Pioneer VSX-522 manual

Pioneer VSX-522
8.4 · 22
PDF manual
 · 39 pages
English
manualPioneer VSX-522

Listening to your system

5
5
28

Setting the Audio options

There are a number of additional sound settings you can
make using the AUDIO PARAMETER menu. The defaults, if
not stated, are listed in bold.
Important
Note that if a setting doesn’t appear in the AUDIO
PARAMETER menu, it is unavailable due to the current
source, settings and status of the receiver.
1
Press , then press
AUDIO PARAMETER
button.
2
Use
/
to select the setting you want to adjust.
Depending on the current status/mode of the receiver,
certain options may not be able to be selected. Check the
table below for notes on this.
3
Use
/
to set it as necessary.
See the table below for the options available for each
setting.
4
Press
RETURN
to confirm and exit the menu.
RECEIVER
Setting/What it does Option(s)
EQ (Acoustic Calibration EQ)
Switches on/off the effect of Acoustic
Calibration EQ.
ON
OFF
S.DELAY (Sound Delay)
Some monitors have a slight delay when
showing video, so the soundtrack will be
slightly out of sync with the picture. By adding
a bit of delay, you can adjust the sound to
match the presentation of the video.
0.0 to 9.0
(frames)
1 second = 30
frames (NTSC)
Default: 0.0
MIDNIGHT/LOUDNESS
a
The MIDNIGHT allows you to hear effective
surround sound of movies at low volumes.
The LOUDNESS is used to get good bass and
treble from music sources at low volumes.
M/L OFF
MIDNIGHT
LOUDNESS
S.RTV (Sound Retriever)
b
When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
OFF
c
ON
DUAL MONO
d
Specifies how dual mono encoded Dolby
Digital soundtracks should be played.
CH1 – Channel 1
is heard only
CH2 – Channel 2
is heard only
CH1 CH2 – Both
channels heard
from front
speakers
F.PCM (Fixed PCM)
This is useful if you find there is a slight delay
before OFF recognizes the PCM signal on a
CD, for instance.
When ON is selected, noise may be output
during playback of non-PCM sources. Please
select another input signal if this is a problem.
OFF
ON
DRC (Dynamic Range Control)
Adjusts the level of dynamic range for movie
soundtracks optimized for Dolby Digital, DTS,
Dolby Digital Plus, Dolby TrueHD, DTS-HD
and DTS-HD Master Audio (you may need to
use this feature when listening to surround
sound at low volumes).
AUTO
e
MAX
MID
OFF
LFE ATT (LFE Attenuate)
Some Dolby Digital and DTS audio sources
include ultra-low bass tones. Set the LFE
attenuator as necessary to prevent the ultra-
low bass tones from distorting the sound from
the speakers.
The LFE is not limited when set to 0 dB, which
is the recommended value. When set to –15
dB, the LFE is limited by the respective
degree. When OFF is selected, no sound is
output from the LFE channel.
0 (0 dB)
5 (–5 dB)
10 (–10 dB)
15 (–15 dB)
20 (–20 dB)
** (OFF)
SACD G. (SACD Gain)
f
Brings out detail in SACDs by maximizing the
dynamic range (during digital processing).
0 (0 dB)
+6 (+6 dB)
HDMI (HDMI Audio)
Specifies the routing of the HDMI audio signal
out of this receiver (AMP) or through to a TV
(THRU). When THRU is selected, no sound is
output from this receiver.
AMP
THRU
A.DLY (Auto Delay)
g
This feature automatically corrects the audio-
to-video delay between components
connected with an HDMI cable. The audio
delay time is set depending on the operational
status of the display connected with an HDMI
cable. The video delay time is automatically
adjusted according to the audio delay time.
OFF
ON
C.WIDTH (Center Width)
h
(Applicable only when using a center speaker)
Spreads the center channel between the front
right and left speakers, making it sound wider
(higher settings) or narrower (lower settings).
0 to 7
Default: 3
Setting/What it does Option(s)

View the manual for the Pioneer VSX-522 here, for free. This manual comes under the category receivers and has been rated by 22 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-522 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 22
D
Diego diaz tunOctober 16, 2022

My equipment completely turned off, it is a Pioneer receiver VSX-522, can someone tell me how to unlock it by pressing a button that should not have turned it off and it does not turn on, friends or in any other way that I could do?

My equipment completely turned off, it is a Pioneer receiver VSX-522, can someone tell me how to unlock it by pressing a butt...
zoom-in
View photo
This message has been automatically translated
A
Alden KisonJanuary 10, 2024

No sound comes out from the speakers when using a wireless mic, setting on sat/cable A or or 01. How do I troubleshoot?

No sound comes out from the speakers when using a wireless mic, setting on sat/cable A or or 01.  How do I troubleshoot?
zoom-in
View photo
1 comment
E
Emma of manua.lsFebruary 13, 2024

To resolve the problem of no sound coming out from the speakers when using a wireless mic with the Pioneer VSX-522 receiver, you can try the following steps: 1. Check the connections: Make sure the wireless mic is properly connected to the receiver. Ensure that the cables are securely plugged in and there are no loose connections. 2. Verify the input settings: Confirm that the input source on the receiver is set to "sat/cable A" or "01" for the wireless mic. Use the input selector on the receiver or remote control to switch to the correct input. 3. Check the volume levels: Ensure that the volume level for the wireless mic input is not set to zero or muted. Use the volume control on the receiver or remote control to increase the volume. 4. Test with another audio source: Connect a different audio source, like a DVD player or smartphone, to the receiver and check if there is sound output. This will help determine if the issue is specific to the wireless mic or a general audio problem. 5. Reset the receiver: If the above steps do not solve the issue, try resetting the receiver.

This answer is automatically generated
D
Dan hammond October 28, 2023

Want to Mate my Pioneer Be able to pick up Bluetooth. Go to USX 522 K What do you recommend? What's your savor I'm Bluetooth for safer, that is to use.

Want to Mate my Pioneer Be able to pick up Bluetooth. Go to USX 522 K What do you recommend? What's your savor I'm Bluetooth ...
zoom-in
View photo
C
CaseyApril 19, 2022

Why does my pioneer vsx 522 play like a skipping c d and is there a specific way it has to be hooked up before it will play

J
joe spedusMarch 15, 2023

have this unit and 6 speakers 2 driven from accessory amp. how do i connect and place my 4 new atmos speakers for a 7.1.4 configuration

A
Alden KisonJanuary 10, 2024

Can i use this as a karaoke machine if i connect a wireless mic and playing you tube karaoke on sat/cable setting. No sound (vocals)comes out from the speakers

Can i use this as a karaoke machine if i connect a wireless mic and playing you tube karaoke on sat/cable setting.  No sound ...
zoom-in
View photo
T
Terry October 19, 2023

How do I connect my VSX 522 to my smart TV to play streaming shows through my speakers?

V
VuyaniApril 22, 2024

What causes no sound out of speakers when Dolby pro Logic and Dts is selected

J
John E LewisNovember 12, 2021

How do I play songs from my cell phone through this system?

M
Manasseh ArhinJuly 16, 2022

why is it that the sound doesn't come apart from pure direct option select

The Pioneer VSX-522 is a receiver designed for audio enthusiasts. With its sleek and modern design, it seamlessly integrates into any home theater setup. This receiver is equipped with various features that enhance the audio experience. The Pioneer VSX-522 supports multiple audio formats, including Dolby Digital and DTS. This allows for a more immersive sound experience while watching movies or listening to music. The receiver also has a built-in AM/FM tuner, providing access to a wide range of radio stations. With its HDMI connectivity, the Pioneer VSX-522 can be easily connected to compatible devices such as Blu-ray players and gaming consoles. This ensures high-quality audio and video playback. Additionally, the receiver has multiple input and output options, allowing for seamless integration with other audio equipment. The Pioneer VSX-522 offers convenient control options. It can be operated using the included remote control or through the Pioneer ControlApp, which allows for easy control through a smartphone or tablet. The receiver also has a user-friendly interface, making it easy to adjust settings and customize the audio experience. In terms of power, the Pioneer VSX-522 delivers clear and balanced sound. With its built-in amplifier, it provides ample power to drive speakers and deliver high-quality audio performance. Overall, the Pioneer VSX-522 is a reliable and versatile receiver that enhances the audio experience. Its advanced features, connectivity options, and user-friendly interface make it a great choice for audio enthusiasts looking to elevate their home theater setup.

General
BrandPioneer
ModelVSX-522
Productreceiver
EAN0884938163545
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-522 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my speakers to the Pioneer VSX-522 receiver?

Ensure the positive and negative terminals on the receiver match those on your speakers, then connect the speaker wires securely for optimal sound quality.

What is the best audio setup for my home theater system using the Pioneer VSX-522?

To maximize your home theater experience, a recommended setup would consist of a 5.1 channel surround sound, utilizing front, center, and surround speakers along with a subwoofer.

How can I adjust the audio settings on the Pioneer VSX-522?

Access the receiver's audio settings menu through the on-screen display or the front panel display and tailor parameters such as bass, treble, and equalizer settings to your personal preference.

How can I optimize the video quality on my TV when using the Pioneer VSX-522 receiver?

Make sure you connect your video source (such as a Blu-ray player or game console) directly to the HDMI input on the receiver, then use a high-quality HDMI cable to connect the receiver's HDMI Out port to your TV. This will ensure a seamless transmission of high-definition video signals.

How can I troubleshoot common issues like no sound or distorted audio on the Pioneer VSX-522?

Firstly, check that all speaker connections are secure. If the issue persists, ensure the correct input source is selected, and check the volume levels. If you are using external devices, verify their audio settings and connectivity. If problems persist, power cycle the receiver and connected devices to reset the system.

Is the manual of the Pioneer VSX-522 available in English?

Yes, the manual of the Pioneer VSX-522 is available in English .

Is your question not listed? Ask your question here

No results