Pioneer VSX-527 manual

Pioneer VSX-527
8 · 21
PDF manual
 · 68 pages
English
manualPioneer VSX-527

Listening to your system

5
5
36

Better sound using Phase Control

This receiver’s Phase Control feature uses phase correction
measures to make sure your sound source arrives at the
listening position in phase, preventing unwanted distortion
and/or coloring of the sound.
Phase Control technology provides coherent sound
reproduction through the use of phase matching for an
optimal sound image at your listening position. The default
setting is on and we recommend leaving Phase Control
switched on for all sound sources.
While listening to a source, press , then press
PHASE
to switch the P.CTL (Phase Control) ON or OFF.
Note
Phase matching is a very important factor in achieving
proper sound reproduction. If two waveforms are ‘in phase’,
they crest and trough together, resulting in increased
amplitude, clarity and presence of the sound signal. If a
crest of a wave meets a trough, then the sound will be ‘out
of phase’ and an unreliable sound image will be produced.
If your subwoofer has a phase control switch, set it to the
plus (+) sign (or 0°). However, the effect you can actually
feel when Phase Control is set to ON on this receiver
depends on the type of your subwoofer. Set your subwoofer
to maximize the effect. It is also recommended you try
changing the orientation or the place of your subwoofer.
Set the built-in lowpass filter switch of your subwoofer to
OFF. If this cannot be done on your subwoofer, set the
cutoff frequency to a higher value.
If the speaker distance is not properly set, you may not have
a maximized Phase Control effect.
The Phase Control mode cannot be set to ON in the
following cases:
-
When the PURE DIRECT mode is switched on.
-
When the headphones are connected.

Using surround back channel processing

You can have the receiver automatically use 6.1 or 7.1
decoding for 6.1 encoded sources (for example, Dolby Digital
EX or DTS-ES), or you can choose to always use 6.1 or 7.1
decoding (for example, with 5.1 encoded material). With 5.1
encoded sources, a surround back channel will be generated,
but the material may sound better in the 5.1 format for which
it was originally encoded (in which case, you can simply
switch surround back channel processing off).
With a 7.1-channel surround system, audio signals that
have undergone matrix decoding processing through
surround back channel processing to which the Up Mix
function is added are output from the surround back
speakers.
Press , then press
SB CH
repeatedly to cycle
the surround back channel options.
Each press cycles through the options as follows:
SB ON – Matrix decoding processing for generating
the surround back component from the surround
component is turned on.
SB AUTO – Matrix decoding processing for generating
the surround back component from the surround
component is switched automatically. Matrix
decoding processing is only performed when surround
back channel signals are detected in the input signals.
SB OFF – Matrix decoding processing for generating
the surround back component from the surround
component is turned off.

Setting the Up Mix function

In a 7.1-channel surround system with surround speakers
placed directly at the sides of the listening position, the
surround sound of 5.1-channel sources is heard from the side.
The Up Mix function mixes the sound of the surround
speakers with the surround back speakers so that the
surround sound is heard from diagonally to the rear as it
should be.
Using the Up Mix function is effective when the speakers in
the 7.1-channel surround system are set up as
recommended in the example on page 11
.
Depending on the positions of the speakers and the sound
source, in some cases it may not be possible to achieve
good results. In this case, set the setting to OFF.
1
Switch the receiver into standby.
2
While holding down
PRESET
on the front panel, and
hold the
STANDBY/ON
for about two seconds.
UP MIX: OFF appears and the Up Mix function turns off.
If you want to turn this function on, perform steps 1 and
2 again.
When set to ON, the (Up Mix) indicator on the front
panel lights.
Note
Set to ON regardless of this setting when playing DTS-HD
signals.
May automatically be set to OFF even when set to ON,
depending on the input signal and listening mode.
If the Network Standby is set to ON, you may not be able
to set the Up Mix function.
SLEEP
INPUT
RECEIVER
SOURCE
1
4
7
2
5
8
DISP
CLR
3
6
9
0
ENTER
CH
CH
SHIFT
RECEIVER
SLEEP
INPUT
RECEIVER
SOURCE
1
4
7
2
5
8
DISP
CLR
3
6
9
0
ENTER
CH
CH
SHIFT
RECEIVER
C
SW
L R
SL SR
SBL SBR SBL SBR
C
SW
L R
SL SR
UP MIX OFF UP MIX ON

View the manual for the Pioneer VSX-527 here, for free. This manual comes under the category receivers and has been rated by 21 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-527 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
L
LubosJune 9, 2022

Dobrý den, nejde mi na dálkovém ovladači zvyšovat či snižovat hlasitost u vsx-527. prosím o radu. děkuji

B
BudimirMarch 2, 2023

How to connect turntable with av receiver Pioneer 525.Whic port is for connection with turntable. Thank you.

R
Richard April 12, 2015

Hello, can you please forward a PDF copy of the Pioneer VSX-527 to the above email address. Thankyou, Richard

F
fredOctober 1, 2022

can i connect a turntable to this amp? if so, how???

N
N.pooleNovember 13, 2017

How do I switch on dots 5.1 surround sound

G
GOH MAY FERNFebruary 29, 2024

do pioneer vsx 527 suuport hdmi arc?

The Pioneer VSX-527 is a receiver that offers a range of features to enhance the audio experience. It is designed to deliver clear and balanced sound quality, providing an immersive listening experience. The receiver supports various audio formats, including Dolby Digital and DTS, allowing for a realistic and dynamic surround sound experience. It also has a built-in amplifier, providing sufficient power for a wide range of speakers. With multiple HDMI inputs, the Pioneer VSX-527 allows for easy connectivity of various devices, such as Blu-ray players and gaming consoles. It also features an HDMI output, enabling seamless connection to a compatible TV or projector. The receiver offers a user-friendly interface, allowing for easy navigation and control. It features an intuitive remote control, ensuring convenient operation from a distance. Additionally, it is equipped with an on-screen display, providing clear and informative visuals. The Pioneer VSX-527 includes advanced audio calibration technology, enabling automatic speaker setup and optimization. This ensures optimal audio performance in any listening environment. Moreover, the receiver offers support for multi-zone audio, allowing for the distribution of audio throughout the house. This feature enables users to enjoy music in multiple rooms, providing a seamless and synchronized audio experience. Overall, the Pioneer VSX-527 is a feature-rich receiver that delivers high-quality audio performance and offers convenient connectivity options. It is a reliable and durable choice for those seeking an enhanced home audio experience.

General
BrandPioneer
ModelVSX-527
Productreceiver
EAN4988028163579, 4988028181078
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-527 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer VSX-527 receiver to my TV?

Ensure you have an HDMI cable, then connect one end to the HDMI output on the receiver and the other end to the HDMI input on your TV. Make sure to select the corresponding HDMI input on your TV for audio and video playback.

What is the optimal speaker setup for my Pioneer VSX-527?

For an ideal surround sound experience, position your speakers in a 5.1-channel configuration. Place two front speakers at equal distances from the TV, a center speaker above or below the TV, two surround speakers to your sides, and a subwoofer for deep bass near the front speakers.

How can I adjust the bass and treble settings on my Pioneer VSX-527?

To adjust the audio characteristics, go to the receiver's menu, select the "Sound" or "Audio" option, and then look for the "Tone Control" settings. From there, you can fine-tune the bass and treble levels to match your preferences.

Why is there no sound coming from my Pioneer VSX-527 receiver?

First, make sure your speakers are properly connected to the receiver. Then, verify that the receiver is set to the correct audio input and that the volume is turned up. Additionally, ensure that no mute function is activated and that the speaker wires are not damaged or disconnected.

How can I set up and use the built-in radio tuner on my Pioneer VSX-527?

To set up the radio tuner, connect the FM antenna to the dedicated FM antenna port on the back of the receiver. Then, press the "Tuner" button on the receiver's remote control to access the radio mode. Use the channel buttons or the tuning knob to search for and select your desired radio stations.

Is the manual of the Pioneer VSX-527 available in English?

Yes, the manual of the Pioneer VSX-527 is available in English .

Is your question not listed? Ask your question here

No results