Pioneer VSX-528 manual

Pioneer VSX-528
8.2 · 11
PDF manual
 · 71 pages
English
manualPioneer VSX-528
Connecting your equipment
2
2
16
65
7
4
Turning on/off the device connected to this unit’s HDMI OUT terminal during playback, or disconnecting/connecting the HDMI cable during playback, may cause noise or interrupted audio.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.“x.v.Color” and are trademarks of Sony Corporation.
Analog audio cables
Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals.
Digital audio cables
Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver.
Note
When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.
When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.
You can also use a standard RCA video cable for coaxial digital connections.
Video cables
Standard RCA video cablesThese cables are the most common type of video connection and are used to connect to the composite video terminals. The yellow plugs distinguish them from cables for audio.Component video cables (VSX-828 only)Use component video cables to get the best possible color reproduction of your video source. The color signal of the TV is
divided into the luminance (Y) signal and the color (P
B and PR) signals and then output. In this way, interference between the signals is avoided.
About video outputs connection
This receiver is not loaded with a video converter. When you use HDMI cables for connecting to the input device, the same cables should be used for connecting to the TV.The signals input from the analog (composite) video inputs of this unit will not be output from the HDMI OUT terminal.
®
AUDIO
L
R
Red (Right)White (Left)
COAXIAL
IN
OPTICAL
IN
Coaxial digital audio cableOptical cable
VIDEO
Yellow
Y
P
B
P
R
COMPONENT VIDEO
VIDEOVIDEO
IN
IN
HDMI
MONITOR
OUT
HDMI
OUT
Terminal for connection with source deviceTerminal for connection with TV monitorPlayback component
TV
The OSD will not appear.Video signals can be output.
VSX-828_SYXE8_En.book 16 ページ 2013年3月1日 金曜日 午前9時16分

View the manual for the Pioneer VSX-528 here, for free. This manual comes under the category receivers and has been rated by 11 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-528 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
J
Jaime ngabu cabreroAugust 17, 2020

Can I connect a subwoofer and place 5 speakers without causing them to burn out, but the question is how much power can I give the subwoofer? In the other message, I didn't explain myself well.

This message has been automatically translated
H
Henry MapalaAugust 8, 2016

I bought my Pioneer VSX -528 last year, 2015. Suddenly the surround and center speaker channels have stopped working.What could be the problem?

H
Horst GuntherMarch 23, 2017

how do I connect my Pioneer VSX -528 receiver to the free Tv antenna so that I can watch free TV through my projector on my big screen I have the receiver connected to DVD and Telstra video and the home screen is working well

R
Ray Farrugia January 23, 2024

What type of Bluetooth adapter can I use on a pioneer vsx528?

J
JohnSeptember 11, 2022

My receiver has suddenly stopped playing in stereo, mono sound is fine

A
ArturOctober 8, 2014

How do i connect vinyl player ?

The Pioneer VSX-528 is a receiver that offers a range of audio features for a home theater setup. This receiver is designed to deliver high-quality sound and provide users with an enhanced audio experience. One of the key features of the Pioneer VSX-528 is its ability to support multiple channels of audio. With its 5.1 channel configuration, this receiver can deliver surround sound for a more immersive viewing experience. The Pioneer VSX-528 also offers a variety of audio formats, including Dolby Digital, DTS, and PCM. These formats allow for compatibility with different types of audio sources, ensuring that users can enjoy their favorite movies, music, and games with optimal audio quality. In terms of connectivity, the Pioneer VSX-528 offers a range of options. It includes multiple HDMI inputs and outputs, allowing users to easily connect their devices to the receiver. Additionally, it offers USB ports, allowing users to play media directly from a USB device. The Pioneer VSX-528 also features advanced audio settings, such as equalizer controls and audio calibration. These settings allow users to customize their audio experience to their preferences and ensure that the sound is optimized for their specific room setup. Overall, the Pioneer VSX-528 is a receiver that provides users with a range of audio features and connectivity options. With its ability to support multiple channels of audio and its compatibility with various formats, this receiver is a suitable choice for those looking to enhance their home theater system's audio capabilities.

General
BrandPioneer
ModelVSX-528
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-528 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I adjust the volume on my Pioneer VSX-528 receiver?

To adjust the volume on your Pioneer VSX-528 receiver, simply turn the volume dial located on the front panel of the receiver in a clockwise or counterclockwise direction.

How can I connect my TV to the Pioneer VSX-528 receiver?

To connect your TV to the Pioneer VSX-528 receiver, locate the HDMI output port on your receiver and connect it to the HDMI input port on your TV using an HDMI cable. Make sure to select the corresponding input on your TV to enable the audio and video output from your receiver.

How do I set up and control the surround sound speakers on the Pioneer VSX-528 receiver?

To set up and control the surround sound speakers on your Pioneer VSX-528 receiver, navigate to the speaker settings menu using the receiver's on-screen display or front panel controls. From there, you can specify the speaker layout, adjust individual speaker levels, and customize the listening experience based on your preferences.

What is the best audio mode to use for watching movies on the Pioneer VSX-528 receiver?

For an immersive movie-watching experience, the recommended audio mode on your Pioneer VSX-528 receiver is Dolby Digital or Dolby Digital Plus. These modes provide enhanced surround sound decoding and reproduction, optimizing the audio quality to match the movie soundtrack.

How can I program my remote control to work with other devices?

To program your remote control to work with other devices, access the remote control setup menu on your Pioneer VSX-528 receiver. Follow the on-screen instructions to select the device type (e.g., TV, Blu-ray player) and enter the corresponding code, which can be found in the receiver's user manual. Once programmed, you can use the remote control to operate multiple devices simultaneously.

Is the manual of the Pioneer VSX-528 available in English?

Yes, the manual of the Pioneer VSX-528 is available in English .

Is your question not listed? Ask your question here

No results