Pioneer VSX-521-K manual

Pioneer VSX-521-K
8.5 · 9
PDF manual
 · 120 pages
English
manualPioneer VSX-521-K
21
Es
English
Français
Español
04
04

Capítulo 4:

Reproducción básica

Reproducción de una fuente

Las siguientes son las instrucciones básicas para reproducir
una fuente (como un disco DVD) en el sistema de cine en
casa.
1
Encienda los componentes del sistema y el receptor.
Encienda primero el componente de reproducción (por
ejemplo, un reproductor de DVD), el televisor y el subwoofer
(si tiene uno) y, a continuación, encienda el receptor (pulse
RECEIVER).
• Asegúrese de que el micrófono de configuración esté
desconectado.
2
Conecte la entrada de TV a la entrada que conecta con
este receptor.
Por ejemplo, si ha conectado este receptor a las tomas de
VIDEO del TV, asegúrese de que la entrada de VIDEO está
seleccionada.
3
Pulse los botones de función de entrada para
seleccionar la función de entrada que desee reproducir.
La entrada del receptor cambiará según corresponda, de
modo que podrá hacer funcionar otros componentes
mediante el mando a distancia. Para operar el receptor,
en primer lugar pulse en el mando a distancia,
luego pulse el botón pertinente para la función deseada.
• La fuente de entrada también se puede seleccionar
mediante los botones de INPUT SELECT del
mando a distancia, o mediante el dial INPUT SELECTOR
del panel frontal. En este caso, el mando a distancia no
cambia a los modos operativos.
Si ha seleccionado la fuente de entrada adecuada y sigue sin
haber sonido, seleccione la señal de entrada de audio que
desee reproducir (véase más abajo Selección de la señal de
entrada de audio).
4
Pulse AUTO/DIRECT para seleccionar ‘AUTO
SURROUND’ y empezar a reproducir la fuente.
Si reproduce un disco DVD con sonido envolvente Dolby
Digital o DTS, con una conexión de audio digital, deberá
escuchar un sonido envolvente. Si reproduce una fuente
estéreo o si la conexión es de audio analógico, sólo los
altavoces delanteros izquierdo/derecho emitirán sonido en el
modo de audición predeterminado.
Puede comprobar en la pantalla del panel frontal si la
reproducción de sonido envolvente se está llevando a cabo
de forma correcta.
Cuando se usa un altavoz de sonido envolvente trasero,
2D+PLIIx se visualiza cuando se reproducen señales Dolby
Digital de 5.1 canales, y DTS+NEO:6 se visualiza cuando se
reproducen señales DTS de 5.1 canales.
Cuando no se usa un altavoz de sonido envolvente trasero,
2D se visualiza cuando se reproducen señales Dolby
Digital.
Si la visualización no corresponde a la señal de entrada ni al
modo de escucha, verifique las conexiones y la
configuración.
Nota
• Es aconsejable que compruebe los ajustes de salida de
audio digital en el reproductor de DVD o en el receptor
satélite digital. Se debe ajustar para emitir audio Dolby
Digital, DTS y PCM de 88,2 kHz / 96 kHz (2 canales) y, si
hay una opción para audio MPEG, se debe ajustar para
convertir el audio MPEG a PCM.
Dependiendo del reproductor de DVD o de los discos que
utilice, es posible que sólo obtenga sonido estéreo digital
de 2 canales y sonido analógico. En este caso, si desea un
sonido envolvente multicanal, deberá ajustar el receptor
a un modo de escucha multicanal.
5
Use MASTER VOLUME para ajustar el nivel del volumen.
Reduzca el nivel de volumen en el televisor de modo que
escuche solamente el sonido emitido por los altavoces
conectados al receptor.
Selección de la señal de entrada de audio
Se puede seleccionar la señal de entrada de audio para cada
fuente de entrada. Una vez ajustada, la entrada de audio que
se ha seleccionado se aplicará siempre que elija la fuente de
entrada utilizando los botones de función de entrada.
Pulse SIGNAL SEL para seleccionar la señal de entrada
de audio que corresponda al componente fuente.
Cada pulsación alterna entre lo siguiente:
H – Selecciona una señal HDMI. Puede seleccionarse H
para la entrada de BD, DVD, DVR/BDR o VIDEO. Para
otras entradas, no puede seleccionarse H.
-
Cuando la opción HDMI de Ajuste de las opciones de
Audio en la página 28 se ajusta a THRU, el sonido lo
emite el televisor, no el receptor.
A – Para seleccionar las entradas analógicas.
C1/O1/O2 – Para seleccionar la entrada digital. La
entrada coaxial 1 se selecciona para C1, y la entrada de
sonido óptico 1 ó 2 se selecciona para O1 u O2.
Cuando se selecciona H (HDMI) o C1/O1/O2 (digital) y no se
recibe la entrada de audio seleccionada, se selecciona A
(analógico) automáticamente.
Nota
• La entrada VIDEO está fijada para H (HDMI). No puede
modificarse.
• Para la entrada TV/SAT, sólo puede seleccionarse A
(analógico) o C1/O1/O2 (digital). No obstante, si el ARC
en HDMI Setup se ajusta en ON, la entrada queda fijada
en H (HDMI) y no puede modificarse.
Cuando se ajusta en H (HDMI) o C1/O1/O2 (digital), 2
se ilumina cuando entra una señal Dolby Signal y DTS se
ilumina cuando entra una señal DTS.
• Cuando H (HDMI) está seleccionado, los indicadores A y
DIGITAL están desactivados (consulte la página 7).
INPUT SELECT
SOURCESLEEP
TV
CONTROL
INPUT
RECEIVER
CH
VOL
RECEIVER
BD DVD TV
DVR/BDR
CD
CD-R
ADAPTER
TUNER
PORTABLE
VIDEO
SIGNAL SELS.RETRIEVER
DTV/TV
ENTER
ADV SURR
AUTO/
DIRECT
MUTE
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
BAND
MENU
TRE
BASS
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
BD MENU
HOME
MENU
SETUP
ALC/
STANDARD
STEREO
RECEIVER
CH
VOL
DVR/BDR
CD
CD-R
ADAPTER
TUNER
PORTABLE
VIDEO
SIGNAL SELS.RETRIEVER
VSX-521_UCSMXCN_Es.book 21 ページ 󲃟󲃝󲃞󲃝年󲃞󲃟月󲃟󲃞日 火曜日 午後󲃞󲃟時󲃞8分

View the manual for the Pioneer VSX-521-K here, for free. This manual comes under the category receivers and has been rated by 9 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-521-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
V
Varga istvánSeptember 2, 2020

Hi, I have a question. I connected the receiver to the TV via HDMI-1, and when I turn off the TV or unplug the receiver, the receiver also turns off and doesn't turn back on unless I reconnect it to the TV. Thank you very much in advance for your response, it's very important.

This message has been automatically translated
A
Alvin BergJanuary 16, 2022

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?
zoom-in
View photo
This message has been automatically translated
J
Jim LowDecember 29, 2022

Does this model have the option of selecting between A or B speakers?

T
TitoFebruary 4, 2024

Where do connect a turntable

Where do connect a turntable
zoom-in
View photo

The Pioneer VSX-521-K is an audio receiver that delivers a RMS rated power of 550 watts. With a Signal-to-Noise Ratio (SNR) of 79 dB, it offers clear and high-quality sound. The Total Harmonic Distortion (THD) is impressively low at 0.05%, ensuring accurate audio reproduction without any noticeable distortion. This receiver has an impedance of 8 Ω, which is a commonly used standard for audio equipment. It supports 5.1 channels, providing an immersive audio experience with multiple speakers for surround sound. In terms of connectivity, the Pioneer VSX-521-K offers various options. It has multichannel audio input and output terminals, allowing for convenient connection to compatible devices. Additionally, it features two digital audio optical inputs and one digital audio coaxial input, enabling the transmission of high-quality digital audio signals. For video connectivity, the receiver is equipped with two component video inputs, four HDMI inputs, and one composite video input. These inputs allow for the integration of video components into the audio setup. The Pioneer VSX-521-K includes one HDMI output, which can be connected to a compatible display device. This output allows for seamless video transmission. Overall, the Pioneer VSX-521-K is a versatile audio receiver with ample power and connectivity options. Its low distortion and high SNR ensure accurate and clear audio reproduction, while the multiple input and output options make it suitable for a variety of audio and video setups.

General
BrandPioneer
ModelVSX-521-K | VSX-521-K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
RMS rated power550 W
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Impedance8 Ω
Audio output channels5.1 channels
Frequency range20 - 20000 Hz
Power output per channel (20-20KHz@8 Ohm)- W
Power output per channel (1KHz@6 Ohm)125 W
Receiver type-
Technical details
Audio decodersDolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Apple docking compatibilityNot supported
AirPlayNo
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
Composite video in1
Outputs
Multichannel audio output typeTerminals
Number of HDMI outputs1
Composite video out1
Headphone outputs2
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9000 g
Width435 mm
Depth363 mm
Height168 mm
Network
Ethernet LANNo
Wi-FiNo
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)415 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Packaging content
ManualYes
Warranty cardYes
User guideYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-521-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a weight of 9000 g.

What is the height of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a height of 168 mm.

What is the width of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a width of 435 mm.

What is the depth of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a depth of 363 mm.

How do I connect my speakers to the Pioneer VSX-521-K receiver?

Make sure you connect the positive and negative terminals of each speaker to the corresponding terminals on the receiver. Remember to match the correct impedance and polarity for optimal sound performance.

How can I set up the auto-calibration feature on the receiver?

To use the auto-calibration feature, make sure you connect the included microphone to the receiver and place it at your listening position. Then, access the receiver's menu and follow the on-screen instructions to run the auto-calibration process, which will optimize the audio settings for your specific room.

How do I adjust the bass and treble settings on the Pioneer VSX-521-K?

To adjust the bass and treble settings, go to the receiver's menu and navigate to the audio settings. From there, you can easily modify the levels of bass and treble to suit your personal preferences.

How can I program the remote control to work with my TV?

To program the remote control to operate your TV, locate the remote's setup button and press it. Then, follow the on-screen instructions to enter the specific code for your TV brand. Once successfully programmed, the remote should control basic functions such as power, volume, and input selection for your TV.

How do I connect external devices, such as a Blu-ray player or game console, to the Pioneer receiver?

Connect the HDMI output of your external device to one of the HDMI inputs on the receiver. Then, using an HDMI cable, connect the HDMI output of the receiver to your TV or video display. Finally, select the appropriate HDMI input on the receiver to enjoy audio and video from your external device.

What is the RMS rated power of Pioneer VSX-521-K?

The RMS rated power of Pioneer VSX-521-K is 550 W. This means that it has a high power output, making it suitable for larger rooms or for those who want a louder audio experience.

What is the Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K?

The Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K is 79 dB. A higher SNR indicates that the receiver produces less background noise, resulting in clearer and more accurate audio playback.

What is the Total Harmonic Distortion (THD) of Pioneer VSX-521-K?

The Total Harmonic Distortion (THD) of Pioneer VSX-521-K is 0.05%. This means that the receiver maintains a low distortion level, ensuring that the audio is reproduced with high fidelity and minimal distortion.

What is the Impedance of Pioneer VSX-521-K?

The Impedance of Pioneer VSX-521-K is 8 Ω. This indicates the compatibility of the receiver with various speakers. Most speakers have an 8 Ω impedance rating, so this receiver should work well with a wide range of speakers.

How many audio output channels does Pioneer VSX-521-K have?

Pioneer VSX-521-K has 5.1 audio output channels. This means that it supports surround sound systems with five speakers and one subwoofer, resulting in a more immersive audio experience for the user.

Is the manual of the Pioneer VSX-521-K available in English?

Yes, the manual of the Pioneer VSX-521-K is available in English .

Is your question not listed? Ask your question here

No results