Pioneer VSX-524-K manual

Pioneer VSX-524-K
7.5 · 1
PDF manual
 · 40 pages
English
manualPioneer VSX-524-K

Listening to your system

05
30
En
05

Better sound using Phase Control

This receiver’s Phase Control feature uses phase correction
measures to make sure your sound source arrives at the
listening position in phase, preventing unwanted distortion
and/or coloring of the sound.
Phase Control technology provides coherent sound
reproduction through the use of phase matching for an
optimal sound image at your listening position. The default
setting is on and we recommend leaving Phase Control
switched on for all sound sources.
Press
PHASE
to switch the P.CTL (Phase Control) ON or
OFF.
Note
Phase matching is a very important factor in achieving
proper sound reproduction. If two waveforms are ‘in
phase’, they crest and trough together, resulting in
increased amplitude, clarity and presence of the sound
signal. If a crest of a wave meets a trough, then the sound
will be ‘out of phase’ and an unreliable sound image will
be produced.
If your subwoofer has a phase control switch, set it to the
plus (+) sign (or 0°). However, the effect you can actually
feel when Phase Control is set to ON on this receiver
depends on the type of your subwoofer. Set your
subwoofer to maximize the effect. It is also recommended
you try changing the orientation or the place of your
subwoofer.
Set the built-in lowpass filter switch of your subwoofer to
OFF. If this cannot be done on your subwoofer, set the
cutoff frequency to a higher value.
If the speaker distance is not properly set, you may not
have a maximized Phase Control effect.
The Phase Control mode cannot be set to ON in the
following cases:
-
When the PURE DIRECT mode is switched on.
-
When the headphones are connected.

Setting the Audio options

There are a number of additional sound settings you can
make using the AUDIO PARAMETER menu. The defaults, if
not stated, are listed in bold.
Important
Note that if a setting doesn’t appear in the AUDIO
PARAMETER menu, it is unavailable due to the current
source, settings and status of the receiver.
1
Press , then press
AUDIO PARAMETER
button.
2
Use
/
to select the setting you want to adjust.
Depending on the current status/mode of the receiver,
certain options may not be able to be selected. Check the
table below for notes on this.
3
Use
/
to set it as necessary.
See the table below for the options available for each
setting.
4
Press
RETURN
to confirm and exit the menu.
SIGNAL SEL
SLEEP
INPUT
RECEIVER
RECEIVER
SOURCE
ENTER
MUTE
RETURN
AUDIO
PARAMETER
MENU
HOME
MENU
TOOLS
BAND
iPod CTRL
PTY
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
RECEIVER
VSX-523_PWXE_En.book 30 ペー   

View the manual for the Pioneer VSX-524-K here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-524-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
A
alan statesJanuary 21, 2022

Tv has multiple HDMI inputs available. Does receiver need to be connected to any particular one? On HDMI2, the tv says no inpu, check source.

1 comment
G
Gualberto BeAugust 26, 2022

Just the first input it's easier that way

T
Teddy WindhamFebruary 23, 2023

If I lost my remote how can I access my menu featers or can I

P
Paul McCabeJanuary 29, 2022

I've lost my manual. how do I adjust Bass Treble, Midrange and balance on my VSX 524? Many thanks

P
PerryJuly 19, 2023

How to turn off HDMI light keeps on blinking

T
TRUDY bowlingMarch 8, 2023

how do i download it. is there a cost of

The Pioneer VSX-524-K is a receiver designed to enhance the audio experience in your home entertainment system. It offers a range of features to ensure high-quality sound reproduction. With 140 watts per channel, the VSX-524-K delivers powerful and clear audio. It features 5.1-channel surround sound, allowing for a more immersive audio experience. The receiver also supports Dolby TrueHD and DTS-HD Master Audio formats, providing enhanced sound quality for your movies and music. The VSX-524-K offers multiple connectivity options, including HDMI inputs and outputs, allowing for easy integration with other devices such as your TV or Blu-ray player. It also includes a front USB port, making it convenient to connect and play music directly from your portable devices. This receiver is equipped with Pioneer's Advanced Sound Retriever, which enhances compressed audio files, providing a more accurate and dynamic sound reproduction. It also features a built-in AM/FM tuner, allowing you to listen to your favorite radio stations. The VSX-524-K is designed with ease of use in mind, featuring a user-friendly interface and a simple remote control. It has a compact and sleek design that will complement any home theater setup. In summary, the Pioneer VSX-524-K is a reliable and versatile receiver that offers high-quality sound reproduction and a range of connectivity options. It is a suitable choice for enhancing your home entertainment system's audio experience.

General
BrandPioneer
ModelVSX-524-K | VSX-524-K
Productreceiver
EAN0884938257961
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-524-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Why is the sound distorted or too quiet when playing audio through the receiver?

Ensure that the speaker cables are properly connected to the receiver and speakers, as loose connections can cause sound issues. Additionally, check the audio settings on the receiver to ensure proper levels are set and that any audio enhancements or effects are disabled.

How can I set up the receiver to work with my TV and other devices?

Connect the HDMI output of your TV or cable/satellite box to the HDMI input on the receiver. Then, connect your speakers to the receiver. Use the receiver's input selector to choose the appropriate HDMI input for your desired device. Adjust the volume levels as needed.

My remote control is not working with the receiver. What should I do?

First, make sure the batteries in the remote control are fresh and properly inserted. If that doesn't solve the issue, try pointing the remote directly at the receiver's sensor and ensure that there are no obstructions between them. Additionally, check the receiver's settings to ensure that the remote control function is enabled.

How do I calibrate the speakers for optimal audio performance?

The receiver has an automatic speaker calibration feature. Locate the "Auto MCACC" button on the receiver or remote control and press it to initiate the calibration process. Make sure to follow the on-screen instructions, which will guide you through the necessary microphone setup and speaker positioning for optimal audio quality.

How can I troubleshoot connectivity issues with my Pioneer VSX-524-K?

If you are experiencing connectivity issues, try power cycling all devices involved, including the receiver, TV, and any connected devices. Ensure that the cables are securely connected and not damaged. If the problem persists, check for any firmware updates for the receiver and update it if available. If necessary, consult the Pioneer website or contact their customer support for further assistance.

Is the manual of the Pioneer VSX-524-K available in English?

Yes, the manual of the Pioneer VSX-524-K is available in English .

Is your question not listed? Ask your question here

No results