Pioneer VSX-820 manual

Pioneer VSX-820
8.4 · 12
PDF manual
 · 228 pages
English
manualPioneer VSX-820

Controls and displays02

10
En
PRESET /
Use to select preset radio stations
(page 49) and to select SIRIUS Radio
channels (page 66).
8
MASTER VOLUME
dial
9
PHONES
jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers (page 41).
10 Listening mode buttons
AUTO/DIRECT
Switches between Auto surround mode
(Auto playback on page 33) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 36).
STEREO/ALC
Switches between stereo playback, Auto
level control stereo mode (page 35) and
Front Stage Surround Advance modes
(page 35).
STANDARD
Press for Standard decoding and to switch
between the various 2 Pro Logic II, 2 Pro
Logic IIx, 2 Pro Logic IIz and NEO:6
options (page 32).
ADV SURROUND
Switches between the various surround
modes (page 34).
11
iPod iPhone DIRECT CONTROL
Change the receiver’s input to the iPod and
enable iPod operations on the iPod (page 60).
12
iPod iPhone/USB
terminal
Use to connect your Apple iPod or USB mass
storage device as an audio source (page 58
and page 61).
13
AUDIO/VIDEO
input
See Connecting to the front panel video terminal
on page 28.
14
MCACC SETUP MIC
jack
Use to connect a microphone when
performing Auto MCACC setup.

Operating range of remote control

The remote control may not work properly if:
There are obstacles between the remote
control and the receiver’s remote sensor.
Direct sunlight or fluorescent light is
shining onto the remote sensor.
The receiver is located near a device that is
emitting infrared rays.
The receiver is operated simultaneously
with another infrared remote control unit.
30°
7 m (23 ft.)
30°
VSX-820_UCSMXCN_En.book 10 ページ 2009年12月21日 月曜日 午後4時17分

View the manual for the Pioneer VSX-820 here, for free. This manual comes under the category receivers and has been rated by 12 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-820 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
S
stephen turkfeldJune 1, 2024

if i plug in just the receiver without connecting it to rest of system, should info display on front when i push power button?

A
André GagnéDecember 5, 2023

bonjour mon appareil pioner VSX-820 le son ne sort pas pour la tv mais bien branché sélection indique digital flache aussi 02 est indiquer

S
sterling jonesSeptember 11, 2022

How do I use the remote without opening my cabinet door?

The Pioneer VSX-820 is a 5.1 channel receiver with a signal-to-noise ratio of 98 dB and an impedance of 6 Ω. It features an equalizer for customizable sound, and has three component video inputs, two digital audio optical inputs, and one digital audio coaxial input for versatile connectivity options. Additionally, there is a 3.5 mm headphone jack for private listening. Weighing 9100 g, the Pioneer VSX-820 has a power consumption of 245 W (typical) and 0.45 W (standby). It has a power output of 110 W per channel, making it a powerful device for enhancing audio in a home theater setup. The device is suited for those who want a reliable and versatile receiver that can connect to a variety of sources. The Pioneer VSX-820 is constructed with premium materials, ensuring durability over time. The equalizer also allows for customized sound, giving users control over how their audio is processed. Overall, the Pioneer VSX-820 is a well-constructed, high-powered receiver with a range of input options and customizable sound options.

General
BrandPioneer
ModelVSX-820 | VSX-820-K
Productreceiver
EAN4988028109300
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
EqualizerYes
Product colorBlack
Display-
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
Handheld remote controlNo
Apple docking compatibilityNot supported
AirPlayNo
Audio
Frequency range5 - 100000 Hz
Signal-to-Noise Ratio (SNR)98 dB
Audio D/A Converter (DAC)24-bit/192kHz
Impedance6 Ω
Audio output channels5.1 channels
Power output per channel (20-20KHz@8 Ohm)110 W
Power output per channel (1KHz@6 Ohm)125 W
Receiver typeSurround
Inputs
Component video (YPbPr/YCbCr) in3
Digital audio optical in2
Digital audio coaxial in1
HDMI in4
Outputs
Headphone connectivity3.5 mm
Number of HDMI outputs1
Weight & dimensions
Weight9100 g
Width420 mm
Depth348 mm
Height158 mm
Power
Power consumption (typical)245 W
Power consumption (standby)0.45 W
Ports & interfaces
Speakers connectivity type-
Connectivity technologyWired
Network
Ethernet LANNo
Wi-FiNo
Radio
Supported radio bandsAM, FM
Preset stations quantity30
Optical drive
Optical drive includedNo
Storage
Card reader integratedNo
Video
3DYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-820 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-820?

The Pioneer VSX-820 has a weight of 9100 g.

What is the height of the Pioneer VSX-820?

The Pioneer VSX-820 has a height of 158 mm.

What is the width of the Pioneer VSX-820?

The Pioneer VSX-820 has a width of 420 mm.

What is the depth of the Pioneer VSX-820?

The Pioneer VSX-820 has a depth of 348 mm.

How do I connect my speakers to the Pioneer VSX-820 receiver?

To connect your speakers, ensure that the receiver is turned off. Then, locate the speaker terminals on the back of the receiver, match the positive (+) and negative (-) terminals on the receiver to the corresponding terminals on your speakers, and securely tighten the connections.

How can I set up the audio calibration on the receiver?

To calibrate your audio, access the receiver's setup menu by pressing the "Setup" button on the front panel or the remote control. From there, navigate to the "Audio" settings section, choose "Speaker Setup" or "Audio Calibration," and follow the on-screen prompts to optimize and fine-tune your audio settings.

How can I configure the surround sound options on the Pioneer VSX-820?

To configure surround sound options, access the receiver's setup menu and select the "Audio" or "Sound" settings. From there, locate the surround sound configuration options, which may include adjusting speaker distances, levels, crossover frequencies, and selecting different surround modes. Customize these settings according to your preferences.

How do I connect external devices such as a DVD player or gaming console to the receiver?

To connect external devices, locate the available input ports on the back of the receiver, such as HDMI, RCA, or optical inputs. Connect the corresponding cables from the external device to the respective input ports on the receiver. Ensure proper cable connections and select the correct input source on the receiver to activate the desired device.

How can I troubleshoot common audio issues on the Pioneer VSX-820?

If you encounter audio issues, start by checking the speaker connections, ensuring they are securely plugged in and the polarity is correct. Verify that the volume levels are adjusted appropriately and that the audio input source is properly selected. Additionally, you can try performing a factory reset on the receiver if all else fails.

Does the Pioneer VSX-820 have an equalizer?

Yes, the Pioneer VSX-820 has an equalizer. This allows the user to adjust and customize the audio settings to their preferences, ensuring optimal sound quality for their specific setup.

What is the signal-to-noise ratio of the Pioneer VSX-820?

The signal-to-noise ratio of the Pioneer VSX-820 is 98 dB. This indicates that the receiver has a high level of signal clarity and minimal background noise, resulting in a clean and immersive audio experience for the user.

What is the power output per channel of the Pioneer VSX-820 at 8 ohms?

The power output per channel of the Pioneer VSX-820 at 8 ohms is 110 W. This means that the receiver is capable of delivering a decent amount of power to each channel, allowing for a satisfying and impactful audio performance.

How many HDMI inputs does the Pioneer VSX-820 have?

The Pioneer VSX-820 has 4 HDMI inputs. This provides the user with ample connectivity options, allowing them to connect multiple devices such as gaming consoles, Blu-ray players, and streaming devices to the receiver.

What is the power consumption of the Pioneer VSX-820 in standby mode?

The power consumption of the Pioneer VSX-820 in standby mode is 0.45 W. This low power consumption ensures energy efficiency and helps to reduce electricity costs for the user.

Is the manual of the Pioneer VSX-820 available in English?

Yes, the manual of the Pioneer VSX-820 is available in English .

Is your question not listed? Ask your question here

No results