Pioneer VSX-821-K manual

Pioneer VSX-821-K
8.5 · 16
PDF manual
 · 144 pages
English
manualPioneer VSX-821-K

Connecting your equipment

19
En
English
Français
Español
02
02

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you
to control playback of audio content from your iPod using the
controls of this receiver.
Switch the receiver into standby, and then use the iPod
cable to connect your iPod to the iPod terminal on the front
panel of this receiver.
•Push down on the PUSH OPEN tab to access the iPod
terminal.
• For the cable connection, refer to also the operating
instructions for iPod.
• For instructions on playing the iPod, see Playing an iPod
on page 23.
• When the Control with HDMI function is ON and the
receiver is connected to a compatible TV with an HDMI
cable, and you switch the input of the TV when the
receiver's selection is iPod USB input, the receiver may
automatically switch to TV/SAT. If this happens, switch
the receiver's input back to the original input, or turn OFF
the Control with HDMI function (see HDMI Setup on
page 38).

Connecting a USB device

It is possible to listen to two-channel audio using the USB
interface on the front of this receiver.
Switch the receiver into standby then connect your USB
device to the USB terminal on the front panel of this
receiver.
• Push down on the PUSH OPEN tab to access the USB
terminal.
• This receiver does not support a USB hub.
For instructions on playing the USB device, see Playing a
USB device on page 24.

Plugging in the receiver

Only plug in after you have connected all your components to
this receiver, including the speakers.
Plug the AC power cord into a convenient AC power
outlet.
CAUTION
• Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged
power cord can cause a fire or give you an electric shock.
Check the power cord once in a while. If you find it
damaged, ask your nearest Pioneer authorized
independent service company for a replacement.
The receiver should be disconnected by removing the
mains plug from the wall socket when not in regular use,
e.g., when on vacation.
Note
• After this receiver is connected to an AC outlet, a 2
second to 10 second HDMI initialization process begins.
You cannot carry out any operations during this process.
The HDMI indicator in the front panel display blinks
during this process, and you can turn on this receiver
once it has stopped blinking. When you set the Control
with HDMI to OFF, you can skip this process. For details
about the Control with HDMI feature, see Control with
HDMI function on page 38.
MCACC
SETUP MIC
L AUDIO R
VIDEO
VIDEO 2 INPUT
iPod
iPhone
iPad
USB
5V 2.1
A
PHONES
MENU
Music

Genius >
Playlists
Artists
Albums
Songs
Radio
Genres
Composers
Audiobooks
CONTROL ON
/
OFF
iPod
iPod cable
This receiver
MCACC
SETUP MIC
L AUDIO R VIDEO
VIDEO 2 INPUT
iPod
iPhone
iPad
USB
5V 2.1
A
PHONES
CONTROL ON
/
OFF
USB mass
storage device
This receiver
VSX-821_UCSMXCN_En.book 19 ページ 󲃟󲃝󲃞󲃝年󲃞󲃟月󲃟󲃞日 火曜日 午後5時󲃞9分

View the manual for the Pioneer VSX-821-K here, for free. This manual comes under the category receivers and has been rated by 16 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-821-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
C
Carlos Enrique November 7, 2022

Why does it sound good on both channels (R and L) when selecting Pure Direct? If I try to use adv surr, only one channel sounds good.

Why does it sound good on both channels (R and L) when selecting Pure Direct?
If I try to use adv surr, only one channel soun...
zoom-in
View photo
This message has been automatically translated
P
Pete March 1, 2021

I would like to install a FM indoor antenna on my vsx 821 k Pioneer receiver, what cable end do I need to plug into the back of the receiver for the antenna ??

1 comment
E
Earl Chung JrFebruary 4, 2023

What size is the subwoofer cord

P
Phil GnesinJanuary 1, 2023

Recently my Pioneer receiver VSX-821-K stopped playing through wired speakers ( when I plug Iphone into USB port) plays through phone or bluetooth. How do I get it to play through wired speakers?

J
Jack HughesFebruary 15, 2023

How do I connect my cable box to my Receiver box to my VSX-821

How do I connect my cable box to my Receiver box to my VSX-821
zoom-in
View photo
P
Perry GaluppoSeptember 21, 2023

Can I add an older VCR player to my Pioneer VSX-821?

J
John Lacy November 3, 2023

Can I attach an external processor (equalizer) to the VSX-821

The Pioneer VSX-821-K is a receiver with an RMS rated power of 550W, providing a powerful audio output. With a Signal-to-Noise Ratio (SNR) of 79dB, it aims to offer clear and high-quality sound reproduction. The Total Harmonic Distortion (THD) of 0.05% ensures minimal distortion in the audio output, maintaining the integrity of the original sound. This receiver features 5.1 audio output channels, allowing for a surround sound experience. It offers multichannel audio input and output terminals, providing flexibility in connecting various audio devices. With two digital audio optical inputs and one digital audio coaxial input, it supports the connection of compatible devices. Additionally, it has two component video (YPbPr/YCbCr) inputs and four HDMI inputs, allowing for the connection of multiple video sources. The Pioneer VSX-821-K also includes one USB port for convenient connectivity with compatible external devices. It comes with a component video (YPbPr/YCbCr) output and one HDMI output, enabling users to effortlessly connect to compatible displays. Please note that power and audio output specifications are given in Watts (W), Signal-to-Noise Ratio is given in decibels (dB), and Total Harmonic Distortion is expressed as a percentage (%). The receiver offers multiple digital audio and video input options, along with the flexibility to connect external devices via USB.

General
BrandPioneer
ModelVSX-821-K | VSX-821-K
Productreceiver
EAN4988028133121
LanguageEnglish
FiletypeUser manual (PDF)
Audio
RMS rated power550 W
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Audio D/A Converter (DAC)24-bit/192kHz
Audio output channels5.1 channels
Power output per channel (20-20KHz@8 Ohm)130 W
Receiver typeSurround
Technical details
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:6, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Sleep timerYes
On Screen Display (OSD)Yes
Apple docking compatibilityNot supported
AirPlayNo
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
USB ports quantity1
Outputs
Multichannel audio output typeTerminals
Component video (YPbPr/YCbCr) out1
Number of HDMI outputs1
Headphone outputs7
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
File formats
Audio formats supportedAAC, MP3, WMA
Video formats supportedMPEG4
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9200 g
Width435 mm
Depth363 mm
Height168 mm
Network
Ethernet LANNo
Wi-FiNo
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)415 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-821-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a weight of 9200 g.

What is the height of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a height of 168 mm.

What is the width of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a width of 435 mm.

What is the depth of the Pioneer VSX-821-K?

The Pioneer VSX-821-K has a depth of 363 mm.

How do I connect my audio devices to the Pioneer VSX-821-K receiver?

Make sure to use the appropriate audio cables to connect your devices to the corresponding audio input ports on the back of the receiver. Ensure that the cables are securely plugged in for optimal sound quality.

How can I adjust the audio settings to enhance the sound experience?

Navigate through the receiver's on-screen menu to access the audio settings. From there, you can adjust parameters such as bass, treble, balance, and surround sound effects to customize your audio output according to your preferences.

How can I set up and configure the speaker system with the receiver?

Use the manual speaker setup guide to properly connect and place your speakers. The guide will provide step-by-step instructions on connecting the speakers to the receiver and configuring the appropriate speaker settings, such as speaker size, distance, and channel levels.

How do I set up and use the remote control properly?

Familiarize yourself with the remote control's layout and function buttons. The manual will explain how to pair the remote with the receiver and provide a detailed overview of all the available functions and commands to control various features of the Pioneer VSX-821-K.

How can I troubleshoot basic issues with the receiver?

The manual will provide troubleshooting tips to address common problems, such as audio distortion, no sound, or connectivity issues. It will guide you through potential solutions, including checking cable connections, power supply, and reset options, to help resolve any operational difficulties you may encounter.

Does the Pioneer VSX-821-K have a high RMS rated power?

No, the Pioneer VSX-821-K has a RMS rated power of 550W, which is relatively low compared to some other receivers on the market.

Is the Signal-to-Noise Ratio (SNR) of the Pioneer VSX-821-K good?

No, the Signal-to-Noise Ratio (SNR) of 79dB is not particularly high, meaning there may be some noticeable background noise while using this receiver.

Does the Pioneer VSX-821-K have low Total Harmonic Distortion (THD)?

Yes, the Total Harmonic Distortion (THD) of 0.05% is relatively low, indicating that the audio output should be fairly clean and accurate.

How many audio output channels does the Pioneer VSX-821-K have?

The Pioneer VSX-821-K has 5.1 channels for audio output, which allows for a surround sound experience.

How many HDMI inputs does the Pioneer VSX-821-K have?

The Pioneer VSX-821-K has 4 HDMI inputs, which provides ample connectivity options for various devices such as gaming consoles, Blu-ray players, and streaming devices.

Is the manual of the Pioneer VSX-821-K available in English?

Yes, the manual of the Pioneer VSX-821-K is available in English .

Is your question not listed? Ask your question here

No results