Pioneer VSX-534 manual

Pioneer VSX-534
8.4 · 8
PDF manual
 · 99 pages
English
manualPioneer VSX-534
21
Front Panel Rear Panel Remote

Contents

Connections

Playback

Setup

Speaker Connections and "Speaker Setup" Settings

Connections

(Note) Speaker Impedance

Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker
Impedance" to "4 ohms" for "Speaker Setup" in the Initial Setup section ( p83). When setting "Speaker Impedance" from the Setup menu, press on the remote
controller, and set "2. Speaker" - "Conguration" - "Speaker Impedance" ( p70) to "4 ohms".

Connect the Speaker Cables

1/2˝
(12 mm)
Make correct connection between the unit's jacks and speaker's jacks (+ side to + side, and - side to - side) for each channel. If the connection is wrong, a bass sound
will not be reproduced properly due to reverse phase. Twist the wires exposed from the tip of the speaker cable so that the wires do not stick out of the speaker terminal
when connecting. If the exposed wires touch the rear panel, or the + side and - side wires touch each other, a malfunction may occur.

View the manual for the Pioneer VSX-534 here, for free. This manual comes under the category receivers and has been rated by 8 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-534 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 34
D
DaveNovember 20, 2022

Can i use a Pioneer S-W3700-K subwoofer with this receiver? If so how? I doubt i can use it in the pre out.. please help

Can i use a Pioneer S-W3700-K subwoofer with this receiver? If so how? I doubt i can use it in the pre out.. please help
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

Yes, you can use the Pioneer S-W3700-K subwoofer with the Pioneer VSX-534 receiver. The receiver has a dedicated subwoofer pre-out connection, labeled as "SUBWOOFER PRE OUT" on the rear panel. Simply connect the subwoofer to this pre-out port using an RCA cable. Make sure to power on both the receiver and the subwoofer, and adjust the subwoofer settings on the receiver to optimize the sound output.

This answer is automatically generated
G
Gerd Zank February 8, 2024

New device Pioneer VSX 534-B, purchased on 02.02.2024, in the sound settings, 3rd DTS is skipped, no display of DTS in the SURR button operation field, audio formats of the input signals, the product description states that DTS is available. What is going wrong, does this device not meet the requirements?

New device Pioneer VSX 534-B, purchased on 02.02.2024, in the sound settings, 3rd DTS is skipped, no display of DTS in the SU...
zoom-in
View photo
This message has been automatically translated
J
Joe BorisJuly 31, 2022

My front speaker won’t work anymore! All my others do. At one point none of them worked but got back working

G
GaryJanuary 11, 2023

My tv turns on the receiver when I don't want it to. What do I need to set to stop this?

1 comment
C
compugridNovember 22, 2023

turn off ARC or CEC. play with 2 of the options. CEC and ARC is a handshake between yr TV and the avr

M
Mike DeMattiesSeptember 17, 2023

how to connect Bluetooth devices. When I press Bluetooth it says pairing but the device never connects. what am I missing??

J
Johnnie January 27, 2024

Ok..I bought a RCA bass speaker wire plugged it in the out bass speaker in back of unit..but get no bottom bass sound..am I doing something wrong?

S
SteveJanuary 28, 2024

Hi, we have a VSX-534 set up with our home theater. We've done the Mac pro settings but every time we turn the unit on the initial setup keeps coming up on the screen of the receiver. Can you tell us how to get rid of this or do the initial setup again so this doesn't happen?

E
Edris Padilla NunezMay 2, 2023

Can I use Height Speakers in a 5.1 Surround arrangement? If not, is there a virtual option for 5.1 setup?

R
Richard PerrySeptember 8, 2023

Turning the volume button to positive and negative stops at 80 where is positive stop at afraid to turn it up that loud

The Pioneer VSX-534 receiver is a versatile audio device that offers a range of features and functionalities. With its 5.1 channels of audio output, it provides a dynamic and immersive sound experience. Equipped with 40 preset stations, this receiver allows users to easily access their favorite radio channels. It supports both AM and FM radio bands, ensuring a wide range of station options for users. While it does not support AirPlay, the Pioneer VSX-534 does have a sleep timer feature that allows users to set a specific time for the receiver to automatically turn off. Volume control is accomplished through a rotary knob, providing a tactile and intuitive way to adjust sound levels. Additionally, a remote control is included, enabling convenient operation from a distance. The receiver features a graphical user interface (GUI), which enhances user interaction and makes navigation through settings and options effortless. Digital Signal Processing (DSP) technology is integrated into the Pioneer VSX-534, offering enhanced audio processing capabilities for improved sound quality. It also supports x.v.Color, allowing for vivid and lifelike color reproduction when connected to compatible devices. Furthermore, this receiver features Audio Return Channel (ARC) functionality, enabling audio to be sent from a compatible TV to the receiver through a single HDMI cable, simplifying connections and reducing cable clutter. In conclusion, the Pioneer VSX-534 receiver provides an array of features and capabilities, including 5.1 channel audio output, 40 preset stations, AM/FM radio support, a sleep timer, rotary volume control, a graphical user interface, Digital Signal Processing technology, x.v.Color support, and Audio Return Channel functionality. Its comprehensive set of features makes it a versatile and user-friendly audio device.

General
BrandPioneer
ModelVSX-534 | 299091
Productreceiver
EAN4573211154207
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Audio
Audio output channels5.1 channels
Audio D/A Converter (DAC)32-bit/384kHz
Power output per channel (1KHz@6 Ohm)150 W
Receiver typeSurround
Power output per channel (20-20KHz@8 Ohm)- W
Frequency range20 - 20000 Hz
Dynamic power per channel (3 Ohm)160 W
Dynamic power per channel (4 Ohm)125 W
Dynamic power per channel (8 Ohm)85 W
Total Harmonic Distortion (THD)0.08 %
Radio
Preset stations quantity40
Supported radio bandsAM, FM
FM band range87.5 - 108 MHz
AM band range530 - 1710 kHz
Radio Data System (RDS)Yes
Technical details
AirPlayNo
Sleep timerYes
Product colorBlack
Volume controlRotary
Handheld remote controlYes
Graphical user interface (GUI)Yes
Digital Signal Processing (DSP)Yes
Display-
Audio decodersDTS 96/24, DTS-ES, DTS-HD, DTS-HD Master Audio, DTS:X, Dolby Digital Plus, Dolby Surround, Dolby TrueHD
x.v.Color supportYes
Deep color supportYes
Audio Return Channel (ARC)Yes
Apple dockingNo
HDCPYes
HDCP version2.2
Auto standbyYes
Weight & dimensions
Width435 mm
Depth321 mm
Height148 mm
Weight8000 g
Video
Video upscalingYes
3DYes
Supported video modes480p, 576p, 720p, 1080i, 1080p, 2160p
Storage
Card reader integratedNo
Optical drive
Optical drive includedNo
Network
Ethernet LANNo
Wi-FiNo
BluetoothYes
Bluetooth version4.2
Bluetooth profilesA2DP, AVRCP, HFP, HSP, SPP
Bluetooth Low Energy (BLE)Yes
Ports & interfaces
Connectivity technologyWired
Speakers connectivity typeBinding post
FM antenna ports quantity1
AM antenna ports quantity1
Outputs
Headphone outputs1
Number of HDMI outputs1
Inputs
USB ports quantity1
PC Audio inYes
Digital audio coaxial in1
Digital audio optical in1
HDMI in4
Packaging content
Batteries includedYes
FM antennaYes
AM antennaYes
User guideYes
Power
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)465 W
Power consumption (standby)0.2 W
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-534 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-534?

The Pioneer VSX-534 has a weight of 8000 g.

What is the height of the Pioneer VSX-534?

The Pioneer VSX-534 has a height of 148 mm.

What is the width of the Pioneer VSX-534?

The Pioneer VSX-534 has a width of 435 mm.

What is the depth of the Pioneer VSX-534?

The Pioneer VSX-534 has a depth of 321 mm.

How can I connect my speakers to the Pioneer VSX-534 receiver?

To connect your speakers to the receiver, locate the speaker terminals on the back of the unit. Insert the positive (+) and negative (-) ends of each speaker wire into the corresponding terminals, ensuring a secure connection for optimal sound quality.

What is the maximum power output of the Pioneer VSX-534 receiver?

The Pioneer VSX-534 receiver has a maximum power output of 80 Watts per channel, allowing you to enjoy immersive audio experiences with your speakers.

How can I use the built-in Bluetooth feature of the Pioneer VSX-534 receiver?

To utilize the Bluetooth feature, first ensure that the receiver is in the Bluetooth mode. Enable Bluetooth on your device (e.g., smartphone) and search for available devices. Select "Pioneer VSX-534" from the list, and once paired, you can wirelessly stream audio to the receiver.

Is it possible to control the Pioneer VSX-534 receiver using a smartphone or tablet?

Yes, you can control the receiver using your smartphone or tablet by downloading the Pioneer Remote App. Connect your device to the same network as the receiver, open the app, and follow the instructions to access various functions and settings conveniently.

How can I set up the automatic speaker calibration feature of the Pioneer VSX-534 receiver?

The receiver features an automatic MCACC (Multi-Channel Acoustic Calibration System) function. With the included microphone, position it at your primary listening location and follow the on-screen instructions to begin the calibration process. This ensures optimal sound output tailored to your specific room environment and speaker setup.

Does the Pioneer VSX-534 have support for AirPlay?

No, the Pioneer VSX-534 does not support AirPlay. This means that users will not be able to stream audio wirelessly from their iOS devices to the receiver.

Is the Pioneer VSX-534 equipped with a sleep timer?

Yes, the Pioneer VSX-534 comes with a sleep timer. This feature allows users to set a specific time for the receiver to automatically turn off, providing convenience and energy savings.

Does the Pioneer VSX-534 have a remote control included?

Yes, the Pioneer VSX-534 comes with a remote control included. This allows users to easily control the receiver's functions from a distance, providing convenience and flexibility.

Does the Pioneer VSX-534 support video upscaling?

Yes, the Pioneer VSX-534 supports video upscaling. This means that it can enhance the resolution of lower-quality video sources to match the capabilities of a higher-resolution display, providing a better viewing experience.

Does the Pioneer VSX-534 support 3D content?

Yes, the Pioneer VSX-534 supports 3D content. This means that users can enjoy a more immersive entertainment experience by connecting compatible 3D devices to the receiver.

Is the manual of the Pioneer VSX-534 available in English?

Yes, the manual of the Pioneer VSX-534 is available in English .

Is your question not listed? Ask your question here

No results