Pioneer VSX-527 manual

Pioneer VSX-527
8 · 21
PDF manual
 · 68 pages
English
manualPioneer VSX-527

Additional information

10
10
66

About messages displayed when using

network functions

Refer to the following information when you come up with a
status message while operating the Network functions.

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the
factory default. Use the front panel controls to do this.
For instructions on resetting the network connection
settings, see Factory Reset
on page 43.
1
Switch the receiver into standby.
2
While holding down
BAND
, press and hold
STANDBY/ON
for about two seconds.
3
When you see RESET? appear in the display, press
AUTO SURROUND/STREAM DIRECT
.
OK? shows in the display.
4
Press
ALC/STANDARD SURR
to confirm.
OK appears in the display to indicate that the receiver
has been reset to the factory default settings.
Important
If the Control with HDMI function is set to ON, you may not
be able to reset the unit. In this case, reset either by turning
OFF the Control with HDMI function, or by putting the unit
into standby mode by turning off the power of all the
connected devices, and resetting after the HDMI indicator
on the front panel turns off.

Cleaning the unit

Use a polishing cloth or dry cloth to wipe off dust and dirt.
When the surface is dirty, wipe with a soft cloth dipped in
some neutral cleanser diluted five or six times with water,
and wrung out well, and then wipe again with a dry cloth.
Do not use furniture wax or cleansers.
Never use thinners, benzine, insecticide sprays or other
chemicals on or near this unit, since these will corrode the
surface.
Status messages Descriptions
Connection Down The selected category or Internet radio
station cannot be accessed.
File Format Error Cannot be played back for some
reasons.
Track Not Found The selected song has not been found
anywhere on the network.
Server Error The selected server cannot be accessed.
Server Disconnected The server has been disconnected.
Empty There are no files stored in the selected
folder.
License Error The license for the contents to be played
back is invalid.
Item Already Exists This is displayed when the file you have
attempted to register in the Favorites
folder has already been registered.
Favorite List Full This is displayed when you have
attempted to register a file in the
Favorites folder but the Favorites folder is
already full.
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic”, “Surround EX”, and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents
issued & pending. DTS-HD, the Symbol, & DTS-HD and the
Symbol together are registered trademarks & DTS-HD Master
Audio is a trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.

View the manual for the Pioneer VSX-527 here, for free. This manual comes under the category receivers and has been rated by 21 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-527 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
L
LubosJune 9, 2022

Dobrý den, nejde mi na dálkovém ovladači zvyšovat či snižovat hlasitost u vsx-527. prosím o radu. děkuji

B
BudimirMarch 2, 2023

How to connect turntable with av receiver Pioneer 525.Whic port is for connection with turntable. Thank you.

R
Richard April 12, 2015

Hello, can you please forward a PDF copy of the Pioneer VSX-527 to the above email address. Thankyou, Richard

F
fredOctober 1, 2022

can i connect a turntable to this amp? if so, how???

N
N.pooleNovember 13, 2017

How do I switch on dots 5.1 surround sound

G
GOH MAY FERNFebruary 29, 2024

do pioneer vsx 527 suuport hdmi arc?

The Pioneer VSX-527 is a receiver that offers a range of features to enhance the audio experience. It is designed to deliver clear and balanced sound quality, providing an immersive listening experience. The receiver supports various audio formats, including Dolby Digital and DTS, allowing for a realistic and dynamic surround sound experience. It also has a built-in amplifier, providing sufficient power for a wide range of speakers. With multiple HDMI inputs, the Pioneer VSX-527 allows for easy connectivity of various devices, such as Blu-ray players and gaming consoles. It also features an HDMI output, enabling seamless connection to a compatible TV or projector. The receiver offers a user-friendly interface, allowing for easy navigation and control. It features an intuitive remote control, ensuring convenient operation from a distance. Additionally, it is equipped with an on-screen display, providing clear and informative visuals. The Pioneer VSX-527 includes advanced audio calibration technology, enabling automatic speaker setup and optimization. This ensures optimal audio performance in any listening environment. Moreover, the receiver offers support for multi-zone audio, allowing for the distribution of audio throughout the house. This feature enables users to enjoy music in multiple rooms, providing a seamless and synchronized audio experience. Overall, the Pioneer VSX-527 is a feature-rich receiver that delivers high-quality audio performance and offers convenient connectivity options. It is a reliable and durable choice for those seeking an enhanced home audio experience.

General
BrandPioneer
ModelVSX-527
Productreceiver
EAN4988028163579, 4988028181078
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-527 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer VSX-527 receiver to my TV?

Ensure you have an HDMI cable, then connect one end to the HDMI output on the receiver and the other end to the HDMI input on your TV. Make sure to select the corresponding HDMI input on your TV for audio and video playback.

What is the optimal speaker setup for my Pioneer VSX-527?

For an ideal surround sound experience, position your speakers in a 5.1-channel configuration. Place two front speakers at equal distances from the TV, a center speaker above or below the TV, two surround speakers to your sides, and a subwoofer for deep bass near the front speakers.

How can I adjust the bass and treble settings on my Pioneer VSX-527?

To adjust the audio characteristics, go to the receiver's menu, select the "Sound" or "Audio" option, and then look for the "Tone Control" settings. From there, you can fine-tune the bass and treble levels to match your preferences.

Why is there no sound coming from my Pioneer VSX-527 receiver?

First, make sure your speakers are properly connected to the receiver. Then, verify that the receiver is set to the correct audio input and that the volume is turned up. Additionally, ensure that no mute function is activated and that the speaker wires are not damaged or disconnected.

How can I set up and use the built-in radio tuner on my Pioneer VSX-527?

To set up the radio tuner, connect the FM antenna to the dedicated FM antenna port on the back of the receiver. Then, press the "Tuner" button on the receiver's remote control to access the radio mode. Use the channel buttons or the tuning knob to search for and select your desired radio stations.

Is the manual of the Pioneer VSX-527 available in English?

Yes, the manual of the Pioneer VSX-527 is available in English .

Is your question not listed? Ask your question here

No results