-top boxes. The receiver also supports 4K Ultra HD pass-through, ensuring compatibility with the latest video formats. The VSX-830 supports wireless connectivity through built-in Wi-Fi and Bluetooth. This enables easy streaming and playback from compatible devices, providing convenience and flexibility for users. With its intuitive interface and user-friendly remote control, operating the VSX-830 is straightforward. The receiver also supports smartphone control, allowing users to adjust settings and playback options conveniently. Overall, the Pioneer VSX-830 receiver is a versatile and reliable option for home entertainment enthusiasts. Combining cutting-edge technology with ease of use, this receiver elevates the audio and video experience, making it a worthwhile addition to any home theater setup.

General
BrandPioneer
ModelVSX-830
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-830 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my speakers to the Pioneer VSX-830 receiver?

Ensure that the speaker wires are properly inserted into the corresponding speaker terminals on the back of the receiver, making sure to match the polarity (+ and -).

How can I adjust the audio settings on the Pioneer VSX-830?

Access the on-screen menu, navigate to the "Audio" settings, and you can adjust various parameters including equalizer settings, channel levels, and sound modes.

How do I set up my TV with the Pioneer VSX-830 receiver?

Connect an HDMI cable from the HDMI OUT (ARC) port on the receiver to the HDMI ARC port on your TV. Then, ensure the TV's HDMI ARC setting is enabled, allowing audio to be sent from the TV to the receiver.

What should I do if there is no sound coming out of my speakers connected to the Pioneer VSX-830?

Check that the speaker wires are securely connected and that the speakers are powered on. Additionally, ensure the receiver is not on a muted mode and the correct input source is selected.

How can I optimize the audio performance of the Pioneer VSX-830 for my specific room?

The receiver offers automatic speaker calibration called "MCACC." Activate this feature, place the included microphone in your seating position, and follow the on-screen instructions to allow the receiver to analyze your room and automatically adjust the audio settings accordingly.

Is the manual of the Pioneer VSX-830 available in English?

Yes, the manual of the Pioneer VSX-830 is available in English .

Is your question not listed? Ask your question here

No results