Pioneer VSX-821-K manual

Pioneer VSX-821-K
8.5 · 16
PDF manual
 · 144 pages
English
manualPioneer VSX-821-K

Basic playback

04
22
En
04

Chapter 4:

Basic playback

Playing a source

Here are the basic instructions for playing a source (such as
a DVD disc) with your home theater system.
1
Switch on your system components and receiver.
Start by switching on the playback component (for example a
DVD player), your TV and subwoofer (if you have one), then
the receiver (press RECEIVER).
• Make sure the setup microphone is disconnected.
2
Switch the TV input to the input that connects this
receiver.
For example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now
selected.
3
Press input function buttons to select the input function
you want to play.
• The input of the receiver will switch over, and you will be
able to operate other components using the remote
control. To operate the receiver, first press on
the remote control, then press the appropriate button to
operate.
The input source can also be selected by using INPUT
SELECT buttons on the remote control, or by
using the front panel INPUT SELECTOR dial. In this case,
the remote control won’t switch operational modes.
If you selected the proper input source and there is still no
sound, select the audio input signal for playback (see
Selecting the audio input signal below).
4
Press AUTO/DIRECT to select ‘AUTO SURROUND’ and
start playback of the source.
If you’re playing a Dolby Digital or DTS surround sound DVD
disc, with a digital audio connection, you should hear
surround sound. If you’re playing a stereo source or if the
connection is an analog audio connection, you will only hear
sound from the front left/right speakers in the default
listening mode.
It is possible to check on the front panel display whether or
not surround sound playback is being performed properly.
When using a surround back speaker, 2D+PLIIx is
displayed when playing Dolby Digital 5.1-channel signals,
and DTS+NEO:6 is displayed when playing DTS 5.1-channel
signals.
When not using a surround back speaker, 2D is displayed
when playing Dolby Digital signals.
If the display does not correspond to the input signal and
listening mode, check the connections and settings.
Note
• You may need to check the digital audio output settings
on your DVD player or digital satellite receiver. It should
be set to output Dolby Digital, DTS and 88.2 kHz/96 kHz
PCM (2 channel) audio, and if there is an MPEG audio
option, set this to convert the MPEG audio to PCM.
• Depending on your DVD player or source discs, you may
only get digital 2 channel stereo and analog sound. In this
case, the receiver must be set to a multichannel listening
mode if you want multichannel surround sound.
5
Use MASTER VOLUME to adjust the volume level.
Turn down the volume of your TV so that all sound is coming
from the speakers connected to this receiver.
Selecting the audio input signal
The audio input signal can be selected for each input source.
Once it is set, the audio input that was selected will be
applied whenever you select the input source using the input
function buttons.
Press , then press SIGNAL SEL to select the
audio input signal corresponding to the source component.
Each press cycles through the following:
H – Selects an HDMI signal. H can be selected for BD,
DVD, DVR/BDR or VIDEO1 input. For other inputs, H
cannot be selected.
-
When the HDMI option in Setting the Audio options on
page 32 is set to THRU, the sound will be heard through
your TV, not from this receiver.
A – Selects the analog inputs.
C1/O1/O2 – Selects the digital input. The coaxial 1 input
is selected for C1, and the optical 1 or 2 audio input is
selected for O1 or O2.
When H (HDMI) or C1/O1/O2 (digital) is selected and the
selected audio input is not provided, A (analog) is
automatically selected.
Note
VIDEO1 input is fixed to H (HDMI). It cannot be changed.
•For the TV/SAT input, only A (analog) or C1/O1/O2
(digital) can be selected. However, if the ARC at HDMI
Setup is set to ON, the input is fixed to H (HDMI) and
cannot be changed.
• When set to H (HDMI) or C1/O1/O2 (digital), 2 lights
when a Dolby Digital signal is input, and DTS lights when
a DTS signal is input.
• When the H (HDMI) is selected, the A and DIGITAL
indicators are off (see page 7).
BD DVD
INPUT SELECT
SOURCESLEEP
TV
CONTROL
TV
INPUT
DVR/BDR
CD
CD-R
ADAPTER
iPod USB VIDEO
1
VIDEO
2
SIRIUS
TUNER
RECEIVER
CH
VOL
RECEIVER
ENTER
ADV SURR
AUTO/
DIRECT
MUTE
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
iPod
CTRL
CATEGORY
BAND
MENU
HOME
MENU
SETUP
DTV/
TV
TRE
BASS
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
BD MENU
ALC/
STANDARD
STEREO
RECEIVER
INPUT SELECT
SOURCESLEEP
TV
CONTROL
INPUT
RECEIVER
RECEIVER
DIMMER
SIGNAL SEL
D.ACCESS
4
7
MIDNIGHT
S.RETRIEVER
+
10
5
8
SPEAKERS
LEV
LEV
SB CH
CLR
EQ
PHASE
6
9
0
ENTER
CH
CH
CH SELECT
/
SHIFT
RECEIVER
VSX-821_UCSMXCN_En.book 22 ページ 󲃟󲃝󲃞󲃝年󲃞󲃟月󲃟󲃞日 火曜日 午後5時󲃞9分

View the manual for the Pioneer VSX-821-K here, for free. This manual comes under the category receivers and has been rated by 16 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-821-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
C
Carlos Enrique November 7, 2022

Why does it sound good on both channels (R and L) when selecting Pure Direct? If I try to use adv surr, only one channel sounds good.

Why does it sound good on both channels (R and L) when selecting Pure Direct?
If I try to use adv surr, only one channel soun...
zoom-in
View photo
This message has been automatically translated
P
Pete March 1, 2021

I would like to install a FM indoor antenna on my vsx 821 k Pioneer receiver, what cable end do I need to plug into the back of the receiver for the antenna ??

1 comment
E
Earl Chung JrFebruary 4, 2023

What size is the subwoofer cord

P
Phil GnesinJanuary 1, 2023

Recently my Pioneer receiver VSX-821-K stopped playing through wired speakers ( when I plug Iphone into USB port) plays through phone or bluetooth. How do I get it to play through wired speakers?

J
Jack HughesFebruary 15, 2023

How do I connect my cable box to my Receiver box to my VSX-821

How do I connect my cable box to my Receiver box to my VSX-821
zoom-in
View photo
P
Perry GaluppoSeptember 21, 2023

Can I add an older VCR player to my Pioneer VSX-821?

J
John Lacy November 3, 2023

Can I attach an external processor (equalizer) to the VSX-821

The Pioneer VSX-821-K is a receiver with an RMS rated power of 550W, providing a powerful audio output. With a Signal-to-Noise Ratio (SNR) of 79dB, it aims to offer clear and high-quality sound reproduction. The Total Harmonic Distortion (THD) of 0.05% ensures minimal distortion in the audio output, maintaining the integrity of the original sound. This receiver features 5.1 audio output channels, allowing for a surround sound experience. It offers multichannel audio input and output terminals, providing flexibility in connecting various audio devices. With two digital audio optical inputs and one digital audio coaxial input, it supports the connection of compatible devices. Additionally, it has two component video (YPbPr/YCbCr) inputs and four HDMI inputs, allowing for the connection of multiple video sources. The Pioneer VSX-821-K also includes one USB port for convenient connectivity with compatible external devices. It comes with a component video (YPbPr/YCbCr) output and one HDMI output, enabling users to effortlessly connect to compatible displays. Please note that power and audio output specifications are given in Watts (W), Signal-to-Noise Ratio is given in decibels (dB), and Total Harmonic Distortion is expressed as a percentage (%). The receiver offers multiple digital audio and video input options, along with the flexibility to connect external devices via USB.

General
BrandPioneer
ModelVSX-821-K | VSX-821-K
Productreceiver
EAN4988028133121
LanguageEnglish
FiletypeUser manual (PDF)
Audio
RMS rated power550 W
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Audio D/A Converter (DAC)24-bit/192kHz
Audio output channels5.1 channels
Power output per channel (20-20KHz@8 Ohm)130 W
Receiver typeSurround
Technical details
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:6, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Sleep timerYes
On Screen Display (OSD)Yes
Apple docking compatibilityNot supported
AirPlayNo
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
USB ports quantity1
Outputs
Multichannel audio output typeTerminals
Component video (YPbPr/YCbCr) out1
Number of HDMI outputs1
Headphone outputs7
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
File formats
Audio formats supportedAAC, MP3, WMA
Video formats supportedMPEG4
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9200 g
Width435 mm
Depth363 mm
Height168 mm
Network
Ethernet LANNo
Wi-FiNo
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)415 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-821-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a weight of 9200 g.

What is the height of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a height of 168 mm.

What is the width of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a width of 435 mm.

What is the depth of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a depth of 363 mm.

How do I connect my audio devices to the Pioneer VSX-821-K receiver?

Make sure to use the appropriate audio cables to connect your devices to the corresponding audio input ports on the back of the receiver. Ensure that the cables are securely plugged in for optimal sound quality.

How can I adjust the audio settings to enhance the sound experience?

Navigate through the receiver's on-screen menu to access the audio settings. From there, you can adjust parameters such as bass, treble, balance, and surround sound effects to customize your audio output according to your preferences.

How can I set up and configure the speaker system with the receiver?

Use the manual speaker setup guide to properly connect and place your speakers. The guide will provide step-by-step instructions on connecting the speakers to the receiver and configuring the appropriate speaker settings, such as speaker size, distance, and channel levels.

How do I set up and use the remote control properly?

Familiarize yourself with the remote control's layout and function buttons. The manual will explain how to pair the remote with the receiver and provide a detailed overview of all the available functions and commands to control various features of the Pioneer VSX-821-K.

How can I troubleshoot basic issues with the receiver?

The manual will provide troubleshooting tips to address common problems, such as audio distortion, no sound, or connectivity issues. It will guide you through potential solutions, including checking cable connections, power supply, and reset options, to help resolve any operational difficulties you may encounter.

Does the Pioneer VSX-821-K have a high RMS rated power?

No, the Pioneer VSX-821-K has a RMS rated power of 550W, which is relatively low compared to some other receivers on the market.

Is the Signal-to-Noise Ratio (SNR) of the Pioneer VSX-821-K good?

No, the Signal-to-Noise Ratio (SNR) of 79dB is not particularly high, meaning there may be some noticeable background noise while using this receiver.

Does the Pioneer VSX-821-K have low Total Harmonic Distortion (THD)?

Yes, the Total Harmonic Distortion (THD) of 0.05% is relatively low, indicating that the audio output should be fairly clean and accurate.

How many audio output channels does the Pioneer VSX-821-K have?

The Pioneer VSX-821-K has 5.1 channels for audio output, which allows for a surround sound experience.

How many HDMI inputs does the Pioneer VSX-821-K have?

The Pioneer VSX-821-K has 4 HDMI inputs, which provides ample connectivity options for various devices such as gaming consoles, Blu-ray players, and streaming devices.

Is the manual of the Pioneer VSX-821-K available in English?

Yes, the manual of the Pioneer VSX-821-K is available in English .

Is your question not listed? Ask your question here

No results