Pioneer VSX-527 manual

Pioneer VSX-527
8 · 21
PDF manual
 · 68 pages
English
manualPioneer VSX-527

Basic playback

4
4
32

Listening to the radio

The following steps show you how to tune in to FM and AM
radio broadcasts using the automatic (search) and manual
(step) tuning functions. Once you are tuned to a station you
can memorize the frequency for recall later—see Saving
station presets below for more on how to do this.
1
Press
TUNER
to select the tuner.
2
Use
BAND
to change the band (FM or AM), if necessary.
Each press switches the band between FM (stereo or
mono) and AM.
3
Tune to a station.
There are three ways to do this:
Automatic tuning
To search for stations in the currently selected band,
press and hold
TUNE
/
for about a second. The
receiver will start searching for the next station, stopping
when it has found one. Repeat to search for other
stations.
Manual tuning
To change the frequency one step at a time, press
TUNE
/
.
High speed tuning
Press and hold
TUNE
/
for high speed tuning.
Release the button at the frequency you want.
Improving FM sound
If the TUNE or ST indicators don’t light when tuning to an FM
station because the signal is weak, set the receiver to the
mono reception mode.
Press
BAND
to select FM MONO.
This should improve the sound quality and allow you to
enjoy the broadcast.
Saving station presets
If you often listen to a particular radio station, it’s convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station. This saves the
effort of manually tuning in each time. This unit can memorize
up to 30 stations.
1
Tune to a station you want to memorize.
See Listening to the radio above for more on this.
2
Press
TOOLS
.
The display shows PRESET, then a blinking MEM and
station preset.
3
Press
PRESET
/
to select the station preset you
want.
You can also use the number buttons.
4
Press
ENTER
.
The preset number stop blinking and the receiver stores
the station.
Note
If the receiver is left disconnected from the AC power outlet
for over a month, the station memories will be lost and will
have to be reprogrammed.
Stations are stored in stereo. When the station is stored in
the FM MONO mode, it shows as ST when recalled.
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets
above if you haven’t done this already.
Press
PRESET
/
to select the station preset you
want.
You can also use the number buttons on the remote
control to recall the station preset.
Naming preset stations
For easier identification, you can name all of your preset
stations.
1
Choose the station preset you want to name.
See Listening to station presets above for how to do this.
2
Press
TOOLS
twice.
The cursor at the first character position is blinking on
the display.
3
Input the name you want.
Choose a name up to eight characters long.
Use
PRESET
/
to select character position.
Use
TUNE
/
to select characters.
The name is stored when
ENTER
is pressed.
Tip
To erase a station name, follow steps 1 and 2, and press
ENTER
while the display is blank. Press
TOOLS
while the
display is blank, to keep the previous name.
Once you have named a station preset, Press
DISP
to show
the name. When you want to return to the frequency
display, press
DISP
several times to show the frequency.
ENTER
MUTE
AUDIO
PARAMETER
MENU
HOME
MENU
TOOLS
iPod CTRL
PTY
TOP
MENU
P
R
E
S
E
T
P
R
E
S
E
T
1
ENTER
2
DISP
3
MUTE
AUDIO
PARAMETER
HOME
MENU
iPod CTRL
PTY
TOP
MENU
SLEEP
INPUT
RECEIVER
SOURCE

View the manual for the Pioneer VSX-527 here, for free. This manual comes under the category receivers and has been rated by 21 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-527 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
L
LubosJune 9, 2022

Dobrý den, nejde mi na dálkovém ovladači zvyšovat či snižovat hlasitost u vsx-527. prosím o radu. děkuji

B
BudimirMarch 2, 2023

How to connect turntable with av receiver Pioneer 525.Whic port is for connection with turntable. Thank you.

R
Richard April 12, 2015

Hello, can you please forward a PDF copy of the Pioneer VSX-527 to the above email address. Thankyou, Richard

F
fredOctober 1, 2022

can i connect a turntable to this amp? if so, how???

N
N.pooleNovember 13, 2017

How do I switch on dots 5.1 surround sound

G
GOH MAY FERNFebruary 29, 2024

do pioneer vsx 527 suuport hdmi arc?

The Pioneer VSX-527 is a receiver that offers a range of features to enhance the audio experience. It is designed to deliver clear and balanced sound quality, providing an immersive listening experience. The receiver supports various audio formats, including Dolby Digital and DTS, allowing for a realistic and dynamic surround sound experience. It also has a built-in amplifier, providing sufficient power for a wide range of speakers. With multiple HDMI inputs, the Pioneer VSX-527 allows for easy connectivity of various devices, such as Blu-ray players and gaming consoles. It also features an HDMI output, enabling seamless connection to a compatible TV or projector. The receiver offers a user-friendly interface, allowing for easy navigation and control. It features an intuitive remote control, ensuring convenient operation from a distance. Additionally, it is equipped with an on-screen display, providing clear and informative visuals. The Pioneer VSX-527 includes advanced audio calibration technology, enabling automatic speaker setup and optimization. This ensures optimal audio performance in any listening environment. Moreover, the receiver offers support for multi-zone audio, allowing for the distribution of audio throughout the house. This feature enables users to enjoy music in multiple rooms, providing a seamless and synchronized audio experience. Overall, the Pioneer VSX-527 is a feature-rich receiver that delivers high-quality audio performance and offers convenient connectivity options. It is a reliable and durable choice for those seeking an enhanced home audio experience.

General
BrandPioneer
ModelVSX-527
Productreceiver
EAN4988028163579, 4988028181078
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-527 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer VSX-527 receiver to my TV?

Ensure you have an HDMI cable, then connect one end to the HDMI output on the receiver and the other end to the HDMI input on your TV. Make sure to select the corresponding HDMI input on your TV for audio and video playback.

What is the optimal speaker setup for my Pioneer VSX-527?

For an ideal surround sound experience, position your speakers in a 5.1-channel configuration. Place two front speakers at equal distances from the TV, a center speaker above or below the TV, two surround speakers to your sides, and a subwoofer for deep bass near the front speakers.

How can I adjust the bass and treble settings on my Pioneer VSX-527?

To adjust the audio characteristics, go to the receiver's menu, select the "Sound" or "Audio" option, and then look for the "Tone Control" settings. From there, you can fine-tune the bass and treble levels to match your preferences.

Why is there no sound coming from my Pioneer VSX-527 receiver?

First, make sure your speakers are properly connected to the receiver. Then, verify that the receiver is set to the correct audio input and that the volume is turned up. Additionally, ensure that no mute function is activated and that the speaker wires are not damaged or disconnected.

How can I set up and use the built-in radio tuner on my Pioneer VSX-527?

To set up the radio tuner, connect the FM antenna to the dedicated FM antenna port on the back of the receiver. Then, press the "Tuner" button on the receiver's remote control to access the radio mode. Use the channel buttons or the tuning knob to search for and select your desired radio stations.

Is the manual of the Pioneer VSX-527 available in English?

Yes, the manual of the Pioneer VSX-527 is available in English .

Is your question not listed? Ask your question here

No results