Pioneer VSX-527 manual

Pioneer VSX-527
8 · 21
PDF manual
 · 68 pages
English
manualPioneer VSX-527

Home Menu

7
7
48
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Setting’ from the Manual SP Setup
menu.
3
Choose the set of speakers that you want to set then
select a speaker size.
Use
/
to select the size (and number) of each of the
following speakers:
Front – Select LARGE if your front speakers reproduce bass
frequencies effectively, or if you didn’t connect a
subwoofer. Select SMALL to send the bass frequencies to
the subwoofer.
Center – Select LARGE if your center speaker reproduces
bass frequencies effectively, or select SMALL to send bass
frequencies to the other speakers or subwoofer. If you
didn’t connect a center speaker, choose NO (the center
channel is sent to the other speakers).
Front Height – Select LARGE if your front height speakers
reproduce bass frequencies effectively. Select SMALL to
send bass frequencies to the other speakers or subwoofer.
If you didn’t connect front height speakers choose NO.
-
You can only adjust the Front Height setting when Pre
Out Setting is set to Height.
Surr – Select LARGE if your surround speakers reproduce
bass frequencies effectively. Select SMALL to send bass
frequencies to the other speakers or subwoofer. If you
didn’t connect surround speakers choose NO (the sound of
the surround channels is sent to the other speakers).
Surr. Back – Select the number of surround back speakers
you have (one, two or none). Select LARGE if your surround
back speakers reproduce bass frequencies effectively.
Select SMALL to send bass frequencies to the other
speakers or subwoofer. If you didn’t connect surround back
speakers choose NO.
-
VSX-527 only: You can only adjust the Surr. Back setting
when Pre Out Setting is set to Surr. Back.
-
VSX-527 only: If you select one surround back speaker
only, make sure that additional amplifier is hooked up to
the PRE OUT L (Single) terminal.
-
VSX-827 only: When using only one surround back
speaker, connect it to the SURROUND BACK L (Single)
terminals.
Subwoofer – LFE signals and bass frequencies of
channels set to SMALL are output from the subwoofer
when YES is selected (see notes below). Choose the PLUS
setting if you want the subwoofer to output bass sound
continuously or you want deeper bass (the bass
frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you did
not connect a subwoofer choose NO (the bass frequencies
are output from other speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
Note
If you select SMALL for the front speakers, the subwoofer
will automatically be fixed to YES. Also, the center,
surround, surround back and front height speakers can’t
be set to LARGE if the front speakers are set to SMALL. In
this case, all bass frequencies are sent to the subwoofer.
If the surround speakers are set to NO, the surround back
speakers will automatically be set to NO.
If you have a subwoofer and like lots of bass, it may seem
logical to select LARGE for your front speakers and PLUS
for the subwoofer. This may not, however, yield the best
bass results. Depending on the speaker placement of your
room you may actually experience a decrease in the
amount of bass due to low frequency cancellations. In this
case, try changing the position or direction of speakers. If
you can’t get good results, listen to the bass response with
it set to PLUS and YES or the front speakers set to LARGE
and SMALL alternatively and let your ears judge which
sounds best. If you’re having problems, the easiest option
is to route all the bass sounds to the subwoofer by selecting
SMALL for the front speakers.
X.Over
Default setting: 100Hz
This setting decides the cutoff between bass sounds playing
back from the speakers selected as LARGE, or the subwoofer,
and bass sounds playing back from those selected as SMALL.
It also decides where the cutoff will be for bass sounds in the
LFE channel.
For more on selecting the speaker sizes, see Speaker Setting
on page 47.
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘X.Over’ from the Manual SP Setup menu.
3
Choose the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
2
. Manual SP Setup
Return
a
. Speaker Setting
b
. X.Over
c
. Channel Level
d
. Speaker Distance
2a
. Speaker Setting
Front
Center
Surr
Surr. Back
Subwoofer:
Return
[ SMALL ]
[ SMALL ]
[ NO
]
YES
SMALL
2
. Manual SP Setup
Return
a
. Speaker Setting
b
. X.Over
c
. Channel Level
d
. Speaker Distance
2b
. X.Over
Return
Frequency 100Hz

View the manual for the Pioneer VSX-527 here, for free. This manual comes under the category receivers and has been rated by 21 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-527 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
L
LubosJune 9, 2022

Dobrý den, nejde mi na dálkovém ovladači zvyšovat či snižovat hlasitost u vsx-527. prosím o radu. děkuji

B
BudimirMarch 2, 2023

How to connect turntable with av receiver Pioneer 525.Whic port is for connection with turntable. Thank you.

R
Richard April 12, 2015

Hello, can you please forward a PDF copy of the Pioneer VSX-527 to the above email address. Thankyou, Richard

F
fredOctober 1, 2022

can i connect a turntable to this amp? if so, how???

N
N.pooleNovember 13, 2017

How do I switch on dots 5.1 surround sound

G
GOH MAY FERNFebruary 29, 2024

do pioneer vsx 527 suuport hdmi arc?

The Pioneer VSX-527 is a receiver that offers a range of features to enhance the audio experience. It is designed to deliver clear and balanced sound quality, providing an immersive listening experience. The receiver supports various audio formats, including Dolby Digital and DTS, allowing for a realistic and dynamic surround sound experience. It also has a built-in amplifier, providing sufficient power for a wide range of speakers. With multiple HDMI inputs, the Pioneer VSX-527 allows for easy connectivity of various devices, such as Blu-ray players and gaming consoles. It also features an HDMI output, enabling seamless connection to a compatible TV or projector. The receiver offers a user-friendly interface, allowing for easy navigation and control. It features an intuitive remote control, ensuring convenient operation from a distance. Additionally, it is equipped with an on-screen display, providing clear and informative visuals. The Pioneer VSX-527 includes advanced audio calibration technology, enabling automatic speaker setup and optimization. This ensures optimal audio performance in any listening environment. Moreover, the receiver offers support for multi-zone audio, allowing for the distribution of audio throughout the house. This feature enables users to enjoy music in multiple rooms, providing a seamless and synchronized audio experience. Overall, the Pioneer VSX-527 is a feature-rich receiver that delivers high-quality audio performance and offers convenient connectivity options. It is a reliable and durable choice for those seeking an enhanced home audio experience.

General
BrandPioneer
ModelVSX-527
Productreceiver
EAN4988028163579, 4988028181078
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-527 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer VSX-527 receiver to my TV?

Ensure you have an HDMI cable, then connect one end to the HDMI output on the receiver and the other end to the HDMI input on your TV. Make sure to select the corresponding HDMI input on your TV for audio and video playback.

What is the optimal speaker setup for my Pioneer VSX-527?

For an ideal surround sound experience, position your speakers in a 5.1-channel configuration. Place two front speakers at equal distances from the TV, a center speaker above or below the TV, two surround speakers to your sides, and a subwoofer for deep bass near the front speakers.

How can I adjust the bass and treble settings on my Pioneer VSX-527?

To adjust the audio characteristics, go to the receiver's menu, select the "Sound" or "Audio" option, and then look for the "Tone Control" settings. From there, you can fine-tune the bass and treble levels to match your preferences.

Why is there no sound coming from my Pioneer VSX-527 receiver?

First, make sure your speakers are properly connected to the receiver. Then, verify that the receiver is set to the correct audio input and that the volume is turned up. Additionally, ensure that no mute function is activated and that the speaker wires are not damaged or disconnected.

How can I set up and use the built-in radio tuner on my Pioneer VSX-527?

To set up the radio tuner, connect the FM antenna to the dedicated FM antenna port on the back of the receiver. Then, press the "Tuner" button on the receiver's remote control to access the radio mode. Use the channel buttons or the tuning knob to search for and select your desired radio stations.

Is the manual of the Pioneer VSX-527 available in English?

Yes, the manual of the Pioneer VSX-527 is available in English .

Is your question not listed? Ask your question here

No results