Pioneer VSX-822 manual

Pioneer VSX-822
8.5 · 7
PDF manual
 · 65 pages
English
manualPioneer VSX-822
2
2
11
Chapter

Connecting your equipment

Determining the speakers’ application
By connecting the left and right front speakers (L/R), the
center speaker (C), the left and right surround speakers (SL/
SR), the left and right surround back speakers (SBL/SBR) (or
the left and right front height speakers (FHL/FHR)), and the
subwoofer (SW), a surround sound system up to 7.1 channel
can be enjoyed.
The 5.1 channel surround system is the most commonly-used
in home theaters. To achieve the best possible surround
sound, install your speakers as shown below.
Important
VSX-1022 only: Both the surround back speakers and the
front height speakers can be connected at the same time.
In this case, sound will be output from either the front
height speaker or the surround back speaker depending on
which one was selected in the Speaker System setting
(see The Speaker System setting (VSX-1022 only)
on
page 49).
VSX-822 only: To connect the surround back or front
height speakers, an additional amplifier is required.
Connect the additional amplifier to the PRE OUT SURR
BACK/FRONT HEIGHT outputs of this unit and connect the
surround back or front height speakers to the additional
amplifier (see Connect the surround back or front height
speakers (In case of VSX-822) on page 12).
VSX-1022 only: Another way, you can use the speakers
connected to the B speaker terminals to listen to stereo
playback in another room. See Switching the speaker terminal
on page 14 for the listening options with this setup.
You will not be able to connect the B speakers if you
connect the front height speakers in the main zone.
Further, if you use the B speakers, a 5.1 ch playback will be
the maximum in the main zone. (No sound is output from
the surround back speaker.)
Some tips for improving sound quality
Where you put your speakers in the room has a big effect on
the quality of the sound. The following guidelines should help
you to get the best sound from your system.
It is best to angle the speakers towards the listening
position. The angle depends on the size of the room. Use
less of an angle for bigger rooms.
Refer to the chart below for placement of speakers you
intend to connect.
-
Place the surround speakers at 120º from the center. If
you, (1) use the surround back speaker, and, (2) don’t use
the front height speakers, we recommend placing the
surround speaker right beside you.
-
If you intend to connect only one surround back
speakers, place it directly behind you.
-
If the surround speakers cannot be set directly to the side
of the listening position with a 7.1-channel system, the
surround effect can be enhanced by turning off the Up
Mix function (see Setting the Up Mix function
on page 35).
For the best stereo effect, place the front speakers 2 m to
3 m apart, at equal distance from the TV.
If you’re using a center speaker, place the front speakers at
a wider angle. If not, place them at a narrower angle.
Place the center speaker above or below the TV so that the
sound of the center channel is localized at the TV screen.
Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right
speakers.
SL
L
SW
C
RR
SR
SL
L
SW
C
SR
SB
5.1 channel surround
system:
6.1 channel surround
(Surround back) system:
C
SL
L
FHL
FHR
SW
R
SR
SL
L
SW
C
R
SR
SBL
SBR
7.1 channel surround
(Surround back) system:
7.1 channel surround
(Front height) system:
L
R
Main zone
Speaker B
L
SW
C
FHL
SL
SBL
SBR
SB
SR
R
FHR
30 30
60
120 120

View the manual for the Pioneer VSX-822 here, for free. This manual comes under the category receivers and has been rated by 7 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-822 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 20
S
StaceyFebruary 13, 2021

I don’t have sound on my TV. The auto-surround/stream direct button is flashing SP off. Could that be the problem?

1 comment
E
Emma of manua.lsDecember 21, 2023

The flashing "SP off" on the auto-surround/stream direct button of the Pioneer VSX-822 receiver indicates that the speaker output is turned off. This could be the reason why you don't have sound on your TV. To resolve this issue, you need to turn on the speaker output.

This answer is automatically generated
J
Joe ReustJune 13, 2021

Power company was working on lines, cut power to the neighborhood, when power came back on receiver won’t power up, yes it’s plugged in !

Power company was working on lines, cut power to the neighborhood, when power came back on receiver won’t power up, yes it’s ...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

The possible reason why the Pioneer VSX-822 receiver is not turning on after the power was restored following a power outage in the neighborhood, even though it is connected to a power source, could be due to a few factors. Here are some troubleshooting steps you can try: 1. Disconnect the power plug from the outlet and insert it again to ensure a proper connection. 2. Check for any loose strands of speaker wire touching the rear panel of the receiver, as this could cause it to shut off automatically. 3. Verify if the Auto Power Down function is enabled. If it is, the receiver may automatically turn off if it has not been operated for several hours. You can check and adjust the Auto Power Down setting in the menu. 4. If the receiver suddenly switches off, wait for about a minute and then try switching it back on. If the issue persists, it is recommended to contact a Pioneer authorized independent service company for further assistance. 5. If the power suddenly turns on or off, or the input suddenly changes when the Control with HDMI function is enabled, you can try disabling the Control with HDMI function in the HDMI Setup menu. 6. If the display shows "OVERHEAT" and the power turns off, it indicates that the temperature within the unit has exceeded the allowable value. Try moving the receiver to a location with better ventilation and lower the volume level. 7. If there is no sound output when an input function is selected, ensure that the volume is turned up, the mute function is disabled, and the proper speaker set is selected in the menu. Also, check the audio output settings of the source component. 8. If there is no image output when an input function is selected, make sure the components are correctly connected, and for the VSX-822 model, use the same type of video cables for the source component and TV. Additionally, check the input assignment and video input settings on the TV. 9. If there is no sound from the subwoofer, ensure that the subwoofer is switched on.

This answer is automatically generated
V
ValentinaJuly 1, 2021

The device does not connect with the optical audio even though everything sounds fine on the tuner. But when I switch to optical audio output, it remains silent and the cable is in good condition. What could be happening?

The device does not connect with the optical audio even though everything sounds fine on the tuner. But when I switch to opti...
zoom-in
View photo
This message has been automatically translated
T
Tim Long November 6, 2016

Good morning, all of a sudden I can't get my I-phone to play music through my speakers. ? I put the selector on I-pod/usb and hit the direct controll button and it usually comes right on. I resently added a turntable and have that playing on the DVDs spot on the selector as I also have a CD player hooked up as well in the cd spot on the selector. I may have pushed another button on front of panel , any suggestions would be appreciated. Thank you Tim

B
BobOctober 26, 2020

to be more specific regarding my previous "connect to Firestick" question, 1) Which HDMI port do I use for the Firestick input? 2) What selector channel for output....DVD, BD, SAT/CABLE, Video...?

1 comment
D
DanNovember 24, 2021

Pioneer VSX-822k Which HDMI port do I use for the Firestick input? 2) What selector channel for output....DVD, BD, SAT/CABLE, Video...?

B
Bill MilliganOctober 17, 2022

Getting no sound out of the receiver. There is a large letter H that appears over the HDMI indicator that wasn’t there before.

G
Gene OglesbeeFebruary 28, 2020

How do I set up the controls/cabling on my VSX-822 Receiver to receive Pandora?

Y
YvesJuly 16, 2019

Que veut dire pls wait ? Inscrit sur le devant de l'appareil ?

D
DianeJuly 28, 2019

The HDMI light is blinking on the unit... What does this mean?

E
Eduardo GoodeFebruary 1, 2020

How to connect my cable box to my reciever for surround sound

The Pioneer VSX-822 receiver is a 5.1 channel audio device with a power output of 80 W per channel at 20-20KHz and 110 W per channel at 1KHz, when connected to an 8 Ohm load. It is also capable of delivering 140 W per channel at 1KHz with a 6 Ohm load. The receiver features six HDMI inputs, two composite video inputs, one set of audio (L/R) inputs, two digital audio optical inputs, and two digital audio coaxial inputs. Additionally, the Pioneer VSX-822 offers one USB port for connecting external devices. It provides one HDMI output and one composite video output for connecting to compatible displays. The receiver also includes a headphone output for private listening. Built with quality components, the Pioneer VSX-822 ensures reliability and durability over time. Its sleek design and compact size make it suitable for various home entertainment setups. With its multiple connectivity options, the receiver allows for easy integration with various audio and video sources. The Pioneer VSX-822 is engineered to deliver immersive sound experience, providing clear audio reproduction and powerful bass. It is compatible with a wide range of audio formats, ensuring versatility in playback options. The receiver's user-friendly interface and intuitive control layout make it easy to navigate and operate. In conclusion, the Pioneer VSX-822 receiver is a feature-packed audio device designed to enhance the audio experience in a home entertainment setup. With its versatile connectivity options, power output capabilities, and reliable construction, it offers a solid choice for users looking to elevate their audio performance.

General
BrandPioneer
ModelVSX-822 | VSX822K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)80 W
Audio output channels5.1 channels
Power output per channel (1KHz@8 Ohm)110 W
Power output per channel (1KHz@6 Ohm)140 W
Audio D/A Converter (DAC)24-bit/192kHz
Receiver type-
Inputs
HDMI in6
Composite video in2
Audio (L/R) in1
Digital audio optical in2
Digital audio coaxial in2
USB ports quantity1
Outputs
Number of HDMI outputs1
Composite video out1
Headphone outputs1
Ports & interfaces
Speakers connectivity type-
Connectivity technologyWired
File formats
Audio formats supportedFLAC, MP3, WAV, WMA
Network
Ethernet LANNo
Wi-FiNo
Radio
Supported radio bandsAM, FM
Internet radio services supportedPandora
Optical drive
Optical drive included-
Storage
Card reader integrated-
Video
3DYes
Technical details
Display-
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
x.v.Color supportYes
Audio Return Channel (ARC)Yes
Handheld remote controlYes
Product colorBlack
Audio amplifierYes
Sleep timerYes
Volume controlRotary
On Screen Display (OSD)Yes
Apple docking compatibilityYes
Audio Lip synchronizationYes
AirPlayYes
AV inputYes
Graphical user interface (GUI)Yes
Bi-ampingYes
Apple dockingYes
Yes
Weight & dimensions
Width435.1 mm
Depth342.39 mm
Height167.64 mm
Weight8899 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-822 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-822?

The Pioneer VSX-822 has a weight of 8899 g.

What is the height of the Pioneer VSX-822?

The Pioneer VSX-822 has a height of 167.64 mm.

What is the width of the Pioneer VSX-822?

The Pioneer VSX-822 has a width of 435.1 mm.

What is the depth of the Pioneer VSX-822?

The Pioneer VSX-822 has a depth of 342.39 mm.

How do I connect my speakers to the Pioneer VSX-822 receiver?

To connect your speakers to the receiver, locate the speaker output terminals on the back of the unit and follow the provided color-coded labels (red for positive and black for negative) to connect the corresponding speaker cables securely.

How do I adjust the audio settings on the Pioneer VSX-822 receiver?

To adjust the audio settings, navigate to the "Audio Setup" menu on the receiver's display. From there, you can modify various settings such as speaker size, equalizer presets, bass and treble levels, and even enable room calibration features if available.

How can I set up and customize the remote control on the Pioneer VSX-822 receiver?

To set up and customize the remote control, access the "Remote Setup" menu on the receiver's display. This menu allows you to configure functions such as TV control, input switching, and other personalized settings to enhance your remote control experience.

How do I program and save radio stations on the Pioneer VSX-822 receiver?

To program and save radio stations, tune in to the desired radio frequency manually or use the auto-tuning feature. Once the desired station is playing, press and hold the preset button on the receiver or remote control where you want to store the station. The station will then be saved for easy access in the future.

How can I troubleshoot common audio issues with the Pioneer VSX-822 receiver?

If you encounter audio issues, first check your speaker connections to ensure they are properly attached and secure. Additionally, verify that the speaker wires are not frayed or damaged. If the issue persists, try power cycling the receiver, resetting it to factory defaults, or checking if any audio settings are misconfigured.

Does the Pioneer VSX-822 have a power output of 80W per channel?

Yes, the Pioneer VSX-822 has a power output of 80W per channel. This means it can deliver a decent amount of volume and power to your speakers.

How many HDMI inputs does the Pioneer VSX-822 have?

The Pioneer VSX-822 has 6 HDMI inputs. This allows you to connect multiple devices, such as gaming consoles, Blu-ray players, and streaming devices, to your receiver.

Can I connect my headphones to the Pioneer VSX-822?

Yes, the Pioneer VSX-822 has a headphone output. This allows you to enjoy personal audio without disturbing others in the room.

How many audio formats are supported by the Pioneer VSX-822?

The Pioneer VSX-822 supports FLAC, MP3, WAV, and WMA audio formats. This means you can enjoy high-quality audio from various sources, including lossless audio files.

Does the Pioneer VSX-822 have a digital audio optical input?

Yes, the Pioneer VSX-822 has 2 digital audio optical inputs. This provides flexibility for connecting devices that use optical audio output, such as a DVD player or a soundbar.

Is the manual of the Pioneer VSX-822 available in English?

Yes, the manual of the Pioneer VSX-822 is available in English .

Is your question not listed? Ask your question here

No results