Pioneer VSX-822 manual

Pioneer VSX-822
8.5 · 7
PDF manual
 · 65 pages
English
manualPioneer VSX-822
10
Chapter
10
59

Additional information

Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isn’t sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work.
If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.
General
The power does not turn on.
Disconnect the power plug from the outlet, and insert again.
Make sure there are no loose strands of speaker wire touching
the rear panel. This could cause the receiver to shut off
automatically.
The receiver suddenly switches off.
When the Auto Power Down function is working, the power will
automatically turn off if the receiver has not operated for
several hours. Check the setting for the Auto Power Down
function (see The Auto Power Down menu on page 51).
After about a minute (you won’t be able to switch the unit on
during this time), switch the receiver back on. If the message
persists, call a Pioneer authorized independent service
company.
The power suddenly turns on or off, or the input suddenly
changes (When the Control with HDMI is ON).
This happens because of the synchronized operation due to
the Control with HDMI function. If synchronized operations
are not needed, set the Control with HDMI to OFF (see HDMI
Setup on page 52).
OVERHEAT shows in the display and the power turns off.
The temperature within the unit has exceeded the allowable
value. Try moving the unit for better ventilation (page 2).
Lower the volume level.
TEMP shows in the display and the volume level drops.
The temperature within the unit has exceeded the allowable
value. Try moving the unit for better ventilation (page 2).
Lower the volume level.
No sound is output when an input function is selected.
Use
VOLUME +/–
to turn up the volume.
Press
MUTE
on the remote control to turn muting off.
Press
SPEAKERS
to select the proper speaker set (see
Switching the speaker terminal on page 14).
Set the
SIGNAL SEL
to H (HDMI), C1/O1 (digital) or A (analog)
according to the type of connections made (page 25).
Make sure the component is connected correctly (refer to
Connecting your equipment on page 11).
Check the audio output settings of the source component.
Refer to the instruction manual supplied with the source
component.
No image is output when an input function is selected.
Make sure the component is connected correctly (refer to
Connecting your equipment on page 11).
VSX-822 only: Use the same type of video cables for the source
component and TV to connect to this receiver (see About video
outputs connection (VSX-822 only) on page 16).
VSX-1022 only: Check The Input Assign menu on page 49 to
make sure you’re assigned the correct input.
The video input selected on the TV monitor is incorrect. Refer
to the instruction manual supplied with the TV.
VSX-1022 only: For HDMI, or when Video Converter is set to OFF
and a TV and another component are connected with different
cords (in Video Converter on page 49), you must connect your
TV to this receiver using the same type of video cable as you
used to connect your video component.
VSX-1022 only: Some components (such as video game units)
have resolutions that may not be converted. If adjusting this
receiver’s Resolution setting (in Resolution on page 50) and/or
the resolution settings on your component or display doesn’t
work, try switching Video Converter (in Video Converter on
page 49) OFF.
No sound from subwoofer.
Make sure the subwoofer is switched on.
If the subwoofer has a volume knob, make sure it’s turned up.
The Dolby Digital or DTS source you are listening to may not
have an LFE channel.
Switch the subwoofer setting in Speaker Setting on page 46 to
YES or PLUS.
Switch the LFE ATT (LFE Attenuate) on page 36 to LFEATT 0 or
LFEATT 5.
No sound from surround or center speakers.
Connect the speakers properly (page 12).
Refer to Speaker Setting on page 46 to check the speaker
settings.
Refer to Channel Level on page 48 to check the speaker levels.
The OSD screen (Home Menu, etc.) isn’t displayed.
The OSD will not appear if you have connected using the
composite output to your TV. Use HDMI connection when
setting up the system.
The Phase Control feature doesn’t seem to have an
audible effect.
If applicable, check that the lowpass filter switch on your
subwoofer is off, or the lowpass cutoff is set to the highest
frequency setting. If there is a PHASE setting on your
subwoofer, set it to 0º (or depending on the subwoofer, the
setting where you think it has the best overall effect on the
sound).
Make sure the speaker distance setting is correct for all
speakers (see Speaker Distance on page 48).
Considerable noise in radio broadcasts.
Connect the antenna (page 21) and adjust the position for best
reception.
Route any loose cables away from the antenna terminals and
wires.
Fully extend the FM wire antenna, position for best reception,
and secure to a wall (or connect an outdoor FM antenna).
Connect an additional internal or external AM antenna
(page 21).
Turn off equipment causing interference or move it away from
the receiver (or move antennas farther away from equipment
causing noise).
Broadcast stations cannot be selected automatically.
Connect an outdoor antenna (page 21).
Noise during playback of a cassette deck.
Move the cassette deck away from your receiver, until the noise
disappears.
No sound is output or a noise is output when software
with DTS is played back.
Make sure the player’s settings are correct and/or the DTS
signal out is on. Refer to the instruction manual supplied with
the DVD player.
There seems to be a time lag between the speakers and
the output of the subwoofer.
See Automatically setting up for surround sound (MCACC) on
page 23 to set up your system again using MCACC (this will
automatically compensate for a delay in the subwoofer output).

View the manual for the Pioneer VSX-822 here, for free. This manual comes under the category receivers and has been rated by 7 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-822 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 20
S
StaceyFebruary 13, 2021

I don’t have sound on my TV. The auto-surround/stream direct button is flashing SP off. Could that be the problem?

1 comment
E
Emma of manua.lsDecember 21, 2023

The flashing "SP off" on the auto-surround/stream direct button of the Pioneer VSX-822 receiver indicates that the speaker output is turned off. This could be the reason why you don't have sound on your TV. To resolve this issue, you need to turn on the speaker output.

This answer is automatically generated
J
Joe ReustJune 13, 2021

Power company was working on lines, cut power to the neighborhood, when power came back on receiver won’t power up, yes it’s plugged in !

Power company was working on lines, cut power to the neighborhood, when power came back on receiver won’t power up, yes it’s ...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

The possible reason why the Pioneer VSX-822 receiver is not turning on after the power was restored following a power outage in the neighborhood, even though it is connected to a power source, could be due to a few factors. Here are some troubleshooting steps you can try: 1. Disconnect the power plug from the outlet and insert it again to ensure a proper connection. 2. Check for any loose strands of speaker wire touching the rear panel of the receiver, as this could cause it to shut off automatically. 3. Verify if the Auto Power Down function is enabled. If it is, the receiver may automatically turn off if it has not been operated for several hours. You can check and adjust the Auto Power Down setting in the menu. 4. If the receiver suddenly switches off, wait for about a minute and then try switching it back on. If the issue persists, it is recommended to contact a Pioneer authorized independent service company for further assistance. 5. If the power suddenly turns on or off, or the input suddenly changes when the Control with HDMI function is enabled, you can try disabling the Control with HDMI function in the HDMI Setup menu. 6. If the display shows "OVERHEAT" and the power turns off, it indicates that the temperature within the unit has exceeded the allowable value. Try moving the receiver to a location with better ventilation and lower the volume level. 7. If there is no sound output when an input function is selected, ensure that the volume is turned up, the mute function is disabled, and the proper speaker set is selected in the menu. Also, check the audio output settings of the source component. 8. If there is no image output when an input function is selected, make sure the components are correctly connected, and for the VSX-822 model, use the same type of video cables for the source component and TV. Additionally, check the input assignment and video input settings on the TV. 9. If there is no sound from the subwoofer, ensure that the subwoofer is switched on.

This answer is automatically generated
V
ValentinaJuly 1, 2021

The device does not connect with the optical audio even though everything sounds fine on the tuner. But when I switch to optical audio output, it remains silent and the cable is in good condition. What could be happening?

The device does not connect with the optical audio even though everything sounds fine on the tuner. But when I switch to opti...
zoom-in
View photo
This message has been automatically translated
T
Tim Long November 6, 2016

Good morning, all of a sudden I can't get my I-phone to play music through my speakers. ? I put the selector on I-pod/usb and hit the direct controll button and it usually comes right on. I resently added a turntable and have that playing on the DVDs spot on the selector as I also have a CD player hooked up as well in the cd spot on the selector. I may have pushed another button on front of panel , any suggestions would be appreciated. Thank you Tim

B
BobOctober 26, 2020

to be more specific regarding my previous "connect to Firestick" question, 1) Which HDMI port do I use for the Firestick input? 2) What selector channel for output....DVD, BD, SAT/CABLE, Video...?

1 comment
D
DanNovember 24, 2021

Pioneer VSX-822k Which HDMI port do I use for the Firestick input? 2) What selector channel for output....DVD, BD, SAT/CABLE, Video...?

B
Bill MilliganOctober 17, 2022

Getting no sound out of the receiver. There is a large letter H that appears over the HDMI indicator that wasn’t there before.

G
Gene OglesbeeFebruary 28, 2020

How do I set up the controls/cabling on my VSX-822 Receiver to receive Pandora?

Y
YvesJuly 16, 2019

Que veut dire pls wait ? Inscrit sur le devant de l'appareil ?

D
DianeJuly 28, 2019

The HDMI light is blinking on the unit... What does this mean?

E
Eduardo GoodeFebruary 1, 2020

How to connect my cable box to my reciever for surround sound

The Pioneer VSX-822 receiver is a 5.1 channel audio device with a power output of 80 W per channel at 20-20KHz and 110 W per channel at 1KHz, when connected to an 8 Ohm load. It is also capable of delivering 140 W per channel at 1KHz with a 6 Ohm load. The receiver features six HDMI inputs, two composite video inputs, one set of audio (L/R) inputs, two digital audio optical inputs, and two digital audio coaxial inputs. Additionally, the Pioneer VSX-822 offers one USB port for connecting external devices. It provides one HDMI output and one composite video output for connecting to compatible displays. The receiver also includes a headphone output for private listening. Built with quality components, the Pioneer VSX-822 ensures reliability and durability over time. Its sleek design and compact size make it suitable for various home entertainment setups. With its multiple connectivity options, the receiver allows for easy integration with various audio and video sources. The Pioneer VSX-822 is engineered to deliver immersive sound experience, providing clear audio reproduction and powerful bass. It is compatible with a wide range of audio formats, ensuring versatility in playback options. The receiver's user-friendly interface and intuitive control layout make it easy to navigate and operate. In conclusion, the Pioneer VSX-822 receiver is a feature-packed audio device designed to enhance the audio experience in a home entertainment setup. With its versatile connectivity options, power output capabilities, and reliable construction, it offers a solid choice for users looking to elevate their audio performance.

General
BrandPioneer
ModelVSX-822 | VSX822K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)80 W
Audio output channels5.1 channels
Power output per channel (1KHz@8 Ohm)110 W
Power output per channel (1KHz@6 Ohm)140 W
Audio D/A Converter (DAC)24-bit/192kHz
Receiver type-
Inputs
HDMI in6
Composite video in2
Audio (L/R) in1
Digital audio optical in2
Digital audio coaxial in2
USB ports quantity1
Outputs
Number of HDMI outputs1
Composite video out1
Headphone outputs1
Ports & interfaces
Speakers connectivity type-
Connectivity technologyWired
File formats
Audio formats supportedFLAC, MP3, WAV, WMA
Network
Ethernet LANNo
Wi-FiNo
Radio
Supported radio bandsAM, FM
Internet radio services supportedPandora
Optical drive
Optical drive included-
Storage
Card reader integrated-
Video
3DYes
Technical details
Display-
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
x.v.Color supportYes
Audio Return Channel (ARC)Yes
Handheld remote controlYes
Product colorBlack
Audio amplifierYes
Sleep timerYes
Volume controlRotary
On Screen Display (OSD)Yes
Apple docking compatibilityYes
Audio Lip synchronizationYes
AirPlayYes
AV inputYes
Graphical user interface (GUI)Yes
Bi-ampingYes
Apple dockingYes
Yes
Weight & dimensions
Width435.1 mm
Depth342.39 mm
Height167.64 mm
Weight8899 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-822 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-822?

The Pioneer VSX-822 has a weight of 8899 g.

What is the height of the Pioneer VSX-822?

The Pioneer VSX-822 has a height of 167.64 mm.

What is the width of the Pioneer VSX-822?

The Pioneer VSX-822 has a width of 435.1 mm.

What is the depth of the Pioneer VSX-822?

The Pioneer VSX-822 has a depth of 342.39 mm.

How do I connect my speakers to the Pioneer VSX-822 receiver?

To connect your speakers to the receiver, locate the speaker output terminals on the back of the unit and follow the provided color-coded labels (red for positive and black for negative) to connect the corresponding speaker cables securely.

How do I adjust the audio settings on the Pioneer VSX-822 receiver?

To adjust the audio settings, navigate to the "Audio Setup" menu on the receiver's display. From there, you can modify various settings such as speaker size, equalizer presets, bass and treble levels, and even enable room calibration features if available.

How can I set up and customize the remote control on the Pioneer VSX-822 receiver?

To set up and customize the remote control, access the "Remote Setup" menu on the receiver's display. This menu allows you to configure functions such as TV control, input switching, and other personalized settings to enhance your remote control experience.

How do I program and save radio stations on the Pioneer VSX-822 receiver?

To program and save radio stations, tune in to the desired radio frequency manually or use the auto-tuning feature. Once the desired station is playing, press and hold the preset button on the receiver or remote control where you want to store the station. The station will then be saved for easy access in the future.

How can I troubleshoot common audio issues with the Pioneer VSX-822 receiver?

If you encounter audio issues, first check your speaker connections to ensure they are properly attached and secure. Additionally, verify that the speaker wires are not frayed or damaged. If the issue persists, try power cycling the receiver, resetting it to factory defaults, or checking if any audio settings are misconfigured.

Does the Pioneer VSX-822 have a power output of 80W per channel?

Yes, the Pioneer VSX-822 has a power output of 80W per channel. This means it can deliver a decent amount of volume and power to your speakers.

How many HDMI inputs does the Pioneer VSX-822 have?

The Pioneer VSX-822 has 6 HDMI inputs. This allows you to connect multiple devices, such as gaming consoles, Blu-ray players, and streaming devices, to your receiver.

Can I connect my headphones to the Pioneer VSX-822?

Yes, the Pioneer VSX-822 has a headphone output. This allows you to enjoy personal audio without disturbing others in the room.

How many audio formats are supported by the Pioneer VSX-822?

The Pioneer VSX-822 supports FLAC, MP3, WAV, and WMA audio formats. This means you can enjoy high-quality audio from various sources, including lossless audio files.

Does the Pioneer VSX-822 have a digital audio optical input?

Yes, the Pioneer VSX-822 has 2 digital audio optical inputs. This provides flexibility for connecting devices that use optical audio output, such as a DVD player or a soundbar.

Is the manual of the Pioneer VSX-822 available in English?

Yes, the manual of the Pioneer VSX-822 is available in English .

Is your question not listed? Ask your question here

No results