Pioneer VSX-830 manual

Pioneer VSX-830
7.8 · 3
PDF manual
 · 142 pages
English
manualPioneer VSX-830
52

Basic Setup

05
A: Connecting with a LAN cable (wired LAN)
Simply connect the LAN cable. Network settings are unnecessary.
! When wireless LAN is set once, the following procedures 1 through 3 must be executed.
! Only when connected to a network without a DHCP server function, the following network settings are neces-
sary. Check the setting value with the provider or network administrator in advance when executing the set-
tings. Also refer to the user’s manual for network equipment.
! IP Address
The IP address to be entered must be defined within the following ranges. If the IP address defined is beyond
the following ranges, you cannot play back audio files stored on components on the network or listen to
Internet radio stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254
! Subnet Mask
In case an xDSL modem or a terminal adapter is directly connected to this receiver, enter the subnet mask
provided by your ISP on paper. In most cases, enter 255.255.255.0.
! Default Gateway
In case a gateway (router) is connected to this receiver, enter the corresponding IP address.
! Primary DNS Server/Secondary DNS Server
In case there is only one DNS server address provided by your ISP on paper, enter it in the
Primary DNS Server’ field. In case there are more than two DNS server addresses, enter
Secondary DNS Server’ in the other DNS server address field.
! Proxy Hostname/Proxy Port
This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address
of your proxy server in the ‘Proxy Hostname’ field. Also, enter the port number of your proxy server in the
Proxy Port’ field.
1 Select ‘Network Type’ from the Network, Bluetooth menu.
2 Use k/l to select ‘Wired’.
3 Select ‘OK’, then press ENTER.
The confirmation screen will be displayed. Select ‘YES’ and press ENTER.
The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,
execute the following operation.
4 Press HOME MENU.
5 Select ‘Network, Bluetooth’ from the HOME MENU.
6 Select ‘Network Connection’ from the Network, Bluetooth menu.
7 Select ‘Wired’ from the Network Connection menu.
8 Select the DHCP setting you want.
When you select ON, the network is automatically set up, and you do not need to follow Steps 9. Proceed with
Step 10.
If there is no DHCP server on the network and you select ON, this receiver will use its own Auto IP function to
determine the IP address.
! The IP address determined by the Auto IP function is 169.254.X.X. You cannot listen to an Internet radio sta-
tion if the IP address is set for the Auto IP function.
9 Enter the IP Address, Subnet Mask, Default Gateway, Primary DNS Server and
Secondary DNS Server.
Press i/j to select a number and k/l to move the cursor.
10 Select ‘OFF’ or ‘ON’ for the Enable Proxy Server setting to deactivate or activate the proxy
server.
In case you select ‘OFF’, proceed with Step 13. In case you select ‘ON’, on the other hand, proceed with Step 11.
11 Enter the address of your proxy server or the domain name.
Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.
12 Enter the port number of your proxy server.
Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.
13 Select ‘OK’ to confirm the IP Address/Proxy setup.
B: Setting this receiver with iOS equipment (iOS version 5.0 or later)
The Wi-Fi settings of your iPod/iPhone/iPad (equipment with iOS version 5.0 or later) can be applied to this
receiver.
! The iOS equipment and router must be connected through Wi-Fi.
! Check that the LAN cable is not connected to this receiver.
1 Unlock the iPod/iPhone/iPad.
Check that the Wi-Fi operation mark is shown on the screen of the iOS equipment.
2 Select ‘Network Type’ from the Network, Bluetooth menu.
3 Use k/l to select ‘Wireless’.
4 Select ‘OK’, then press ENTER.
The confirmation screen will be displayed. Select ‘YES’ and press ENTER.
The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,
execute the following operation.
5 Press HOME MENU.
6 Select ‘Network, Bluetooth’ from the HOME MENU.
7 Select ‘Network Connection’ from the Network, Bluetooth menu.
8 Select ‘Wireless’ from the Network Connection menu.
9 Select ‘Wi-Fi Sharing’
10 Connect the iOS equipment to the iPod/iPhone terminal on the front panel.
11 Select ‘START’, then press ENTER.
12 Tap [Allow] on iPod/iPhone/iPad.
The Wi-Fi settings of your iPod/iPhone/iPad is applied to this receiver.
 

 

 

 

View the manual for the Pioneer VSX-830 here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-830 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
C
Chris January 22, 2023

How do I configure my receiver with a firestick device? I tried pairing the firestick directly to my tv first but I’m getting no sound just picture. Thanks.

A
Alan December 24, 2023

Model vsx830. FL light is flashing. Can not turn amp on

R
Rose BrooksApril 11, 2024

Will VSX-830 carry two Klipsçh speakers

The Pioneer VSX-830 is a receiver designed for home entertainment systems. It offers a range of features that enhance audio and video experiences. With its sleek design, this receiver adds a touch of modernity to any setup. Equipped with advanced technologies, the Pioneer VSX-830 delivers high-quality sound reproduction. It supports both Dolby TrueHD and DTS-HD Master audio formats, ensuring immersive and accurate audio playback. The receiver also features advanced digital-to-analog conversion, resulting in precise and dynamic sound. In terms of connectivity options, the VSX-830 offers a variety of inputs and outputs. It includes multiple HDMI inputs, allowing seamless connection to various devices such as Blu-ray players, gaming consoles, and set-top boxes. The receiver also supports 4K Ultra HD pass-through, ensuring compatibility with the latest video formats. The VSX-830 supports wireless connectivity through built-in Wi-Fi and Bluetooth. This enables easy streaming and playback from compatible devices, providing convenience and flexibility for users. With its intuitive interface and user-friendly remote control, operating the VSX-830 is straightforward. The receiver also supports smartphone control, allowing users to adjust settings and playback options conveniently. Overall, the Pioneer VSX-830 receiver is a versatile and reliable option for home entertainment enthusiasts. Combining cutting-edge technology with ease of use, this receiver elevates the audio and video experience, making it a worthwhile addition to any home theater setup.

General
BrandPioneer
ModelVSX-830
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-830 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my speakers to the Pioneer VSX-830 receiver?

Ensure that the speaker wires are properly inserted into the corresponding speaker terminals on the back of the receiver, making sure to match the polarity (+ and -).

How can I adjust the audio settings on the Pioneer VSX-830?

Access the on-screen menu, navigate to the "Audio" settings, and you can adjust various parameters including equalizer settings, channel levels, and sound modes.

How do I set up my TV with the Pioneer VSX-830 receiver?

Connect an HDMI cable from the HDMI OUT (ARC) port on the receiver to the HDMI ARC port on your TV. Then, ensure the TV's HDMI ARC setting is enabled, allowing audio to be sent from the TV to the receiver.

What should I do if there is no sound coming out of my speakers connected to the Pioneer VSX-830?

Check that the speaker wires are securely connected and that the speakers are powered on. Additionally, ensure the receiver is not on a muted mode and the correct input source is selected.

How can I optimize the audio performance of the Pioneer VSX-830 for my specific room?

The receiver offers automatic speaker calibration called "MCACC." Activate this feature, place the included microphone in your seating position, and follow the on-screen instructions to allow the receiver to analyze your room and automatically adjust the audio settings accordingly.

Is the manual of the Pioneer VSX-830 available in English?

Yes, the manual of the Pioneer VSX-830 is available in English .

Is your question not listed? Ask your question here

No results