Pioneer VSX-521-K manual

Pioneer VSX-521-K
8.5 · 9
PDF manual
 · 120 pages
English
manualPioneer VSX-521-K

Control with HDMI function

07
34
En
07

Chapter 7:

Control with HDMI

function

Synchronized operations below with a Control with HDMI-
compatible Pioneer TV or Blu-ray Disc player or with a
component of another make that supports the Control with
HDMI functions are possible when the component is
connected to the receiver using an HDMI cable.
Synchronized amp mode
The receiver’s volume can be set and the sound can be
muted using the TV’s remote control.
Power synchronization with TV
Automatic switching of inputs
The receiver’s input switches over automatically when the
TV’s input is changed or a Control with HDMI-compatible
component is played.
Important
With Pioneer devices, the Control with HDMI functions
are referred to as “KURO LINK”.
You cannot use this function with components that do not
support Control with HDMI.
• We only guarantee this receiver will work with Pioneer
made Control with HDMI-compatible components and
components of other makes that support the Control
with HDMI function. However, we do not guarantee that
all synchronized operations will work with components of
other makes that support the Control with HDMI
function.
Use a High Speed HDMI
®
cable when you want to use the
Control with HDMI function. The Control with HDMI
function may not work properly if a different type of HDMI
cable is used.
For details about concrete operations, settings, etc., refer
to also the operating instructions for each component.

Making Control with HDMI connections

You can use synchronized operation for a connected TV and
up to four other components.
Be sure to connect the TV’s audio cable to the audio input
of this unit. When the TV and receiver are connected by
HDMI connections, if the TV supports the HDMI Audio
Return Channel function, the sound of the TV is input to
the receiver via the HDMI terminal, so there is no need to
connect an audio cable. In this case, set ARC at HDMI
Setup to ON (see HDMI Setup below).
For details, see Connecting using HDMI on page 14.
Important
When connecting this system or changing connections,
be sure to switch the power off and disconnect the power
cord from the wall socket.
After completing all connections, connect the power
cords to the wall socket.
• After this receiver is connected to an AC outlet, a 2
second to 10 second HDMI initialization process begins.
You cannot carry out any operations during initialization.
The HDMI indicator on the display unit blinks during
initialization, and you can turn this receiver on once it has
stopped blinking.
To get the most out of this function, we recommend that
you connect your HDMI component not to a TV but rather
directly to the HDMI terminal on this receiver.
While the receiver is equipped with four HDMI inputs, the
Control with HDMI function can only be used with up to
three DVD or Blu-ray Disc players or up to three DVD or
Blu-ray Disc recorders.

HDMI Setup

You must adjust the settings of this receiver as well as the
connected Control with HDMI-compatible components in
order to make use of the Control with HDMI function. For
more information see the operating instructions for each
component.
1
Switch on the receiver and your TV.
Press RECEIVER to switch on.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding composite or
component cable.
3
Press , then press SETUP.
The System Setup menu appears on your TV. Use ///
and ENTER on the remote control to navigate through the
screens and select menu items. Press RETURN to confirm
and exit the current menu.
•Press SETUP at any time to exit the System Setup menu.
4
Select ‘HDMI Setup’ from the System Setup menu.
5
Select the ‘Control’ setting you want.
Choose whether to set this unit’s Control with HDMI
function ON or OFF. You will need to set it to ON to use the
Control with HDMI function.
When using a component that does not support the Control
with HDMI function, set this to OFF.
ON – Enables the Control with HDMI function. When this
unit’s power is turned off and you have a supported
source begin playback while using the Control with
HDMI function, the audio and video outputs from the
HDMI connection are output from the TV.
OFFThe Control with HDMI is disabled. Synchronized
operations cannot be used. When this unit’s power is
turned off, audio and video of sources connected via
HDMI are not output.
RECEIVER
System Setup
1 . Auto MCACC
2 . Manual SP Setup
3 . Input
Assign
4 . Pre
Out Setting
5 . HDMI Setup
6 . Auto Power Down
7 . FL
Demo Mode
Return
5.HDMI Setup
Return
Control ON
ARC [ OFF ]
VSX-521_UCSMXCN_En.book 34 ページ 󲃟󲃝󲃞󲃝年󲃞󲃟月󲃟󲃞日 火曜日 午後󲃟時󲃠5分

View the manual for the Pioneer VSX-521-K here, for free. This manual comes under the category receivers and has been rated by 9 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-521-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
V
Varga istvánSeptember 2, 2020

Hi, I have a question. I connected the receiver to the TV via HDMI-1, and when I turn off the TV or unplug the receiver, the receiver also turns off and doesn't turn back on unless I reconnect it to the TV. Thank you very much in advance for your response, it's very important.

This message has been automatically translated
A
Alvin BergJanuary 16, 2022

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?
zoom-in
View photo
This message has been automatically translated
J
Jim LowDecember 29, 2022

Does this model have the option of selecting between A or B speakers?

T
TitoFebruary 4, 2024

Where do connect a turntable

Where do connect a turntable
zoom-in
View photo

The Pioneer VSX-521-K is an audio receiver that delivers a RMS rated power of 550 watts. With a Signal-to-Noise Ratio (SNR) of 79 dB, it offers clear and high-quality sound. The Total Harmonic Distortion (THD) is impressively low at 0.05%, ensuring accurate audio reproduction without any noticeable distortion. This receiver has an impedance of 8 Ω, which is a commonly used standard for audio equipment. It supports 5.1 channels, providing an immersive audio experience with multiple speakers for surround sound. In terms of connectivity, the Pioneer VSX-521-K offers various options. It has multichannel audio input and output terminals, allowing for convenient connection to compatible devices. Additionally, it features two digital audio optical inputs and one digital audio coaxial input, enabling the transmission of high-quality digital audio signals. For video connectivity, the receiver is equipped with two component video inputs, four HDMI inputs, and one composite video input. These inputs allow for the integration of video components into the audio setup. The Pioneer VSX-521-K includes one HDMI output, which can be connected to a compatible display device. This output allows for seamless video transmission. Overall, the Pioneer VSX-521-K is a versatile audio receiver with ample power and connectivity options. Its low distortion and high SNR ensure accurate and clear audio reproduction, while the multiple input and output options make it suitable for a variety of audio and video setups.

General
BrandPioneer
ModelVSX-521-K | VSX-521-K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
RMS rated power550 W
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Impedance8 Ω
Audio output channels5.1 channels
Frequency range20 - 20000 Hz
Power output per channel (20-20KHz@8 Ohm)- W
Power output per channel (1KHz@6 Ohm)125 W
Receiver type-
Technical details
Audio decodersDolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Apple docking compatibilityNot supported
AirPlayNo
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
Composite video in1
Outputs
Multichannel audio output typeTerminals
Number of HDMI outputs1
Composite video out1
Headphone outputs2
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9000 g
Width435 mm
Depth363 mm
Height168 mm
Network
Ethernet LANNo
Wi-FiNo
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)415 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Packaging content
ManualYes
Warranty cardYes
User guideYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-521-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a weight of 9000 g.

What is the height of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a height of 168 mm.

What is the width of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a width of 435 mm.

What is the depth of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a depth of 363 mm.

How do I connect my speakers to the Pioneer VSX-521-K receiver?

Make sure you connect the positive and negative terminals of each speaker to the corresponding terminals on the receiver. Remember to match the correct impedance and polarity for optimal sound performance.

How can I set up the auto-calibration feature on the receiver?

To use the auto-calibration feature, make sure you connect the included microphone to the receiver and place it at your listening position. Then, access the receiver's menu and follow the on-screen instructions to run the auto-calibration process, which will optimize the audio settings for your specific room.

How do I adjust the bass and treble settings on the Pioneer VSX-521-K?

To adjust the bass and treble settings, go to the receiver's menu and navigate to the audio settings. From there, you can easily modify the levels of bass and treble to suit your personal preferences.

How can I program the remote control to work with my TV?

To program the remote control to operate your TV, locate the remote's setup button and press it. Then, follow the on-screen instructions to enter the specific code for your TV brand. Once successfully programmed, the remote should control basic functions such as power, volume, and input selection for your TV.

How do I connect external devices, such as a Blu-ray player or game console, to the Pioneer receiver?

Connect the HDMI output of your external device to one of the HDMI inputs on the receiver. Then, using an HDMI cable, connect the HDMI output of the receiver to your TV or video display. Finally, select the appropriate HDMI input on the receiver to enjoy audio and video from your external device.

What is the RMS rated power of Pioneer VSX-521-K?

The RMS rated power of Pioneer VSX-521-K is 550 W. This means that it has a high power output, making it suitable for larger rooms or for those who want a louder audio experience.

What is the Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K?

The Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K is 79 dB. A higher SNR indicates that the receiver produces less background noise, resulting in clearer and more accurate audio playback.

What is the Total Harmonic Distortion (THD) of Pioneer VSX-521-K?

The Total Harmonic Distortion (THD) of Pioneer VSX-521-K is 0.05%. This means that the receiver maintains a low distortion level, ensuring that the audio is reproduced with high fidelity and minimal distortion.

What is the Impedance of Pioneer VSX-521-K?

The Impedance of Pioneer VSX-521-K is 8 Ω. This indicates the compatibility of the receiver with various speakers. Most speakers have an 8 Ω impedance rating, so this receiver should work well with a wide range of speakers.

How many audio output channels does Pioneer VSX-521-K have?

Pioneer VSX-521-K has 5.1 audio output channels. This means that it supports surround sound systems with five speakers and one subwoofer, resulting in a more immersive audio experience for the user.

Is the manual of the Pioneer VSX-521-K available in English?

Yes, the manual of the Pioneer VSX-521-K is available in English .

Is your question not listed? Ask your question here

No results