Pioneer VSX-830-S manual

Pioneer VSX-830-S
7.5 · 4
PDF manual
 · 142 pages
English
manualPioneer VSX-830-S
Operating Instructions
AV Receiver
VSX-1130-K
VSX-

930-K/S

VSX-

830-K/S

View the manual for the Pioneer VSX-830-S here, for free. This manual comes under the category receivers and has been rated by 4 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-830-S or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelVSX-830-S | VSX-830-S
Productreceiver
EAN4988028290879
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)140 W
Audio output channels5.2 channels
Output impedance6 Ω
Signal-to-Noise Ratio (SNR)98 dB
Receiver typestereo
Inputs
HDMI in6
Composite video in2
Digital audio optical in1
Digital audio coaxial in1
Ethernet LAN (RJ-45) ports1
USB ports quantity1
AC (power) inYes
Outputs
Number of HDMI outputs1
Composite video out1
Ports & interfaces
Speakers connectivity type-
Connectivity technologyWired
File formats
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Network
Ethernet LANYes
Wi-Fi-
BluetoothYes
Radio
Supported radio bandsAM, FM
Preset stations quantity63
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Video
Supported video modes2160p
3DYes
Technical details
DisplayLCD
Audio decodersDolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD, DTS Neo:6, DTS-HD Master Audio
Handheld remote controlYes
Product colorSilver
Apple docking compatibilityNot supported
AirPlayYes
Yes
Power
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Weight & dimensions
Width435 mm
Depth331.5 mm
Height168 mm
Weight8700 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-830-S below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-830-S?

The Pioneer VSX-830-S has a weight of 8700 g.

What is the height of the Pioneer VSX-830-S?

The Pioneer VSX-830-S has a height of 168 mm.

What is the width of the Pioneer VSX-830-S?

The Pioneer VSX-830-S has a width of 435 mm.

What is the depth of the Pioneer VSX-830-S?

The Pioneer VSX-830-S has a depth of 331.5 mm.

What is the power output of the Pioneer VSX-830-S per channel?

The power output of the Pioneer VSX-830-S per channel is 140W. This means that it has a high power rating and is capable of delivering a strong and clear audio performance.

How many audio output channels does the Pioneer VSX-830-S have?

The Pioneer VSX-830-S has 5.2 audio output channels. This means that it supports surround sound and can provide an immersive audio experience for the user.

What is the output impedance of the Pioneer VSX-830-S?

The output impedance of the Pioneer VSX-830-S is 6 Ω. This is a standard impedance value and ensures compatibility with most speakers on the market.

What is the Signal-to-Noise Ratio (SNR) of the Pioneer VSX-830-S?

The Signal-to-Noise Ratio (SNR) of the Pioneer VSX-830-S is 98 dB. This is a high SNR value, indicating that the receiver can produce high-quality sound with minimal background noise.

How many HDMI inputs does the Pioneer VSX-830-S have?

The Pioneer VSX-830-S has 6 HDMI inputs. This is a generous amount of HDMI inputs, allowing the user to connect multiple devices such as game consoles, Blu-ray players, and streaming devices.

How do I troubleshoot if the Pioneer VSX-830-S receiver does not power on?

If the Pioneer VSX-830-S receiver does not power on, you can troubleshoot the issue by following these steps: 1. Check the power cord: Ensure that the power cord is securely plugged into an electrical outlet. If it is already plugged in, try unplugging it and plugging it back in. 2. Auto Power Down setting: If the receiver is set to Auto Power Down, it will automatically turn off at a specified time. Check the settings and adjust if necessary. 3. Manual power off/on: Press the STANDBY/ON button on the front panel to turn off the receiver, and then press it again to turn it back on. 4. Forced power off/on: If the receiver cannot be turned off using the STANDBY/ON button, press and hold the STANDBY/ON button on the front panel for at least 5 seconds. This will force the receiver to turn off and may resolve any issues. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact your nearest Pioneer service center for further assistance and repair if necessary. Please note that these troubleshooting steps are specific to the Pioneer VSX-830-S receiver and may not apply to other models.

How do I troubleshoot if the controls and displays on the Pioneer VSX-830-S receiver are not functioning properly?

To troubleshoot if the controls and displays on the Pioneer VSX-830-S receiver are not functioning properly, you can follow these steps: 1. Check the HDMI connections: Ensure that the HDMI cables are securely connected between the receiver and your TV or other devices. Make sure the cables are not damaged. 2. Power on sequence: Turn on your TV before turning on the receiver. This ensures that the receiver and TV can establish a proper connection. 3. HDMI control settings: Verify that the HDMI Control Mode is set to "ON" in the receiver's settings menu. This allows the receiver to communicate with your TV and control its functions. 4. Reset the receiver: If the controls and displays are still not functioning properly, try performing a reset on the receiver. Refer to the manual for instructions on how to reset the receiver to its factory settings. 5. Contact customer support: If the issue persists after trying the above steps, it is recommended to contact Pioneer customer support for further assistance and troubleshooting. Please note that these troubleshooting steps are specific to the Pioneer VSX-830-S receiver and may not apply to other models.

How do I troubleshoot if there is no audio output from the connected equipment on the Pioneer VSX-830-S receiver?

To troubleshoot if there is no audio output from the connected equipment on the Pioneer VSX-830-S receiver, you can follow these steps: 1. Check the audio settings: Ensure that the Fixed PCM setting is set to "OFF" in the audio options menu. This allows formats other than PCM to be played. Adjust the audio settings as necessary. 2. Verify the input selection: Make sure the correct input source is selected on the receiver. Check that the appropriate input signal is chosen for the connected equipment. 3. Check the equipment connections: Ensure that the source equipment is properly connected to the receiver. Refer to the "Connecting your equipment" section in the manual for guidance on proper connections. 4. Verify speaker connections: Check that the speakers are correctly connected to the receiver. Ensure that the speaker wires are securely connected to the appropriate terminals. 5. Check speaker settings: Verify that the speaker settings are properly configured. Ensure that the speaker system is set to the correct configuration (e.g., 5.1 channel, 7.1 channel) and that the speakers are not set to "NO" in the speaker settings menu. If the issue persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.

How do I troubleshoot if the HDZONE output on the Pioneer VSX-830-S receiver is not working?

To troubleshoot if the HDZONE output on the Pioneer VSX-830-S receiver is not working, you can follow these steps: 1. Check the HDZONE settings: Ensure that the HDZONE output is enabled in the receiver's settings menu. Verify that the HDZONE output is set to "ON" and that the correct input source is selected for the HDZONE. 2. Verify the connection: Check the HDMI cable connection between the receiver's HDMI OUT 2 port and the TV or display device in the HDZONE. Ensure that the cable is securely connected and not damaged. 3. Power cycle the devices: Turn off the receiver, TV, and any other devices connected to the HDZONE. Unplug their power cords from the electrical outlet, wait for a few minutes, and then plug them back in. Power on the devices and check if the HDZONE output is working. 4. Reset the HDZONE settings: If the HDZONE output is still not working, try resetting the HDZONE settings to their default values. Refer to the manual for instructions on how to reset the HDZONE settings. 5. Contact customer support: If the issue persists after trying the above steps, it is recommended to contact Pioneer customer support for further assistance and troubleshooting. Please note that these troubleshooting steps are specific to the Pioneer VSX-830-S receiver and may not apply to other models.

How do I troubleshoot if the multi-zone playback feature (ZONE Ready) on the Pioneer VSX-830-S receiver is not functioning as expected?

To troubleshoot if the multi-zone playback feature (ZONE Ready) on the Pioneer VSX-830-S receiver is not functioning as expected, you can follow these steps: 1. Check the ZONE settings: Ensure that the ZONE feature is enabled in the receiver's settings menu. Verify that the ZONE output is set to "ON" and that the correct input source is selected for the ZONE. 2. Verify the connection: Check the audio cable connection between the ZONE output on the receiver and the speakers or audio system in the secondary zone. Ensure that the cables are securely connected and not damaged. 3. Power cycle the receiver: Turn off the receiver and unplug its power cord from the electrical outlet. Wait for a few minutes, then plug it back in and power it on. This can help reset the receiver and resolve any temporary issues. 4. Check the speaker settings: Verify that the speaker settings for the secondary zone are properly configured. Ensure that the speakers are connected and set up correctly in the ZONE settings menu. 5. Contact customer support: If the issue persists after trying the above steps, it is recommended to contact Pioneer customer support for further assistance and troubleshooting. Please note that these troubleshooting steps are specific to the Pioneer VSX-830-S receiver and may not apply to other models.

Is the manual of the Pioneer VSX-830-S available in English?

Yes, the manual of the Pioneer VSX-830-S is available in English .

Is your question not listed? Ask your question here

No results