Pioneer VSX-524-K manual

Pioneer VSX-524-K
7.5 · 1
PDF manual
 · 40 pages
English
manualPioneer VSX-524-K

Additional information

07
36
En
07

Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isn’t sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work.• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.
General
The power does not turn on.
Disconnect the power plug from the outlet, and insert again.
Make sure there are no loose strands of speaker wire touching
the rear panel. This could cause the receiver to shut off
automatically.
The receiver suddenly switches off.
When the Auto Power Down function is working, the power
will automatically turn off if the receiver has not operated for
several hours. Check the setting for the Auto Power Down
function (see The Auto Power Down menu on page 34).
After about a minute (you won’t be able to switch the unit on
during this time), switch the receiver back on. If the message
persists, call a Pioneer authorized independent service
company.
If there is very little low frequency information in the source
material, change your speaker settings to Front: SMALL /
Subwoofer: YES, or Front: LARGE / Subwoofer: PLUS
(page 32).
The HDMI indicator blinks and the power does not turn
on.
The receiver may have a serious problem. Do not try switching
the receiver on. Unplug the receiver from the wall and call a
Pioneer authorized independent service company.
Power automatically turns ON/OFF and the input
switches from one to another. (When the ARC function is
ON)
The CEC (Consumer Electronic Control) function may activate
when the ARC function is turned ON, causing power to turn
ON and OFF and the input to switch from one to another.
Since this unit does not guarantee synchronized operation
based on the CEC function, turn OFF the HDMI CONTROL
setting on the connected player. Refer to the relevant device’s
instruction manual for details.
If this does not work, turn OFF the ARC function. If this is the
case, listen to the TV audio after connecting this unit and the
TV with an audio cable.
OVERHEAT shows in the display and the power turns off.
The temperature within the unit has exceeded the allowable
value. Try moving the unit for better ventilation (page 2).
Lower the volume level.
TEMP shows in the display and the volume level drops.
The temperature within the unit has exceeded the allowable
value. Try moving the unit for better ventilation (page 2).
Lower the volume level.
No sound is output when an input function is selected.
Use
VOLUME +/–
to turn up the volume.
Press
MUTE
on the remote control to turn muting off.
Set the
SIGNAL SEL
to H (HDMI), C1/O1 (digital) or A
(analog) according to the type of connections made (page 22).
Make sure the component is connected correctly (see
Connecting your equipment on page 10).
Check the audio output settings of the source component.
Refer to the instruction manual supplied with the source
component.
No image is output when an input function is selected.
Make sure the component is connected correctly (see
Connecting your equipment on page 10).
Use the same type of video cables for the source component
and TV to connect to this receiver (see About video outputs
connection on page 13).
The video input selected on the TV monitor is incorrect. Refer
to the instruction manual supplied with the TV.
No sound from subwoofer.
Make sure the subwoofer is switched on.
If the subwoofer has a volume knob, make sure it’s turned up.
The Dolby Digital or DTS source you are listening to may not
have an LFE channel.
Switch the subwoofer setting in Speaker Setting on page 32 to
YES or PLUS.
Switch the LFE ATT (LFE Attenuate) on page 31 to LFEATT 0 or
LFEATT 5.
No sound from surround or center speakers.
Connect the speakers properly (page 11).
Refer to Speaker Setting on page 32 to check the speaker
settings.
Refer to Channel Level on page 33 to check the speaker levels.
The Phase Control feature doesn’t seem to have an
audible effect.
If applicable, check that the lowpass filter switch on your
subwoofer is off, or the lowpass cutoff is set to the highest
frequency setting. If there is a PHASE setting on your
subwoofer, set it to 0º (or depending on the subwoofer, the
setting where you think it has the best overall effect on the
sound).
Make sure the speaker distance setting is correct for all
speakers (see Speaker Distance on page 34).
Considerable noise in radio broadcasts.
Connect the antenna (page 16) and adjust the position for
best reception.
Route any loose cables away from the antenna terminals and
wires.
Fully extend the FM wire antenna, position for best reception,
and secure to a wall (or connect an outdoor FM antenna).
Connect an additional internal or external AM antenna
(page 16).
Turn off equipment causing interference or move it away from
the receiver (or move antennas farther away from equipment
causing noise).
Broadcast stations cannot be selected automatically.
Connect an outdoor antenna (page 16).
Noise during playback of a cassette deck.
Move the cassette deck away from your receiver, until the
noise disappears.
No sound is output or a noise is output when software
with DTS is played back.
Make sure the player’s settings are correct and/or the DTS
signal out is on. Refer to the instruction manual supplied with
the DVD player.
There seems to be a time lag between the speakers and
the output of the subwoofer.
See Automatically setting up for surround sound (MCACC) on
page 19 to set up your system again using MCACC (this will
VSX-523_PWXE_En.book 36 ペー   

View the manual for the Pioneer VSX-524-K here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-524-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
A
alan statesJanuary 21, 2022

Tv has multiple HDMI inputs available. Does receiver need to be connected to any particular one? On HDMI2, the tv says no inpu, check source.

1 comment
G
Gualberto BeAugust 26, 2022

Just the first input it's easier that way

T
Teddy WindhamFebruary 23, 2023

If I lost my remote how can I access my menu featers or can I

P
Paul McCabeJanuary 29, 2022

I've lost my manual. how do I adjust Bass Treble, Midrange and balance on my VSX 524? Many thanks

P
PerryJuly 19, 2023

How to turn off HDMI light keeps on blinking

T
TRUDY bowlingMarch 8, 2023

how do i download it. is there a cost of

The Pioneer VSX-524-K is a receiver designed to enhance the audio experience in your home entertainment system. It offers a range of features to ensure high-quality sound reproduction. With 140 watts per channel, the VSX-524-K delivers powerful and clear audio. It features 5.1-channel surround sound, allowing for a more immersive audio experience. The receiver also supports Dolby TrueHD and DTS-HD Master Audio formats, providing enhanced sound quality for your movies and music. The VSX-524-K offers multiple connectivity options, including HDMI inputs and outputs, allowing for easy integration with other devices such as your TV or Blu-ray player. It also includes a front USB port, making it convenient to connect and play music directly from your portable devices. This receiver is equipped with Pioneer's Advanced Sound Retriever, which enhances compressed audio files, providing a more accurate and dynamic sound reproduction. It also features a built-in AM/FM tuner, allowing you to listen to your favorite radio stations. The VSX-524-K is designed with ease of use in mind, featuring a user-friendly interface and a simple remote control. It has a compact and sleek design that will complement any home theater setup. In summary, the Pioneer VSX-524-K is a reliable and versatile receiver that offers high-quality sound reproduction and a range of connectivity options. It is a suitable choice for enhancing your home entertainment system's audio experience.

General
BrandPioneer
ModelVSX-524-K | VSX-524-K
Productreceiver
EAN0884938257961
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-524-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Why is the sound distorted or too quiet when playing audio through the receiver?

Ensure that the speaker cables are properly connected to the receiver and speakers, as loose connections can cause sound issues. Additionally, check the audio settings on the receiver to ensure proper levels are set and that any audio enhancements or effects are disabled.

How can I set up the receiver to work with my TV and other devices?

Connect the HDMI output of your TV or cable/satellite box to the HDMI input on the receiver. Then, connect your speakers to the receiver. Use the receiver's input selector to choose the appropriate HDMI input for your desired device. Adjust the volume levels as needed.

My remote control is not working with the receiver. What should I do?

First, make sure the batteries in the remote control are fresh and properly inserted. If that doesn't solve the issue, try pointing the remote directly at the receiver's sensor and ensure that there are no obstructions between them. Additionally, check the receiver's settings to ensure that the remote control function is enabled.

How do I calibrate the speakers for optimal audio performance?

The receiver has an automatic speaker calibration feature. Locate the "Auto MCACC" button on the receiver or remote control and press it to initiate the calibration process. Make sure to follow the on-screen instructions, which will guide you through the necessary microphone setup and speaker positioning for optimal audio quality.

How can I troubleshoot connectivity issues with my Pioneer VSX-524-K?

If you are experiencing connectivity issues, try power cycling all devices involved, including the receiver, TV, and any connected devices. Ensure that the cables are securely connected and not damaged. If the problem persists, check for any firmware updates for the receiver and update it if available. If necessary, consult the Pioneer website or contact their customer support for further assistance.

Is the manual of the Pioneer VSX-524-K available in English?

Yes, the manual of the Pioneer VSX-524-K is available in English .

Is your question not listed? Ask your question here

No results